14
Engine (ignition) Switch
■Starting the engine
Make sure the parking brake is engaged and the
shift lever is in P.
Depress the brake pedal.The “ENGINE START STOP” switch indi-
cator light turns green.
Press the “ENGINE START STOP” switch.
■ Stopping the engine
Engage the parking brake and shift the shift lever to P.
Press the “ENGINE START STOP” switch.
■Changing power modes
To change power modes without turning on the engine, press the “ENGINE START STOP”
switch without depressing the brake pedal. The modes can be changed in the following
order:
With the electronic key on your person, the engine can be started by simply pressing the
“ENGINE START STOP” switch, while depressing the brake pedal.
(The mechanical key cannot be used to start the engine.)
ACCESSORY mode IGNITION ON mode
(Indicator light: amber)
OFF
(Indicator light: off)
What to do if ...
77
List of Warning/Indicator Lights
Stop the vehicle immediately. Continuing to drive the vehicle may be dangerous.
(U.S.A.)
(Canada)Brake system warning light
Stop the vehicle immediately.
Charging system warning light
Have the vehicle inspected immediately.
(U.S.A.)
(Canada)Malfunction
indicator lamp
Electric power steering
system warning light
(Blinking and
then continu-
ously on)Tire pressure warning light
SRS warning light
(U.S.A.)
(Canada)ABS warning light
(Comes on)
Slip indicator
Have the malfunction repaired immediately.
Open door warning light(On the
center panel)
Front passenger’s seat belt
reminder light
Low fuel level warning light(Illuminates
without blink- ing)Tire pressure warning light*1
(On the
instrument cluster)
Driver’s seat belt
reminder lightMaster warning light
For further information, re fer to the Owner's Manual.
