2013 Lexus CT200h light

5557-3. Do-it-yourself maintenance
CT200h_OM_OM76102E_(EE)
7
Maintenance and care
Install the cover of the back
end of the mirror, installing the
lower side and the upper side
in that order.
When installing the lower side of
the cover, insert the side turn sig-
nal light pin into the hole in the
cover.
Secure the cover with screws
and reconnect the connectors
back together.
Secure the cords by returning
them to the hooks as they were.
Align the tabs, and secure the
mirror by pushing in each
diagonally-opposite pair of
tabs in order.
Make sure to insert the tabs in
order as shown in the illustration,
and push them in until a click is
heard.
If you do not hear the click, do
not force the tabs in. Instead,
remove the mirror and check that
the tabs are aligned.
10
11
12

5567-3. Do-it-yourself maintenance
CT200h_OM_OM76102E_(EE)
Replacing the following bulbs
If any of the lights listed below has burnt out, have it replaced by any
authorized Lexus dealer or repairer, or another duly qualified and
equipped professional.
Headlight low beams (LED type)
Daytime running lights and front position lights
LED front fog lights (if equipped)
Side turn signal lights
Stop/tail lights
High mounted stoplight
License plate lights
After replacing the bulbs
LED lights
The headlight low beams (LED type), front position lights, daytime running
lights, LED front fog lights (if equipped), side turn signal lights, stop/tail lights,
high mounted stoplight and license plate lights consist of a number of LEDs. If
any of the LEDs burn out, take your vehicle to any authorized Lexus dealer or
repairer, or another duly qualified and equipped professional to have the light
replaced.
Condensation build-up on the inside of the lens
Temporary condensation build-up on the inside of the headlight lens does not
indicate a malfunction. Contact any authorized Lexus dealer or repairer, or
another duly qualified and equipped professional for more information in the fol-
lowing situations:
Large drops of water have built up on the inside of the lens.
Water has built up inside the headlight.
When replacing light bulbs
P. 537 After removing the power control unit
cover, return the cover to original position
with the clips.
Push up center portion
Insert
Press
1
2
3

5577-3. Do-it-yourself maintenance
CT200h_OM_OM76102E_(EE)
7
Maintenance and care
WA R N I N G
Replacing light bulbs
Be sure to stop the hybrid system and turn off the lights. Do not attempt to
replace the bulb immediately after turning off the lights.
The bulbs become very hot and may cause burns.
Do not touch the glass portion of the light bulb with bare hands. When it is
unavoidable to hold the glass portion, use and hold with a clean dry cloth to
avoid getting moisture and oils on the bulb.
Also, if the bulb is scratched or dropped, it may blow out or crack.
Fully install light bulbs and any parts used to secure them. Failure to do so
may result in heat damage, fire, or water entering the headlight unit. This may
damage the headlights or cause condensation to build up on the lens.
Do not attempt to repair or disassemble light bulbs, connectors, electric cir-
cuits or component parts.
Doing so may result in death or serious injury due to electric shock.
To prevent damage or fire
Make sure bulbs are fully seated and locked.
Check the wattage of the bulb before installing to prevent heat damage.
NOTICE
When replacing the outer foot lights
If the front window is stopping you from conducting the replace operation
properly, open the window on the side you are working on to allow you enough
space to work. Continuing the operation without giving yourself enough space
to work could lead you to scratch the vehicle.

559
8When trouble arises
CT200h_OM_OM76102E_(EE)
8-1. Essential information
Emergency flashers........... 560
If your vehicle has to
be stopped in an
emergency....................... 561
8-2. Steps to take in an emergency
If your vehicle needs to be
towed .............................. 562
If you think something is
wrong .............................. 567
If a warning light turns on
or a warning buzzer
sounds ............................. 568
If a warning message is
displayed ......................... 575
If you have a flat tire (vehicles
with a spare tire) ............. 590
If you have a flat tire (vehicles
without a spare tire) ........ 604
If the hybrid system will not
start ................................. 619
If the electronic key does not
operate properly .............. 621
If the 12-volt battery is
discharged ....................... 623
If your vehicle overheats .. 628
If the vehicle becomes
stuck................................ 632

5608-1. Essential information
CT200h_OM_OM76102E_(EE)
Emergency flashers
Press the switch.
All the turn signal lights will flash.
To turn them off, press the switch
once again.
Emergency flashers
If the emergency flashers are used for a long time while the hybrid system is not
operating (while the “READY” indicator is not illuminated), the 12-volt battery
may discharge.
The emergency flashers are used to warn other drivers when the vehicle
has to be stopped in the road due to a breakdown, etc.

5678-2. Steps to take in an emergency
CT200h_OM_OM76102E_(EE)
8
When trouble arises
If you think something is wrong
Fluid leaks under the vehicle
(Water dripping from the air conditioning after use is normal.)
Flat-looking tires or uneven tire wear
High coolant temperature warning light flashes or comes on
Changes in exhaust sound
Excessive tire squeal when cornering
Strange noises related to the suspension system
Pinging or other noises related to the hybrid system
Engine missing, stumbling or running roughly
Appreciable loss of power
Vehicle pulls heavily to one side when braking
Vehicle pulls heavily to one side when driving on a level road
Loss of brake effectiveness, spongy feeling, pedal almost touches the
floor
If you notice any of the following symptoms, your vehicle probably
needs adjustment or repair. Contact any authorized Lexus dealer or
repairer, or another duly qualified and equipped professional as soon as
possible.
Visible symptoms
Audible symptoms
Operational symptoms

5688-2. Steps to take in an emergency
CT200h_OM_OM76102E_(EE)
If a warning light turns on or a warning buzzer sounds
Calmly perform the following actions if any of the warning lights comes
on or flashes. If a light comes on or flashes, but then goes off, this does
not necessarily indicate a malfunction in the system. However, if this
continues to occur, have the vehicle inspected by any authorized Lexus
dealer or repairer, or another duly qualified and equipped professional.
Warning light and warning buzzer list
Warning lightWarning light/Details/Actions
Brake system warning light and warning buzzer (red indica-
tor)
*1
Indicates that:
• The brake fluid level is low; or
• The brake system is malfunctioning
This light also comes on when the parking brake is not
released. If the light turns off after the parking brake is fully
released, the system is operating normally.
Immediately stop the vehicle in a safe place and contact any
authorized Lexus dealer or repairer, or another duly quali-
fied and equipped professional. Continuing to drive the
vehicle may be dangerous.
Brake system warning light (yellow indicator)
Indicates a malfunction in:
• The regenerative braking system; or
• The electronically controlled brake system
Have the vehicle inspected by any authorized Lexus dealer
or repairer, or another duly qualified and equipped profes-
sional immediately.
Charging system warning light
Indicates a malfunction in the vehicle’s charging system
Immediately stop the vehicle in a safe place and contact any
authorized Lexus dealer or repairer, or another duly quali-
fied and equipped professional.
Low engine oil pressure warning light
Indicates that the engine oil pressure is too low
Immediately stop the vehicle in a safe place and contact any
authorized Lexus dealer or repairer, or another duly quali-
fied and equipped professional.

5698-2. Steps to take in an emergency
CT200h_OM_OM76102E_(EE)
8
When trouble arises
Malfunction indicator lamp
Indicates a malfunction in:
• The hybrid system;
• The electronic engine control system;
• The electronic throttle control system; or
• The emission control system (If equipped)
Have the vehicle inspected by any authorized Lexus dealer
or repairer, or another duly qualified and equipped profes-
sional immediately.
SRS warning light
Indicates a malfunction in:
• The SRS airbag system; or
• The seat belt pretensioner system
Have the vehicle inspected by any authorized Lexus dealer
or repairer, or another duly qualified and equipped profes-
sional immediately.
ABS warning light
Indicates a malfunction in:
•The ABS; or
• The brake assist system
Have the vehicle inspected by any authorized Lexus dealer
or repairer, or another duly qualified and equipped profes-
sional immediately.
Electric power steering system warning light (warning buzzer)
Indicates a malfunction in the EPS system
Have the vehicle inspected by any authorized Lexus dealer
or repairer, or another duly qualified and equipped profes-
sional immediately.
(Flashes)
(If equipped)
“PCS” warning light
Indicates a malfunction in the pre-crash safety system
The warning light will operate as follows, even when the sys-
tem is not malfunctioning:
• The light will flash quickly when the system is operating.
(P. 275)
• The light will turn on when the pre-crash braking is dis-
abled. (P. 276)
• The light will turn on when the system cannot temporarily
be used. (P. 584)
Have the vehicle inspected by any authorized Lexus dealer
or repairer, or another duly qualified and equipped profes-
sional immediately.
Warning lightWarning light/Details/Actions