2013 MERCEDES-BENZ C-Class display

Option 2
X
Select Channel List with Artist, Channel List with Artist,
Title
Title and press 00A1to confirm.
The channel list appears and displays the
artists and tracks currently being played. X
Select a channel by turning 0082005B0083the
COMAND controller and press 00A1to
confirm.
Memory functions Channel presets
There are ten presets available.
Storing channels
X
Press 00A1the COMAND controller when the
display/selection window is active.
or
X Select Presets
Presets in the submenu bar by
turning 0082005B0083the COMAND controller and
press 00A1to confirm.
In both cases, the channel presets appear.
The 003Fdot in front of a preset entry indicates that the currently selected
channel is stored under this preset.
X Select a preset by turning 0082005B0083the
COMAND controller and press and hold
00A1 until you hear a tone.
or
X Press and hold a number button, e.g.
008D, until you hear a tone.
The channel is stored under the preset.
Storing channels automatically
This function automatically stores channels
with adequate reception in the preset
memory. Channels stored manually in the
preset memory will be overwritten.
X Option 1: press00A1the COMAND controller
when the display/selection window is
active.
X Select Autostore
Autostore in the presets by turning
0082005B0083 the COMAND controller and press
00A1 to confirm.
X Option 2: selectPresets
Presets in the submenu
bar by sliding 005B0064and turning 0082005B0083the
COMAND controller and press 00A1to
confirm.
X Select Autostore Autostore and press00A1to confirm.
In both cases, COMAND searches for
channels that can be received. You will see
a message to this effect. The available
channels are automatically stored in the
preset positions.
X To cancel storing: selectCancel
Cancel and
press 00A1to confirm.
Selecting a channel from the preset list
X To call up the preset list: select
Presets
Presets by turning 0082005B0083the COMAND
controller and press 00A1to confirm.
The channel preset list appears.
X To set a channel: select a preset by
turning 0082005B0083the COMAND controller and
press 00A1to confirm.
or
X Press a number key, such as 008D.190
Satellite radioAudio

Displaying information
X
Select Info
Infoin the submenu bar by turning
0082005B0083 the COMAND controller and press
00A1 to confirm.
Information on the currently received
program is displayed.
If available, you will see:
R the full channel name
R the artist of the track that is currently being
played
R the track that is currently being played
X To return to the radio display: confirm
Info
Info by pressing 00A1.
X Slide 00A0005Bthe COMAND controller up.
Displaying service information 0043
Provider's phone number (SIRIUS XM) or
Call Service Provider
Call Service Provider
0044 SIRIUS ID of your satellite receiver
The provider's customer service center is
available by phone at any time to answer any general questions or questions on the
versions available.
X
Select Sat Radio
Sat Radio in the submenu bar by
turning 0082005B0083the COMAND controller and
press 00A1to confirm.
X Select Service Service and press 00A1to confirm.
The provider's details appear.
X To return to the SatRadio main display:
slide 009E005B009F the COMAND controller.
Channel list updates When receiving a new channel list, the display
shows the
Updating Channels... Updating Channels...
message.
The station last selected is switched to mute
until the update has been completed.
Satellite radio mode is not available during
this process.
Once the update has been completed, the
satellite radio main menu appears. The
station last selected is played.
Sound settings Information on sound settings (Y
page 28). Audio CD/DVD and MP3 mode
Important safety notes
G
WARNING
COMAND is classified as a Class 1 laser
product. Never open the housing. There is a
risk of damage to the eyes due to exposure to
invisible laser radiation if you open the casing,
or if the casing is faulty or damaged.
COMAND does not contain any parts that can
be serviced by the user. For safety reasons,
all maintenance work must be carried out by
qualified aftersales technicians. Audio CD/DVD and MP3
mode
191Audio Z

i
It may take some time for the disc to be
loaded, depending on the type of disc. If no
disc is inserted for approximately 20
seconds, the display returns to the
magazine menu.
The DVD changer plays the disc if:
R it has been inserted correctly.
R it is a permissible type of disc. 0043
Full magazine tray (eject function is
available)
0044 Empty magazine tray (disc can be
inserted)
X To exit the menu: press the0065eject/
load button again or press the 0041back
button.
or
X Select Back
Back by sliding 005B0064and turning
0082005B0083 the COMAND controller and press
00A1 to confirm.
X To fill empty magazine trays: press the
0065 load/eject button.
The magazine menu appears.
X Select Fill Empty Slots
Fill Empty Slots.
You see the Please Wait... Please Wait... message.
COMAND switches to the next free
magazine tray. You then see the Please
Please
insert disc insert disc message.
i Do not insert a disc into the magazine tray
until you have seen this prompt.
X Insert a disc into the disc slot with the
printed side facing upwards.
You see the Please Wait...
Please Wait... message.
Once the disc is loaded, the DVD changer switches to the next empty tray. You see
the
Please insert disc Please insert disc message.
X Repeat this step until all trays are loaded.
The DVD changer plays the last disc you
loaded if it has been inserted correctly and
it is a permissible type.
X To cancel loading: press the0065eject/
load button again or press the 0041back
button.
i If you cancel loading with the 0041back
button, the system loads and plays the last
CD you inserted.
Ejecting discs from the DVD changer If you remove one disc while playing another
disc, the DVD changer interrupts playback.
Playback continues once the disc has been
ejected.
X
To eject a CD/DVD: press the0065load/
eject button.
The magazine menu appears. The magazine
tray with the current disc is highlighted. 0043
Eject possible
0044 Type of data medium
0087 Disc name (only if stored on the disc)
0085 Current disc Audio CD/DVD and MP3 mode
193Audio Z

X
Select Disc
Disc,Memory Card
Memory Card, Music
Music
Register
Register ,USB Storage
USB Storage orMedia
Media
Interface
Interface and press00A1to confirm.
This switches to the desired audio source.
X Select an audio medium from the media list
(Y page 197).
Example display: audio CD mode 0043
CD cover (if available)
0044 Gracenote data is read, then the elapsed
track time
0087 Track number and track name (if stored
on the disc as CD text or if Gracenote ®
data is available)
0085 Graphic time and track display
0083 Disc type, disc position in the media list
and disc name (if stored on the disc as CD
text or if Gracenote ®
data is available)
0084 Artist (if stored on the disc as CD text or
if Gracenote ®
data is available)
006B CD mode menu Example display: audio DVD mode 0043
Cover (if available)
0044 Track time
0087 Track number
0085 Graphic time and track display
0083 Disc type, disc position in the media list,
disc name (only if stored on the disc)
0084 Audio DVD mode menu
Example display: MP3 mode 0043
Cover (if available)
0044 Track time
0087 Track number and name
0085 Graphic time and track display
0083 Medium type, position of medium in the
media list, current folder
0084 Artist (if available)
006B MP3 mode menu 196
Audio CD/DVD and MP3 modeAudio

Pause function
In audio CD/DVD and MP3 mode X
To pause playback: briefly press the
006C button.
The 0074 symbol appears at the top left in
the status bar.
X To continue playback: briefly press the
006C button again.
The 0074 symbol disappears.
In audio DVD mode only X
To pause playback: switch on audio DVD
mode (Y page 195).
X Select 00D8by sliding 005B0064and turning
0082005B0083 the COMAND controller and press
00A1 to confirm.
The 00D8 display changes to 00D9.
X To continue playback: select00D9and
press 00A1to confirm.
Playback continues from the point where it
was interrupted. The 00D9display changes
to 00D8. Stop function
This function is only available in audio DVD
mode.
X Switch on audio DVD mode (Y page 195).
X To interrupt playback: select00E5by
sliding 005B0064and turning 0082005B0083the COMAND
controller and press 00A1to confirm.
The 00D8 display changes to 00D9. The
00E5 symbol remains highlighted.
X To continue playback: select00D9and
press 00A1to confirm.
Playback continues from the point where it
was interrupted. X
To stop playback: while playback is
interrupted, select 00E5again and press
00A1 to confirm.
or
X Select 00E5and confirm by pressing 00A1
twice in rapid succession.
00D9 is highlighted.
X To restart playback: select00D9and
press 00A1to confirm.
Playback starts at the beginning of the
DVD. Selecting audio CD/DVD/MP3 discs
Selecting via the media list Media list when equipped with a DVD changer
X
In CD/audio DVD and MP3 mode: select
Media Media by sliding 005B0064or turning 0082005B0083the
COMAND controller and press 00A1to
confirm.
The media list appears. The 003Bdot indicates
the current medium being played.
The media list shows the discs currently
available.
View in 0043:
R 004C magazine tray not shown
R 004E magazine tray show Audio CD/DVD and MP3 mode
197Audio Z

X
To change the display: select1...6
1...6
Changer
Changer by turning 0082005B0083the COMAND
controller and press 00A1to confirm.
Depending on the previous setting, the
magazine trays are shown or not shown.
i If a disc cannot be read, an entry appears
next to the corresponding magazine tray. Media list showing all magazine trays
X
Select the data medium by turning 0082005B0083
the COMAND controller and press 00A1to
confirm.
The following tables list the selection options
in the media list for the respective equipment
variants. For DVD changer
Magazine trays, positions 1 to 6: readable
data media are audio CDs, MP3 CDs or MP3
DVDs, audio DVDs and video DVDs. Memory card, position 7
MUSIC REGISTER, position 8
USB storage device, position 9
Media Interface, position 0
Bluetooth
®
audio Equipped with a single DVD drive
DVD drive, position 1: readable data media
are audio CDs, MP3 CDs or MP3 DVDs,
audio DVDs and video DVDs. Memory card, position 2 MUSIC REGISTER, position 3
USB storage device: position 4
Media Interface: position 5
Bluetooth
®
audio: position 6 i
If you select a video DVD, the system
switches to video DVD mode
(Y page 226).
Selecting a track using the number
keypad X
When the display/selection window is
active, press a number key, e.g. 008D.
The medium at the corresponding position
in the media list is loaded and then played. Selecting a track
Selecting by skipping to a track X
To skip forwards or back to a track: turn
0082005B0083 the COMAND controller when the
display/selection window is active.
or
X Press the 0048or0049 button.
The skip forward function skips to the next
track.
The skip back function skips to the
beginning of the current track if the track
has been playing for more than
eight seconds. If the track has been playing
for less than eight seconds, it skips to the
start of the previous track.
If the Random Tracks
Random Tracks orRandom Folder Random Folder
playback option has been selected, the
track order is random. 198
Audio CD/DVD and MP3 modeAudio

Selecting a track using the number
keypad
X
Press the 0056key on the number keypad.
A numerical entry field appears. The
number of positions offered corresponds to
the number of tracks on the CD/DVD. Only
numbers that correspond to a track
number on the CD/DVD can be entered.
X Enter the desired track number using the
number keys.
The track plays after the last possible
number is entered.
i Pressing and holding a number key for
more than two seconds completes the
entry, and the corresponding track is
played.
Selecting a track using music search X
Select Current Tracklist
Current Tracklist ,Folder Folder or a
category and press 00A1to confirm.
Select music via categories (e.g. album,
artist) with the music search function.
If you select a category, COMAND starts a
search for track information if the following
conditions are fulfilled:
R the data carriers are inserted or connected
R the track information from these data
carriers is not yet contained in the
COMAND music database.
COMAND imports track information from the
following data carriers:
R disc (audio CD/DVD/MP3)
R memory card R
MUSIC REGISTER
R USB storage device
The Track information is complete.
Track information is complete.
message appears once the search is
completed. COMAND stores the music data
in its own database. You can now select the
available music data within the desired
category.
You will find further information on searching
for music in the "Music search" section
(Y page 204).
X In CD/audio DVD/MP3 mode, select
Search Search by sliding 005B0064and turning 0082005B0083the
COMAND controller and press 00A1to
confirm.
The category list appears. Example: current track list
X
Select the track by turning 0082005B0083the
COMAND controller and press 00A1to
confirm.
The basic display appears and the track is
played. Fast forwarding/rewinding
X While the display/selection window is
active, slide 009E005B009Fand hold the COMAND
controller until the desired position has
been reached.
or
X Press and hold the 0048or0049 button
until the desired position is reached. Audio CD/DVD and MP3 mode
199Audio Z

Gracenote Media Database
Introduction This function is only available in audio CD
mode. There is a version of
Gracenote® music recognition technology
on the COMAND hard drive. You will
recognize this by the logo which can be seen
in the bottom right-hand corner of certain
audio displays.
Many audio CDs contain CD text. COMAND
uses the information contained therein to
display the artist, album and track name.
If the audio CD does not contain any CD text
information, COMAND can use the
Gracenote ®
Media Database to identify
unknown audio tracks when in audio CD
mode. This is only possible if the relevant
information is saved in the Gracenote Media
Database and if the "Gracenote Media
Database" function is activated.
If this is the case, COMAND will display the
corresponding data such as artist, album and
track name in the relevant displays and lists.
Selecting Gracenote ®
data to be
displayed X
Switch on CD mode (Y page 195).
X Select CD CDby sliding 005B0064and turning 0082005B0083
the COMAND controller and press 00A1to
confirm.
X Select Gracenote Media Database
Gracenote Media Database by
turning 0082005B0083the COMAND controller and
press 00A1to confirm.
A menu appears.
The 003Bdot indicates the current selection
for the display.
If several entries exist for the CD of a
particular artist, you can select which of the
entries should be shown.
If the inserted CD does not contain any
Gracenote® data, the Gracenote Media
Gracenote Media
Database Database menu item is shown in grey and
cannot be selected.
X Select an entry by turning 0082005B0083the
COMAND controller and press 00A1to
confirm.
Switching the Gracenote ®
data display
on/off X
Switch on CD mode (Y page 195).
X Select CD CDby sliding 005B0064and turning 0082005B0083
the COMAND controller and press 00A1to
confirm.
X Select Gracenote Media Database
Gracenote Media Database by
turning 0082005B0083the COMAND controller and
press 00A1to confirm.
X To switch off the display: selectNone
Noneand
press 00A1to confirm.
In the basic display, Track 1 Track 1,Track 2 Track 2 etc.
are shown instead of the Gracenote ®
data,
for example (Y page 196).
X To switch on the display: select an entry
in the menu by turning 0082005B0083the COMAND
controller and press 00A1to confirm. 200
Audio CD/DVD and MP3 modeAudio