2013 Lexus GS300h warning lights

103
2Instrument cluster
GS450h_300h_OM_OM30D53E_(EE)2. Instrument cluster
Warning lights
and indicators.................. 104
Gauges and meters ............ 109
Multi-information display..114
Head-up display ................ 122
Energy monitor/
consumption screen ........ 130

1042. Instrument cluster
GS450h_300h_OM_OM30D53E_(EE)
Warning lights and indicators
Instrument cluster
The units used on the speedometer may differ depending on the target
region.
Center panel
The warning lights and indicators on the instrument cluster, center
panel and outside rear view mirrors inform the driver of the status
of the vehicle’s various systems.
For the purpose of explanation, the following illustration displays
all warning lights and indicators illuminated.

1052. Instrument cluster
2
Instrument cluster
GS450h_300h_OM_OM30D53E_(EE)
Outside rear view mirrors (vehicles with BSM)
Warning lights inform the driver of malfunctions in the indicated
vehicle’s systems.
Warning lights
*1Brake system warning
light
(P. 830)*1, 2
(if
equipped)
“PCS” warning light
(P. 832)
*1Charging system warn-
ing
light (P. 8 3 1 )*1Slip indicator
(P. 832)
*1
Malfunction indicator
lamp (P. 831)
*1, 2
(if
equipped)
“AFS OFF” indicator
(P. 832)
*1
SRS warning light
(P. 831)
*1, 2
(if
equipped)
Brake hold operated
indicator (P. 832)
*1ABS warning light
(P. 831)*2Parking brake indicator
(P. 832)
*1Electric power steering
system warning light
(P. 832)*1Brake system warning
light (P. 8 3 2 )

1062. Instrument cluster
GS450h_300h_OM_OM30D53E_(EE)
*1: These lights turn on when the power switch is turned to ON mode to indi-
cate that a system check is being performed. They will turn off after the
hybrid system is on, or after a few seconds. There may be a malfunction in
a system if the lights do not come on, or turn off. Have the vehicle
inspected by any authorized Lexus dealer or repairer, or another duly qual-
ified and equipped professional.
*2: The light flashes to indicate a malfunction.
The indicators inform the driver of the operating state of the vehi-
cle’s various systems.
Open door warning light
(P. 833)*1Master warning light
(P. 833)
Low fuel level warning
light (P. 8 3 3 )
*1
(if
equipped)
Tire pressure warning
light
(P. 834)
Seat belt reminder light
(P. 833)
Indicators
Turn signal indicator
(P. 264)
(if
equipped)
Automatic High Beam
indicator (P. 277)
Tail light indicator
(P. 272)
(if
equipped)
Front fog light indicator
(P. 283)
Headlight high beam
indicator (P. 272)Rear fog light indicator
(P. 283)

1082. Instrument cluster
GS450h_300h_OM_OM30D53E_(EE)
*1: These lights turn on when the power switch is turned to ON mode to indi-
cate that a system check is being performed. They will turn off after the
hybrid system is on, or after a few seconds. There may be a malfunction in
a system if the lights do not come on, or turn off. Have the vehicle
inspected by any authorized Lexus dealer or repairer, or another duly qual-
ified and equipped professional.
*2: The light flashes to indicate that the system is operating.
*3: The light comes on when the system is turned off. The light flashes faster
than usual to indicate that the system is operating.
*4: In order to confirm operation, the BSM outside rear view mirror indicators
illuminate in the following situations:
• When the power switch is turned to ON mode while the BSM main
switch is set to ON.
• When the BSM main switch is set to ON while the power switch is in
ON mode.
If the system is functioning correctly, the BSM outside rear view mirror
indicators will turn off after a few seconds.
If the BSM outside rear view mirror indicators do not illuminate or do not
turn off, there may be a malfunction with the system.
If this occurs, have the vehicle inspected by any authorized Lexus dealer
or repairer, or another duly qualified and equipped professional.
CAUTION
If a safety system warning light does not come on
Should a safety system light such as the ABS and SRS warning light not
come on when you start the hybrid system, this could mean that these sys-
tems are not available to help protect you in an accident, which could result
in death or serious injury. Have the vehicle inspected by any authorized
Lexus dealer or repairer, or another duly qualified and equipped profes-
sional immediately if this occurs.

271
4 4-2. Driving procedures
Driving
GS450h_300h_OM_OM30D53E_(EE)
When there is a malfunction in the system
Warning lights and/or warning message will turn on or flash. (P. 830, 838)
Depending on the condition, the parking brake indicator light may flash.
Usage in winter time
P. 4 3 4
NOTICE
When parking the vehicle
Before you leave the vehicle, set the parking brake, shift the shift lever to P
and make sure that the vehicle does not move.
When the system malfunctions
Stop the vehicle in a safe place and check the warning messages.
When the parking brake cannot be released due to a malfunction
Use the parking brake release tool to manually release the parking brake.
(P. 905)
Driving the vehicle with the parking brake set will lead to brake compo-
nents overheating, which may affect braking performance and increase
brake wear.

2744-2. Driving procedures
GS450h_300h_OM_OM30D53E_(EE)
When the parking brake is set automatically while the system is holding the
brakes
The parking brake will not be released automatically. Release the parking
brake by operating the parking brake switch, making sure that the parking
brake indicator light goes off. (P. 269)
When there is a malfunction in the system
Warning lights and/or warning messages will turn on or flash. (P. 832, 843)
CAUTION
When the vehicle is on a steep incline
When using the brake hold system on a steep incline exercise caution. The
brake hold function may not hold the vehicle in such a situation.
When stopped on a slippery road
The system cannot stop the vehicle when the gripping ability of the tires
has been exceeded. Do not use the system when stopped on a slippery road.
NOTICE
When parking the vehicle
The brake hold system is not designed for use when parking the vehicle for
a long period of time. Turning the power switch off while the system is
holding the brake may release the brake, which would cause the vehicle to
move. When operating the power switch, depress the brake pedal, set the
parking brake and shift the shift lever to P.

3444-5. Using the driving support system
GS450h_300h_OM_OM30D53E_(EE)
After the vehicle has been parked in the sun
The LKA system functions may not be available and a warning message
(P. 854) will be displayed for a while after driving has started. In such
cases, turn the LKA system off and turn it on again after normal temperature
returns. When the temperature in the cabin decreases and the temperature
around the camera sensor (P. 338) becomes suitable for its operation, the
functions will begin to operate.
If there are lane markers on only one side of the vehicle
The lane keeping assist function will not operate. Also, the lane departure
warning will not operate for the side on which lane markers could not be rec-
ognized.
Conditions in which the function may not operate correctly
In the following conditions, the LKA system functions may not operate, or it
may not be possible to ensure adequate performance. Also, the camera sensor
may be unable to recognize lane lines causing the lane departure warning
function to operate incorrectly, or the lane keeping assist function may not
operate properly. However, this does not indicate a malfunction.
When driving through an area with no lane markers, such as a tollbooth, a
crossing or before a ticket checkpoint
When driving on a sharp curve
When lanes are extremely narrow or extremely wide
When the vehicle leans to one side an unusual amount due to a heavy load
or improper tire inflation pressure
When the following distance between your vehicle and the vehicle ahead is
extremely short
When the lane markers are yellow (These may be more difficult for the sys-
tem to recognize compared to white markers.)
When the lane markers are broken, “Raised pavement marker” or stones
When lane markers are obscured or partially obscured by sand, dirt, etc.
When there are shadows on the road running parallel with lane markers, or
if a shadow covers the lane markers
When driving on a particularly bright road surface, such as concrete
When driving on a road surface that is bright due to reflected light
When driving in a location where the light level changes rapidly, such as the
entrance to or exit from a tunnel
When sunlight or the headlights of oncoming vehicles are shining directly
into the camera lens