2013 JEEP WRANGLER automatic transmission

[x] Cancel search: automatic transmission

Page 546 of 666

JEEP WRANGLER 2013 JK / 3.G Owners Manual Shifting Out of NEUTRAL (N)
Use the following procedure to prepare your vehicle for
normal usage.
1. Bring the vehicle to a complete stop, leaving it con-nected to the tow vehicle.
2. Firmly apply the

Page 552 of 666

JEEP WRANGLER 2013 JK / 3.G Owners Manual 4. Shift the automatic transmission into PARK, or amanual transmission into REVERSE.
5. Turn the ignition to LOCK.
Block both the front and rear of the
wheel diagonally opposite of the jack-
ing posit

Page 559 of 666

JEEP WRANGLER 2013 JK / 3.G Owners Manual WARNING!
•Take care to avoid the radiator cooling fan when-
ever the hood is raised. It can start anytime the
ignition switch is ON. You can be injured by
moving fan blades.
• Remove any metal jew

Page 561 of 666

JEEP WRANGLER 2013 JK / 3.G Owners Manual Once the engine is started, remove the jumper cables in
the reverse sequence:
6. Disconnect the negative(-)jumper cable from the
engine ground of the vehicle with the discharged
battery.
7. Disconnect

Page 565 of 666

JEEP WRANGLER 2013 JK / 3.G Owners Manual 7. Move the shift lever to the NEUTRAL position.
8. The vehicle may then be started in NEUTRAL.
9. Reinstall the shift lever override access cover.TOWING A DISABLED VEHICLE
This section describes proc

Page 566 of 666

JEEP WRANGLER 2013 JK / 3.G Owners Manual Proper towing or lifting equipment is required to prevent
damage to your vehicle. Use only tow bars and other
equipment designed for this purpose, following equip-
ment manufacturer ’s instructions.

Page 567 of 666

JEEP WRANGLER 2013 JK / 3.G Owners Manual Four–Wheel Drive Models
The manufacturer recommends towing with all wheels
OFFthe ground. Acceptable methods are to tow the
vehicle on a flatbed or with one end of the vehicle raised
and the opposit

Page 569 of 666

JEEP WRANGLER 2013 JK / 3.G Owners Manual MAINTAINING YOUR VEHICLE
CONTENTS
ENGINE COMPARTMENT — 3.6L ..........569
 ONBOARD DIAGNOSTIC SYSTEM — OBD II . .570
▫ Loose Fuel Filler Cap Message ............570
 EMISSIONS INSPECTION AND