2013 MAZDA MODEL 5 belt

[x] Cancel search: belt

Page 51 of 456

MAZDA MODEL 5 2013  Owners Manual Black plate (51,1)
qIf You Must Use the Front Seat
for Children
If you cannot put all children in the rear
seats, at least put the smallest children in
the rear and be sure the largest child up
front

Page 53 of 456

MAZDA MODEL 5 2013  Owners Manual Black plate (53,1)
3. Place the child-restraint system on theseat without putting your weight on the
seat and fasten the seat belt. See the
manufacturers instructions on the
child-restraint system fo

Page 54 of 456

MAZDA MODEL 5 2013  Owners Manual Black plate (54,1)
WARNING
Do not seat a child in a child-restraint
system on the front passenger seat if
the front passenger air bag
deactivation indicator light does not
illuminate (With Driver and

Page 55 of 456

MAZDA MODEL 5 2013  Owners Manual Black plate (55,1)
LATCH Child-Restraint Systems
Your Mazda is equipped with LATCH lower anchors for attachment of specially designed
LATCH child-restraint systems the second-row seats. Both anchors m

Page 58 of 456

MAZDA MODEL 5 2013  Owners Manual Black plate (58,1)
Supplemental Restraint System (SRS) Precautions
The front and side supplemental restraint systems (SRS) include 6 air bags.Please verify
the air bags equipped on your vehicle by loc

Page 59 of 456

MAZDA MODEL 5 2013  Owners Manual Black plate (59,1)
If your vehicle is also equipped with a driver and front passenger occupant
classification system, refer to the Driver and Front Passenger Occupant Classification
System (page 2-59)

Page 60 of 456

MAZDA MODEL 5 2013  Owners Manual Black plate (60,1)
Never use a rear-facing child-restraint system in the front seat with an air bag that
could deploy:Rear-facing child-restraint systems on the front seat are particularly dangerous e

Page 63 of 456

MAZDA MODEL 5 2013  Owners Manual Black plate (63,1)
Supplemental Restraint System Components
Driver/Front passenger inflators and air bags
Crash sensor, and diagnostic module (SAS unit)
Front seat belt pretensioner and load limiting