TRIP BUTTON
This is located on the right-hand stalk fig. 11.
With the ignition key turned to MAR, this button
allows you to view the previously described
parameters and also reset them to begin a new
mission:
❒short press: display various readings;
❒long press: reset readings and start a new
mission.New mission
This begins after a reset:
❒“manual” resetting by the user, by pressing the
relevant button;
❒"automatic" resetting, when the "Trip distance"
reaches 99999.9 km or when the "Travel time"
reaches 999:59 (999 hours and 59 minutes);
❒after disconnection/reconnection of the battery.
IMPORTANT The reset operation when “Trip
A” or “Trip B” details are being displayed resets
the information associated with the function
displayed.
fig. 11
L0F0079
24GETTING TO
KNOW YOUR CAR
SAFETY
STARTING AND
DRIVING
WARNING LIGHTS
AND MESSAGES
IN AN EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
Start of journey procedure
With ignition key at MAR, press and hold the
TRIP button for more than 2 seconds to reset.
Exit Trip
You can automatically exit the TRIP function once
all the values have been displayed or by holding
the button
down for more than 1 second.
SYMBOLSSome car components have coloured labels whose
symbols indicate precautions to be observed
when using this component. Under the bonnet
there is also a label that summarises all the
symbols.
25GETTING TO
KNOW YOUR CARSAFETY
STARTING AND
DRIVING
WARNING LIGHTS
AND MESSAGES
IN AN EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
WHEELS AND TYRESBefore long trips, and every two weeks, check the
tyre and space-saver wheel inflation pressure
(for versions/markets, where provided). Check the
tyres when cold.
While driving the car, the pressure increases under
standard conditions: for the correct tyre inflation
pressure, see "Wheels" paragraph in the
"Technical specifications" chapter.
Incorrect pressure causes abnormal tyre wear
fig. 164:
A normal pressure: tread evenly worn;
B low pressure: tread particularly worn at the
edges;
C high pressure: tread particularly worn in the
centre.The tyres must be replaced when the tread is less
than 1.6 mm thick. In any case, follow the laws
in force in the country where you are driving.
IMPORTANT
Take the following precautions to prevent damage
to the tyres:
❒avoid braking suddenly, racing starts and
violent impact against the curb, potholes or
other obstacles and driving for extended periods
on uneven road surfaces;
❒periodically check that the tyres have no cuts in
the side wall, abnormal swelling or irregular
tyre wear;
❒avoid travelling with the car overloaded. If you
have a puncture, stop immediately and change
the tyre;
❒tyres age even if they are not used much. Cracks
in the tread rubber and at the sides are a sign of
ageing. In any case, if the tyres have been on
the car for over 6 years, they should be checked
by specialised personnel. Also remember to
check the space-saver wheel very carefully (for
versions/markets, where provided);
❒change the position of the tyres every 10-15
thousand kilometres, keeping them on the same
side of the car to avoid inverting the direction
of rotation;
fig. 164
L0F0018
232
GETTING TO KNOW
YOUR CAR
SAFETY
STARTING AND
DRIVING
WARNING LIGHTS
AND MESSAGES
IN AN EMERGENCYSERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
❒
avoiding those of dubious origin;
❒if a tyre is changed, also change the inflation
valve.i n the case of replacement, always fit new tyres,
Side lights/brake lights ....... 200
Side lights/day lights
(DRL)
– bulb replacement............ 195
Snow chains........................ 16
Sound system (wiring) ........ 106
Speedometer (speed
indicator) ........................... 5
Starting the engine ...... 154-178
Starting up and driving....... 154
Start&Stop system ............... 99
Steering .............................. 247
Steering lock ........................ 31
Steering heel ................. .... 36
Steering wheel stalks
– left stalk .......................... 54
Storing the car .................... 163
Sun roof ............................... 76
Sun visors ............................ 75
Suspension.......................... 247Technical data.................... 241
The keys .............................. 27
Third brake light ................ 200
Top speed ........................... 256Towing the car .................... 215
Towing trailers .................... 16
Transmission ...................... 245
Trip Computer
– TRIP button .................... 24
– Trip Computer ................. 21
– Trip Computer
parameters ...................... 22
Ty r e s
– correct tyre reading ........ 248
– Fix&Go Automatic (kit) . 185
– inflation pressures .......... 253
– Rim Protector tyres ........ 254
– snow tyres ...................... 250
– tyres provided ................ 250
Tyres - maintenance............ 232
"Universal" child seat
fitting................................ 146Universal Isofix (child
seat).................................. 143
Using the gearbox ............... 15W
arning lights on panel ..... 164
Weights and loads ............... 257
Welcome movement ............. 9Wheel rims
– correct reading of the
wheel rim ....................... 250
– dimensions ..................... 250
– rims and tyres ................ 248
– wheels and tyres ............. 232
Wheels and tyres
– changing a wheel ............ 179
– Fix&Go Automatic (kit) . 185
– spare wheel .................... 248
– tyre inflation pressure..... 253
– Wheels and tyres ............ 232
Window bag........................ 150
310
GETTING TO KNOW
YOUR CAR
SAFETY
STARTING AND
DRIVING
WARNING LIGHTS
AND MESSAGES
IN AN EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
Window cleaning .................. 58
Windows (cleaning) ............ 238
Windscreen washer
– windscreen washer fluid
level ............................... 228
Windscreen washer sprays .. 235
Windscreen washer/wiper..... 58
Windscreen wipers
– blades............................. 233
– level check ....... 224-225-226
– replacing wiper blades .. 234
Fiat Group Automobiles S.p.A. - Parts&Services - Technical Services - Service Engineering
Largo Senatore G. Agnelli, - 10040 Volvera - Torino (Italia)
603. . - - 1 Edi3
99 2 0 tion Print w.
/201 31
8
241 8