2013 MERCEDES-BENZ CLA COUPE warning

[x] Cancel search: warning

Page 97 of 373

MERCEDES-BENZ CLA COUPE 2013  Owners Manual tute for your attention when closing the roller
sunblind. G
WARNING
The reversing function does not react:
R to soft, light and thin objects, e.g. small fin-
gers
R when closing the roller sunblind ag

Page 98 of 373

MERCEDES-BENZ CLA COUPE 2013  Owners Manual Problems with the sliding sunroof
G
WARNING
If you do not reset the sliding sunroof after a malfunction or voltage supply interruption, then the
reversing function will malfunction or not work. The sl

Page 101 of 373

MERCEDES-BENZ CLA COUPE 2013  Owners Manual Useful information
i This Owner's Manual describes all mod-
els, series and optional equipment for your
vehicle that were available at the time of
going to press. National variations are pos- sibl

Page 102 of 373

MERCEDES-BENZ CLA COUPE 2013  Owners Manual The seat belt should:
R fit snugly across your body.
R be routed across the middle of your
shoulder.
R be routed across your hips in the pelvic
area.
X Before starting off, adjust the rear-view mir-
r

Page 104 of 373

MERCEDES-BENZ CLA COUPE 2013  Owners Manual Adjusting the head restraints
G
WARNING
You could lose control of the vehicle while
driving if you:
R adjust the driver's seat, steering wheel or
mirrors
R fasten the seat belt
There is a risk of

Page 105 of 373

MERCEDES-BENZ CLA COUPE 2013  Owners Manual Rear seat head restraints
Adjusting the rear seat head restraint
height
X
To raise: pull the head restraint up to the
desired height.
X To lower: press release catch :and push
the head restraint down

Page 106 of 373

MERCEDES-BENZ CLA COUPE 2013  Owners Manual AMG Performance Seat
To adjust the contour of the seat and for
improved lateral support, you can individually adjust the front seats. 9Adjusting the side bolsters of the seat
cushion X
To set the side

Page 107 of 373

MERCEDES-BENZ CLA COUPE 2013  Owners Manual Problems with the seat heating
Problem
Possible causes/consequences and
M
MSolutions The seat heating has
switched off prema-
turely or cannot be
switched on. The on-board voltage is too low because t