2013 MERCEDES-BENZ C-Class SEDAN garage door opener

Folding in/ou
t(electrically) ...........104
Folding in whe nlocking (on-board
computer) ...................................... 212
Out of position (troubleshooting) ...105
Setting ........................................... 104
Storing settings (memory function) 106
Storing the parking position ..........105
Eyeglasses compartment .................257 F
Fille rcap
see Fuel filler flap
First-aid kit ......................................... 296
Flat tire MOExtended run-fla tsystem ......... 297
Preparing the vehicle .....................297
see Emergency spare wheel
Floormats ........................................... 279
Fog lamps Switching on/off ........................... 111
Front fog lamps
Display message ............................ 225
Switching on/off ........................... 111
Fuel
Additives ........................................ 349
Consumption statistics ..................201
Displaying the current
consumption .................................. 202
Displaying the range ......................202
Driving tips .................................... 160
Flexible fuel vehicles ......................350
Fuel gauge ....................................... 31
Grade (gasoline) ............................ 349
Important safety notes ..................348
Notes for AMG vehicles .................349
Premium-grade unleaded gasoline .349
Problem (malfunction) ...................158
Refueling ........................................ 156
Tank content/reserve fuel .............348
Fuel filler flap
Emergency release ........................157
Opening/closing ............................ 156
Fuel level
Calling up the range (on-board
computer) ...................................... 202Fuel tank
Capacity ........................................ 348
Problem (malfunction) ...................158
see Fuel tank
Fuse allocation chart (vehicle tool
kit) ...................................................... 296
Fuses Allocation chart ............................. 306
Before changing ............................. 306
Dashboard fuse box .......................307
Fuse box in the engine
compartment ................................. 307
Fuse box in the trunk .....................308
Important safety notes ..................306
see Fuses G
Garage door opener Clearing the memory .....................278
Important safety notes ..................275
Opening/closing the garage door ..277
Programming (button in the rear-
view mirror) ................................... 275
Gear indicator (on-board computer) 212
Gear or selector lever (cleaning
guidelines) ......................................... 292
Genuine parts ...................................... 21
Glove box ........................................... 257 H
Handbrake see Parking brake
Hazard warning lamps ......................113
Headlamps Adding fluid to cleaning system .....287
Cleaning system (function) ............113
Cleaning system (notes) ................353
Fogging up ..................................... 115
see Automatic headlamp mode
Head restraints
Adjusting ......................................... 97
Adjusting (electrically). ....................98
Adjusting (manually). .......................98
Adjusting (rear) ................................ 9810
Index

Notes for AMG vehicles
.................349
Refueling proces s.......................... 156
see Fuel
Releasing the parking lock
manually (automatic transmission) 155
Remote control Garage door opener .......................275
Programming (garage door opener) 275
Reporting safety defects ....................26
Reserve (fuel tank) see Fuel
Reserve fuel
Display message ............................ 230
Warning lamp ................................. 250
see Fuel
Residual heat (climate control) ........136
Restraint system see SRS (Supplemental Restraint
System)
Reverse gear
Engaging (automatic transmission) 148
Reversing feature
Panorama sliding sunroo f................ 89
Roller sunblinds ............................... 91
Side windows ................................... 85
Sliding sunroo f................................. 89
Roadside Assistance (breakdown) ....23
Roller blind see Roller sunblind
Roller sunblind
Panorama roof with power tilt/
sliding panel ..................................... 91
Rea rside windows ......................... 263
Rea rwindow .................................. 263
Roof carrier ........................................ 261
Roof lining and carpets (cleaning
guidelines) ......................................... 293
Roof load (maximum) ........................355
Route (navigation) see Route guidance (navigation)
Route guidance (navigation) ............203 S
Safety Childre ninthe vehicle ..................... 58
Child restraint systems ....................58Occupant Classification System
(OCS)
............................................... 47
Overview of occupant safety
systems ........................................... 40
Safety system
see Driving safety systems
Seat belts
Adjusting the driver's and front-
passenger sea tbelt ......................... 56
Adjusting the height ......................... 57
Belt force limiters ............................ 58
Cleaning ......................................... 293
Correct usage .................................. 55
Emergency Tensioning Devices ....... .58
Fastening ......................................... 56
Important safety guidelines .............54
Releasing ......................................... 57
Safety guidelines ............................. 41
Switching belt adjustment on/off
(on-board computer) ......................212
Warning lamp ................................. 242
Warning lamp (function) ................... 57
see Seat belts
Seats
Adaptive sea tbackrests (AMG
vehicles) .......................................... 99
Adjusting (electrically). ....................96
Adjusting (manually and
electrically). ..................................... 96
Adjusting lumba rsuppor t................ 99
Adjusting the 4-way lumbar
support ............................................ 99
Adjusting the head restraint ............97
Cleaning the cover .........................292
Correct driver's seat position ........... 94
Important safety notes ....................95
Seat heating problem ....................101
Seat ventilation problem ................101
Storing settings (memory function) 106
Switching sea theating on/off .......100
Switching seat ventilation on/off ..101
Sensors (cleaning instructions) .......291
Service menu (on-board computer) .208
Service products Brake fluid ..................................... 352
Coolant (engine) ............................ 352
Engine oil ....................................... 351
Fuel ................................................ 347 Index
15

Overhea
dcontrol panel Function Page
0002
0001
Switches the rear-
compartment interior
lighting on/off 116
0003
001C
Switches the
automatic interio rlighting
control on/off 116
0022
0013
Switches the right-
hand reading lamp on/off 115
0021
0002
Opens/closes the
sliding sunroof 89
0002
Opens/closes the
panorama roof with power
tilt/sliding panel with roller
sunblinds 90
001F
0009
MB Info call button
(mbrace system) 270
0020
0008
SOS button (mbrace
system) 268 Function Page
0012
Rear-view mirror 103
0013
Buttons for the garage door
opener 277
0014
Integrated electronic
compass 278
0015
Microphone for mbrace
(emergency call system),
telephone and the Voice
Control System 1 0016
0007
Roadside Assistance
call button (mbrace
system) 270
0018
0013
Switches the left-
hand reading lamp on/off 115
0019
0004
Switches the front
interior lighting on/off 116
1
The Voice Control System is only available in combination with COMAND. Observe the additional operating
instructions. 36
Overhead control panelAt a glance

select the way in which you receive this
information beforehand. Possible options
include SMS, E-Mail or an automated call.
The area can be determined as either a circle
or a polygon with a maximum of ten corners.
You can specify up to ten areas
simultaneously. Different settings are
possible for each area.
USA only: these settings can be called up
under "Owners Online" at http://
www.mbusa.com.
Alternatively, you can trigger an MB Info call
and inform the customer service
representative that you wish to activate geo
fencing.
Currently inactive areas can be activated by
SMS.
Triggering the vehicle alarm With this function, you can trigger the
vehicle's panic alarm via SMS. An alarm
sounds and the exterior lighting flashes.
Depending on the setting, the panic alarm
lasts five or ten seconds. Afterwards, the
alarm switches off. Garage door opener
Important safety notes G
WARNING
When you operate or program the garage door
with the integrated garage door opener,
persons in the range of movement of the
garage door can become trapped or struck by
the garage door. There is arisk of injury.
When using the integrated garage door
opener, always make sure that nobody is
within the range of movement of the garage
door. G
WARNING
Combustion engines emit poisonous exhaust
gases such as carbo nmonoxide. Inhaling
these exhaust gases leads to poisoning. There is a risk of fatal injury. Therefore never leave
the engine running in enclosed spaces
without sufficient ventilation.
The HomeLink ®
garage door opener
integrated in the rear-view mirror allows you
to operate up to three different door and gate
systems.
Only operate garage doors using the
integrated garage door opener if:
R they are equipped with a safety stop and
reverse feature, and
R they conform to the current U.S. safety
standards.
When programming a garage door opener,
park vehicle outside the garage.
i Certain garage door drives are
incompatible with the integrated garage
door opener. If you have difficulty
programming the integrated garage door
opener, contact an authorized Mercedes-
Benz Center.
Alternatively, you can call the following
telephone assistance services:
R USA: Mercedes-Benz Customer
Assistance Center at
1-800-FOR-MERCedes
R Canada: Customer Service at
1-800-387-0100
R HomeLink ®
hotline 1-800-355-3515
(free of charge)
More information on HomeLink ®
and/or
compatible products is also available
online at http://www.homelink.com.
i Notes on the declaration of conformity
(Y page 25).
Programming Programming buttons
Observe the "Important safety notes"
(Y
page 275). Features
275Stowage and features Z

Integrated garage door opener in the rear-view
mirror
Garage door remote control 001Fis not part of
the integrated garage door opener.
X The first time before programming, clear
the integrated garage door opener memory
(Y page 278).
X Turn the SmartKey to position 2in the
ignition lock.
X Press and hold one of buttons 0003to0021 on
the integrated garage door opener.
After a short time, indicator lamp 0002lights
up yellow.
i Indicator lamp 0002lights up yellow as soon
as button 0003,0022or0021 is programmed for
the first time. If the selected button has
already been programmed, indicator
lamp 0002will only lightu p yellow after ten
seconds have elapsed.
X Release button 0003,0022or0021. Indicator
lamp 0002flashes yellow.
X Point garage door remote control 001F
towards buttons 0003to0021 on the rear-view
mirror at a distance of 2 to 8 inches (5 to
20 cm).
i The required distance between remote
control 001Fand the integrated garage door
opener depends on the garage door drive
system. Several attempts might be
necessary. You should test every position
for at least 25 seconds before trying
another position. X
Press and hold button 0020on remot econtrol
001F until indicator lamp 0002lights up green.
If indicator lamp 0002lights up green or
flashes, then programming has been
successful.
X Release button 0020on remote control 001Ffor
the garage door drive system.
X If indicator lamp 0002lights up red: repeat
the programming procedure for the
corresponding button on the rear-view
mirror. When doing so, vary the distance
between remote control 001Fand the rear-
view mirror.
i If the indicator lamp flashes green after
successful programming, the garage door
system is using a rolling code. After
programming, you must synchronize the
garage door opener integrated in the rear-
view mirror with the receiver of the garage
door system.
Synchronizing the rolling code
Observe the "Important safety notes"
(Y page 275).
Your vehicle must be within reach of the
garage door or exterior gate drive. Make sure
that neither your vehicle nor any persons/
objects are present within the sweep of the
door or gate.
X Turn the SmartKey to position 2in the
ignition lock.
X Press the program button of the door or
gate drive (see the door or gate drive
operating instructions, e.g. under
"programming of additional remote
controls").
i Usually, you now have 30seconds to
initiate the next step.
X Press previously programmed button 0003,
0022 or0021 of the integrated garage door
opener until the door closes.
The rolling code synchronization is then
complete. 276
FeaturesStowage and features

Notes on programming the remote
control
Canadia nradio frequency laws require a
"break" (or interruption) of the transmission
signals after broadcasting for a few seconds.
Therefore, these signals may no tlast long
enough for the integrated garage door
opener. The signal is no trecognized during
programming. Comparable with Canadian
law, some U.S.g arage door openers also
feature a "break".
Proceed as follows:
R if you live in Canada
R if you have difficulties programming the
garage door opener (regardless of where
you live) when using the programming
steps
X Press and hold one of buttons 0003to0021 on
the integrated garage door opener.
Afte rashort time, indicator lamp 0002lights
up yellow.
X Release the button.
Indicator lamp 0002flashes yellow.
X Press button 0020of garage door remote
control 001Ffor two seconds, then release it
for two seconds.
X Press button 0020againf or two seconds.
X Repeat this sequence on button 0020of
remote control 001Funtil indicator lamp 0002
lights up green.
If indicator lamp 0002turns red, repeat the
process.
X Continue with the other programming
steps (see above).
Problems when programming
If you are experiencing problems
programming the integrated garage door
opener on the rear-view mirror, take note of
the following instructions:
R Check the transmitter frequency of garage
door drive remote control 001F.This can
usually be found on the back of the remote
control. The integrated garage door opener is
compatible with devices that have units
which operate in the frequency range of
280to 433MHz.
R Replace the batteries in garage door
remote control 001F.This increases the
likelihood that garage door remote control
001F will transmit a stronga nd precise signal
to the integrated garage door opene rinthe
rear-view mirror.
R When programming, hold remote control
001F at varying distances and angles from the
button that you are programming. Try
various angles at a distance between 2and
12 inches (5to 30 cm) or at the same angle
but at varying distances.
R If another remote control for the same
garage door drive is available, repeat the
same programming steps with this remote
control. Before performing these steps,
make sure that new batteries have been
installed in garage door drive remote
control 001F.
R Note that some remote controls only
transmit for a limited amount of time (the
indicator lamp on the remote control goes
out). Press button 0020on remote control
001F again before transmission ends.
R Align the antenna cable of the garage door
opener unit. This can improve signal
reception/transmission.
Opening/closing the garage door After it has been programmed, the integrated
garage door opener performs the function of
the garage door system remote control.
Please also read the operating instructions
for the garage door system.
X
Turn the SmartKey to position 2in the
ignition lock.
X Press button 0003,0022or0021 which you have
programmed to operate the garage door.
Garage door system with a fixed code:
indicator lamp 0002lights up green. Features
277Stowage and features Z

Garage door system with a rolling code:
indicator lamp
0002flashes green.
i The transmitte rwill transmit a signal as
long as the button is pressed. The
transmission is halted after a maximum of
ten seconds and indicator lamp 0002lights
up yellow. Press button 0003,0022or0021 again
if necessary.
Clearing the memory X
Turn the SmartKey to position 2in the
ignition lock.
X Press buttons 0003and 0021.
The indicator lamp lights up yellow.
X Press and hold buttons 0003and 0021until the
indicator lamp turns green.
i Make sure that you clear the memory of
the integrated garage door opener before
selling the vehicle. Compass
Calling up the compass The compass displays in which compass
direction the vehicle is currently traveling:
N ,
NE ,
E ,
SE ,
S ,
SW ,
W or
NW .
To receive a correc
tdisplay in rear-view
mirror 0002, the compass must be calibrated
and the magnetic field zone set. Setting the compass X
Determine your position using the following
zone maps. North America zone map
South America zone map278
FeaturesStowage and features