2013 Lexus GS450h mirror

3
GS450h_QG_U (OM30D12U)
OverviewInstrument Panel
Windshield wiper and washer switch P.35
Multi-information display P.30
Headlight switch Turn signal lever
Fog light switch
∗*
P.33
P.27
Inside lock buttons P.88
Trunk opener P.92
Hood lock release lever*
Driving position memoryswitches
P.19
See P.6
See P.5
Window lock switch P.89
Outside rear view mirror switches
*
Power window switches
P.89
Door lock switches P.88
Pre-collision braking off switch∗*
Tire pressure warning reset switch P.51
AFS OFF switch∗ P.34
Illust TOC_U.fm Page 3 Monday, January 30, 2012 1:18 PM

19
GS450h_QG_U (OM30D12U)
Driving Position Memory
■Entering a position to memory
Adjust the driver’s seat, steering wheel, and outside rear view mirrors to the desired
positions. (When memorizing the front pass enger’s seat, adjust the front passenger’s
seat to the desired positions.)
While pressing the “SET” button, or within 3
seconds after the “SET” button is pressed,
press button “1”, “2” or “3” until the signal
beeps.
If the selected button has already been pre-
set, the previously recorded position will be
overwritten.
■Recalling the memorized position
Press button “1”, “2” or “3” to recall the
desired position.
■Linking driving position memory with door unlock operation (driver’s side
only)
While pressing the button to recall the posi-
tion, press the driver’s door lock switch
(either lock or unlock) until the signal
beeps.
The driving position is recalled when the
driver’s door is unlocked using the entry
function or wireless remote control and the
driver’s door is opened.
Your preferred driving position (the position of the driver’s seat, steering wheel and out-
side rear view mirrors) can be memorized and recalled by pressing a button.
The same buttons are found on the front passenger’s side, allowing the position of the
front passenger’s seat to be memorized (if equipped).
1
2
GS450h_QG_U.book Page 19 Friday, January 20, 2012 5:54 PM

45
GS450h_QG_U (OM30D12U)
BSM (Blind Spot Monitor) (if equipped)
BSM main switch
Pressing the switch turns the system on or off. When the switch is set to on, the switch’s
indicator illuminates.
Outside rear view mirror indicator
When a vehicle is detected in the blind spot, the outside rear view mirror indicator on
that side illuminates. If the turn signal leve r is operated when a vehicle is in the blind
spot, the outside rear view mirror indicator flashes.
The Blind Spot Monitor is a system that assists the driver to confirm safety when chang-
ing lanes.
1
2
GS450h_QG_U.book Page 45 Friday, January 20, 2012 5:54 PM

73
GS450h_QG_U (OM30D12U)
Front Air Conditioning System
Without rear air conditioning system
With rear air conditioning system
Outside temperature
Passenger’s side temperature control
Passenger’s side temperature display
Front seat air outlet selector
Windshield wiper de-icer
Micro dust and pollen filter
Outside air or recirculated mode
Rear window and outside rear view
mirror defoggers
S-FLOW mode
Off
Automatic mode
Driver’s side temperature displayDriver’s side temperature control
Windshield defogger
DUAL mode
Cooling and dehumidification func-
tion on/off
Fan speed control
Air flows to the feet and the wind-
shield defogger operates
Rear air conditioning operation
screen
Passenger’s side air outlet selector
3-ZONE mode
Driver’s side air outlet selector1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
GS450h_QG_U.book Page 73 Friday, January 20, 2012 5:54 PM