Page 456 of 628

4427-3. Do-it-yourself maintenance
IS300h_EE(OM53B95E)
Engine oil consumption
A certain amount of engine oil will be consumed while driving. In the following
situations, oil consumption may increase, and engine oil may need to be refilled
in between oil maintenance intervals.
When the engine is new, for example directly after purchasing the vehicle or
after replacing the engine
If low quality oil or oil of an inappropriate viscosity is used
When driving at high engine speeds or with a heavy load, when towing, or
when driving while accelerating or decelerating frequently
When leaving the engine idling for a long time, or when driving frequently
through heavy traffic
After changing the engine oil (if equipped)
The engine oil maintenance data should be reset. Perform the following proce-
dures:
While the hybrid system is operating, switch the multi-information display to
the “Settings” screen. (P. 118)
Select “Maintenance System” on the “Settings” screen.
Select “Yes” on the “Maintenance System” screen.
A message will be displayed when the
reset procedure has been completed.
1
2
3
Page 457 of 628

4437-3. Do-it-yourself maintenance
7
Maintenance and care
IS300h_EE(OM53B95E)
CAUTION
Used engine oil
Used engine oil contains potentially harmful contaminants which may cause
skin disorders such as inflammation and skin cancer, so care should be taken
to avoid prolonged and repeated contact. To remove used engine oil from
your skin, wash thoroughly with soap and water.
Dispose of used oil and filters only in a safe and acceptable manner. Do not
dispose of used oil and filters in household trash, in sewers or onto the
ground.
Call any authorized Lexus dealer or repairer, or another duly qualified and
equipped professional, service station or auto parts store for information con-
cerning recycling or disposal.
Do not leave used engine oil within the reach of children.
NOTICE
To prevent serious engine damage
Check the oil level on a regular basis.
When replacing the engine oil
Be careful not to spill engine oil on the vehicle components.
Avoid overfilling, or the engine could be damaged.
Check the oil level on the dipstick every time you refill the vehicle.
Be sure the engine oil filler cap is properly tightened.
Page 534 of 628

5208-2. Steps to take in an emergency
IS300h_EE(OM53B95E)
(If equipped)
Indicates a malfunction in the PCS (Pre-Crash
Safety system)
A buzzer also sounds.
Have the vehicle inspected by any authorized
Lexus dealer or repairer, or another duly quali-
fied and equipped professional.
(If equipped)
Indicates a malfunction in the BSM (Blind Spot
Monitor) system
A buzzer also sounds.
Have the vehicle inspected by any authorized
Lexus dealer or repairer, or another duly quali-
fied and equipped professional.
Indicates abnormal engine oil pressure
A buzzer also sounds.
Immediately stop the vehicle in a safe place and
contact any authorized Lexus dealer or repairer,
or another duly qualified and equipped profes-
sional.
Indicates a malfunction in:
• The regenerative brake system; or
• The electronically controlled brake system
A buzzer also sounds.
Immediately stop the vehicle in a safe place and
contact any authorized Lexus dealer or repairer,
or another duly qualified and equipped profes-
sional.
Indicates that the Pop Up Hood system has operated
A buzzer also sounds.
Have the vehicle inspected by any authorized
Lexus dealer or repairer, or another duly quali-
fied and equipped professional.
Indicates a malfunction in the Pop Up Hood system
A buzzer also sounds.
Have the vehicle inspected by any authorized
Lexus dealer or repairer, or another duly quali-
fied and equipped professional.
Indicates that the hybrid system was stopped while
driving
A buzzer also sounds.
Operate the steering wheel with more force than
usual.
Warning messageDetails/Actions
(Flashes)
Page 535 of 628

5218-2. Steps to take in an emergency
8
When trouble arises
IS300h_EE(OM53B95E)
Indicates that the power switch is turned off or
turned to ACCESSORY mode and the driver’s door
is opened while the lights are turned on
A buzzer also sounds.
Turn the lights off.
(If equipped)
Indicates that the moon roof is not fully closed
(with the power switch off, and the driver’s door
open)
A buzzer also sounds.
Close the moon roof.
Indicates that the windows are not fully closed
(with the power switch off, and the driver’s door
open)
A buzzer also sounds.
Close all the windows.
(If equipped)
Indicates that the windows and the moon roof are
not fully closed (with the power switch off, and the
driver’s door open)
A buzzer also sounds.
Close all the windows and the moon roof.
Indicates a malfunction in the brake override sys-
tem
A buzzer also sounds.
Have the vehicle inspected by any authorized
Lexus dealer or repairer, or another duly quali-
fied and equipped professional.
Indicates that engine oil level is low
A buzzer also sounds.
Check the level of engine oil, and add if neces-
sary.
Indicates that the hybrid system has overheated
This message may be displayed when driving
under severe operating conditions. (For example,
when driving up a long steep hill.)
A buzzer also sounds.
Stop and check. (P. 556)
Warning messageDetails/Actions
(Flashes)
(Flashes)
(Flashes)
(Flashes)
Page 539 of 628

5258-2. Steps to take in an emergency
8
When trouble arises
IS300h_EE(OM53B95E)
Warning messages
The warning message illustrations used are intended as examples, and may differ
from the image that is actually displayed on the multi-information display.
Warning message in radar cruise mode (if equipped)
In the following situations, the warning message may not be displayed even if
vehicle-to-vehicle distance decreases:
When your vehicle and the vehicle ahead are traveling at the same speed or the
vehicle ahead is traveling more quickly than your vehicle
When the vehicle ahead is traveling at a very low speed
Immediately after cruise control speed is set
At the instant the accelerator pedal is depressed
The LDA (Lane Departure Alert) lane departure warning function (if equipped)
In the following situations, the warning message will not be displayed even if a
lane line is crossed.
When the vehicle speed deviates from the operating range of the LDA system
functions
When the lane lines cannot be recognized
After changing the engine oil (if equipped)
Make sure to reset the oil change system. (P. 442)
Warning buzzer
P. 512
Page 580 of 628
![Lexus IS300h 2013 Owners Manual 565
9 9-1. Specifications
Vehicle specifications
IS300h_EE(OM53B95E)
Oil capacity (Drain and refill [Reference*])
*: The engine oil capacity is a reference quantity to be used when changing the
eng Lexus IS300h 2013 Owners Manual 565
9 9-1. Specifications
Vehicle specifications
IS300h_EE(OM53B95E)
Oil capacity (Drain and refill [Reference*])
*: The engine oil capacity is a reference quantity to be used when changing the
eng](/manual-img/36/30037/w960_30037-579.png)
565
9 9-1. Specifications
Vehicle specifications
IS300h_EE(OM53B95E)
Oil capacity (Drain and refill [Reference*])
*: The engine oil capacity is a reference quantity to be used when changing the
engine oil. Warm up the engine and turn off the hybrid system, wait more than
5 minutes, and check the oil level on the dipstick.
Engine oil selection
“Toyota Genuine Motor Oil” is used in your Lexus vehicle. Lexus rec-
ommends the use of approved “Toyota Genuine Motor Oil”. Another
motor oil of matching quality can also be used.
Oil grade:
0W-20, 5W-20, 5W-30 and 10W-30:
API grade SL “Energy-Conserving”, SM “Energy-Conserving” or SN
“Resource-Conserving”; or ILSAC multigrade engine oil
15W-40 and 20W-50:
API grade SL, SM or SN multigrade engine oil
Recommended viscosity (SAE):
SAE 0W-20 is filled into your
Lexus vehicle at manufacturing,
and the best choice for good fuel
economy and good starting in
cold weather.
If SAE 0W-20 oil is not avail-
able, SAE 5W-30 oil may be
used. However, it should be
replaced with SAE 0W-20 at the
next oil change.
If you use SAE 10W-30 or a
higher viscosity engine oil in
extremely low temperatures, the
engine may become difficult to
start, so SAE 0W-20, 5W-20 or
5W-30 engine oil is recom-
mended.
Lubrication system
With filter4.5 L (4.8 qt., 4.0 Imp. qt.)
Without filter4.1 L (4.3. qt., 3.6 Imp. qt.)
Temperature range anticipated
before next oil change.Preferred
Page 581 of 628

5669-1. Specifications
IS300h_EE(OM53B95E)
Oil viscosity (0W-20 is explained here as an example):
• The 0W in 0W-20 indicates the characteristic of the oil which allows
cold startability. Oils with a lower value before the W allow for eas-
ier starting of the engine in cold weather.
• The 20 in 0W-20 indicates the viscosity characteristic of the oil
when the oil is at high temperature. An oil with a higher viscosity
(one with a higher value) may be better suited if the vehicle is oper-
ated at high speeds, or under extreme load conditions.
How to read oil container labels:
Either or both API registered marks are added to some oil containers to
help you select the oil you should use.
API Service Symbol
Top portion: “API SERVICE SN”
means the oil quality designation
by American Petroleum Institute
(API).
Center portion: “SAE 0W-20”
means the SAE viscosity grade.
Lower portion: “Resource-
Conserving” means that the oil
has fuel-saving and environmen-
tal protection capabilities.
ILSAC Certification Mark
The International Lubricant Specification Advisory Committee (ILSAC)
Certification Mark is displayed on the front of the container.
1
2
Page 613 of 628

597Alphabetical index
IS300h_EE(OM53B95E)
If you have a flat tire ....531, 545
If you think something
is wrong ..............................506
If your vehicle becomes stuck ....
560
If your vehicle has to be
stopped in an emergency ....499
If your vehicle needs to
be towed .............................500
If your vehicle overheats ......556
Emergency brake signal ............294
Emergency flashers ...................498
Emergency tire puncture
repair kit ..................................531
Energy monitor..........................122
Engine .......................................564
Accessory mode....................210
Compartment ........................439
Engine switch .......................209
Hood .....................................437
How to start the hybrid
system.................................209
Identification number ...........563
Ignition switch
(power switch)....................209
Overheating ..........................556
Power switch ........................209Engine coolant .......................... 444
Capacity ............................... 567
Checking .............................. 444
Preparing and checking
before winter ..................... 311
Engine coolant temperature
gauge ...................................... 110
Engine oil ................................. 440
Capacity ............................... 565
Checking .............................. 440
Preparing and checking
before winter ..................... 311
Engine switch ........................... 209
EPS (Electric Power Steering) . 293
Function ............................... 293
Warning light ....................... 508
EV drive mode.......................... 214
EV indicator ............................. 118