2013 MAZDA MODEL MAZDASPEED 3 key

[x] Cancel search: key

Page 102 of 611

MAZDA MODEL MAZDASPEED 3 2013  Owners Manual (in English) qAdvanced Key Left-in-vehicle
Warning Beep
If an advanced key is left in the vehicle
cabin and all the doors are locked using a
separate advanced key, a beep sound is
heard for about 10 seconds to rem

Page 103 of 611

MAZDA MODEL MAZDASPEED 3 2013  Owners Manual (in English) When Warning Indicator/Beep is Activated
Under the following conditions, warning beeps are heard and a warning/indicator light in
the instrument cluster illuminates to notify the driver of improper op

Page 104 of 611

MAZDA MODEL MAZDASPEED 3 2013  Owners Manual (in English) Keys
WARNING
Do not leave the key in your vehicle
with children and keep them in a place
where your children will not find or
play with them:
Leaving children in a vehicle with the
key is dangerous. T

Page 105 of 611

MAZDA MODEL MAZDASPEED 3 2013  Owners Manual (in English) Key extend/retract method (Retractable
type key)
To extend the key, press the release
button.
To retract the key, rotate it into the holder
while pressing the release button.
Keyless Entry Systemí
Th

Page 106 of 611

MAZDA MODEL MAZDASPEED 3 2013  Owners Manual (in English) qTransmitter
5 door
Lock button
Unlock button
Panic button
Operation 
indicator light
4 door
Lock button
Unlock button
Trunk buttonPanic button
Operation 
indicator light
The operation indicator light

Page 108 of 611

MAZDA MODEL MAZDASPEED 3 2013  Owners Manual (in English) Declaration of Conformity
Keyless entry system 
Knowing Your Mazda
Doors and Locks
3-29

Page 109 of 611

MAZDA MODEL MAZDASPEED 3 2013  Owners Manual (in English) qTransmitter Maintenance
If the buttons on the transmitter are
inoperable and the operation indicator
light does not flash, the battery may be
dead.
Replace with a new battery before the
transmitter b

Page 110 of 611

MAZDA MODEL MAZDASPEED 3 2013  Owners Manual (in English) 5. Put in the new battery (CR1620 or
equivalent) with the positive pole (
)
facing down.
6. Align the front and back covers and
snap the transmitter shut.
7. Align the key with the transmitter as
show