2013 MAZDA MODEL CX-9 belt

34
to Program the Driver’s Seat Position and Outside Mirror Angle
1 Park the vehicle.
2 Adjust the seat to the desired position using the slide/tilt and
recline switches.
3 Adjust the outside mirror angles.
4
Push the memory seat S et button followed by one of the programming
buttons (1-3) until a beep is heard. Programming is now complete.
Program the remaining two buttons as desired.
t o Program the Driver’s Seat Position and Outside Mirror Angle
with Advanced key/Retractable type key
1 Adjust the seat and outside mirror angle to the desired positions.
2 Switch the ignition off.
3
Push the S et button next to the programming buttons and then the
unlock button on the advanced key/retractable type key you want to
program within about 5 seconds. A beep sound is heard when the
operation is completed.
n O te :
When the driver's door is unlocked using a programmed advanced key/
retractable type key, the seat and outside mirror angles will move to their programmed
positions if the driver's door is opened within about 40 seconds. A beep sound is
heard after the adjustment to the programmed positions is completed.
t o Move the Seat and Outside Mirrors to a Programmed Position
1 Shift the selector lever to the P position.
2 Push the programming button (1-3) that you selected when
programming your seat position.
Seats
e Le C tROni CALLY OP eRA teD S eAt W/M eMORY
Slide/ tilt Switch
Seat can be moved back
and forth, raised, lowered,
or tilted with this control.
Lumbar Switch
Push forward or backward to increase or
decrease lumbar support.
Recline Switch
Push forward or backward

to adjust seatback angle.
Memor y Seat Switch 1 Open liftgate.
2 Lower head restraints.
3
Pull each strap on the rear of
the seat while pushing the left
and right seat forward to lay flat.
t o Return to the Original Position

Pull the strap to return the seatback to the original position.
S PL it F OLD ing t hiRD -ROW S eAt
To create a flat luggage compartment
space, fold the seatbacks forward.
t hird-row seat
access lever
Seatback folding
lever
Straps
nO te : The third row seats are equipped with foldable head
restraints. To fold the head restraint, pull the strap on the back
of the head restraint and fold the head restraint downward. To
return the head restraint to its upright position, lift it upward.
Strap
Se CO nD R OW Se AtB ACK Re CLine
To recline the seatback, lean forward slightly while folding lever. Then lean
back to the desired position and release the lever.
F OLD ing the Se COnD -R OW Se AtS
1 Unfasten the lap portion of the center-rear seat belt.
2 Slide seat all the way back toward rear of vehicle.
3 Lower head restraints.
4 Pull the seatback folding lever and fold the seatback forward.
thi RD -ROW Se At A CCeSS
• Pull the third-row seat access lever on the
side of the second-row seatback to fold
and slide the seat forward to access
third-row seating.
•
Return the second-row seatback to the
normal upright position by pulling up on
the seatback until it locks into place.
•
Slide the second-row seat forward or back
for proper legroom using the lever under
the front of the seat. www.MazdaUSA.com
1284179_13a_Mazda_CX-9_SSG_101512.indd 4-510/15/12 3:03 PM

Driver’s View (shown with optional
56
Navigation System)
1 This indicator light illuminates to remind you that the front passenger’s front/side airbags and seat
belt pretensioner will not deploy during a collision. The reason for this is that the weight in the seat is
less than approximately 66 lbs. Always wear your seat belt and secure children in the rear seats in
appropriate child restraints. See the Owner’s Manual for important information on this safety feature.
B LU etOOth®
hA nDS -FRee
( P P. 1 9 - 2 0 )/
AUDi O
( P P. 17-1 8 )
BACKUP
S en SOR
SYS teM
( P. 14 )
heADLight
Le Ve Ling
( P. 9 )
P OW eR
L i Ft g At e
SW itCh
( P. 14 )
tRACti On
CO ntROL
SYS teM
( tCS)BL inD SPO t
MOnit ORing
(BS M)
( P. 1 3 )
nAV igAti On
S YS teM
SD CARD

( P. 2 3 )
in FORMA tiOn
D iS P L AY
(PP. 15, 25)
C LiM A t e
CO ntROL

( P P. 1 5 -1 6 )
L ighting /
t URn Sign ALS
( P. 9 )
hOOD
R eLe AS e ACCe
SSORY
SOCK et
ti
Lt/ te Le SCOP ing
Stee Ring W heeL
Le Ve R (behind
steering wheel)
hA zARD
WARning
S e At
WARM eRS
( P P. 1 5 -1 6 )
P ASS enge R
A iRBA g OFF
in DiCA tOR
1
www.MazdaUSA.com
CLOCK
S etting
nAV igAti On/
AUDi O
(PP. 17-18, 23-24)
Wi Pe R /
WAS heR
( P. 1 0 )
C RU iS e CO ntROL /
nAV igAti On V OiC e
Re CO gniti On
1284179_13a_Mazda_CX-9_SSG_101512.indd 6-710/15/12 3:03 PM

Instrument Cluster
78
Low Fuel Level

Ke
Y Warning Light (Re D) Advanced key not detected
or transmitter battery is dead.

K
eY indicator L ight (gR een ) On: Advanced key detected; engine
is ready to start.
Flashing: Advanced key battery is low.
Check Fuel Cap

ABS (Antilock Brake
System) Malfunction

Lights On (
exterior)

t
ire Pressure
Monitoring System
( t PMS
) Warning Light On/ Warning Beep: Low tire
pressure in one or more tires.
Flashing: TPMS Malfunction
tCS
OFF

t
CS OFF
( t raction Control System)

Charging System Malfunction

Powertra
in Malfunction/
Reduced Power
BSM OFF

BSM OFF

(Blind Spot Monitoring)

Check e
ngine Light

Brake Warning Light
Parking brake on/low brake
fluid/malfunction

t
urn Signals/ hazard
Warning i ndicator Lights

Automatic t
ransmission
Malfunction

Shift Position i
ndicator Light

h
eadlight h igh Beams On

t
raction Control System
( t CS)/Dynamic Stability
Control (DSC)/Roll
Stability Control (RSC)
On: TCS/DSC malfunction
Flashing: TCS/DSC operating
Air Bag/Front Seat Belt
Pretensioner System
Malfunction
Low e
ngine Oil Pressure

Security i
ndicator Light

Door/Liftgate Ajar
4WD

4WD
On: System is not normal; dealer
inspection required.
Flashing: Differential oil temperature
is high; dealer inspection required.
Seat Belt

Unbuckled/Malfunction

Cruise Main indicator

Light On (A MBe R)/
Cruise Set indicator
Light On (
gR een)

Low Washer Fluid Level
tAC
hO M e t e R
F
U eL gAU ge SPeeDOM eteRtRiP M ete R
S eLeCt OR2in StRUM ent
CLUSte R D iMM eR1engine COOLA nt
teMP eRAtUR e g AUgeODOM eteR/
tR iP M ete RShiFt Le VeR
P OS itiOn in DiCA tOR
gLOSSARY OF W ARning A nD in DiCA tOR L ight S
nOte : See Owner’s Manual for more details and explanations.
nOte : Low ambient temperature and/or high altitude causes tire pressures to drop
and may turn the TPMS warning light on. If the warning light comes on, check the tire
pressure and fill the tires as soon as possible, preferably before moving the vehicle and
warming up the tires. Tire pressure should be checked when the tires are cold.1 If the instrument cluster and other dashboard illuminations do not dim when turning on the headlights,
push the Instrument Cluster Dimmer knob.
2 • Push to toggle between trip meter A & B.
• When a trip meter is selected, push and hold to reset to zero.
The instrument cluster has a dimmer function that
can be cancelled to make the illumination brighter
during the day when the headlights are on. If
the illumination is too dim during the day,
press the knob, or if the illumination does
not dim when turning on the headlights
at night, press the knob.
When dimmed, rotate the
knob to adjust the brightness
of the illumination.
www.MazdaUSA.com
1284179_13a_Mazda_CX-9_SSG_101512.indd 8-910/15/12 3:03 PM