2013 JAGUAR XF key

JAGUAR XF JAGUAR XF JAGUAR XF
JAGUAR XF JAGUAR XF JAGUAR XF
3
Driver controlsVehicle access
2
412567
15
19
20
21
22
23
1716
18
2425
29
28
27
2630
3131
32
33
3
891110121314
Turn signals and headlamp control1.

Gearshift down2.
Audio and phone switches3.
Instrument panel, message center and warning lamps4.
Cruise control switches5.
Gearshift up6.
Wiper/washers7.
Central locking/unlocking8.
Touch screen on/off or Intelligent stop/start9.
Touch screen10.
Hazard warning lamps on/off11.
Navigation menu 12.
Phone menu13.
Home menu14.
Climate controls15.
JaguarDrive selector16.
Stability control (DSC) 17.
Speed limiter (ASL)18.
Parking brake 19.
Dynamic mode 20.
Winter mode21.
STOP/START22.
Audio controls23.
Horn/air bag24.
Steering column adjuster25.
Instrument illumination26.
Fog lamps on/off27.
Trunk release28.
Forward alert29.
Mirror controls30.
Powerfold mirror controls31.
Window controls32.
Rear window isolator33.
Unlocking mode alternatives
Single-point entry allows only the driver’s door to
unlock with a single press. A second press unlocks all
other doors and the luggage area.
Multi-point entry will unlock all doors and trunk with a
single press.
To change between modes, with the vehicle unlocked,
press the lock and unlock buttons simultaneously for
3 seconds. The hazard warning lamps will flash twice
to confirm the change .
Jaguar Smart Key
Keyless entry/exit
Press once to lock the vehicle and arm only the exterior alarm.
Multi-point entry - Press once to disarm the alarm,
unlock all doors and unlock the trunk.
Press once to switch the headlamps on for 25
seconds. Press again to switch off.
Press to open only the trunk. The rest of the
security system remains active.
Press and hold for 3 seconds to activate/cancel the panic alarm.
To unlock the vehicle and disarm the alarm, simply
press a door handle button or trunk release button
while the Smart Key is within 3 ft (1 metre) of the
vehicle.
To lock the vehicle and arm the alarm, first ensure
that the Smart Key is outside the vehicle but within
3 ft (1 metre).
Press a door handle button once to lock. To also close
any open window/sunroof, press and hold the button.
Trunk opening
With the vehicle unlocked, press the release button under
the chrome finisher at the rear of the vehicle.
Rear seat release handles
The split fold rear seats have release handles located
inside the luggage compartment. Pull to release one or
both seat backs and fold forward. Head restraints can be
removed if required.
Care points
The Smart Key may not be detected if it is placed
inside a metal container or if it is shielded by a
device with a back lit LCD screen, (e.g. laptop,
smartphone etc.) Keep the Smart Key clear of such
devices when attempting Keyless entry or Keyless
starting.
Do not leave your Smart Key in the luggage
compartment, the vehicle WILL NOT automatically
unlock (should it become shielded).
Emergency key access
Slide the side section up to remove. Remove the
keyblade and unfold it.
Use the blade to release the front left side door lock
cover.
Insert the key into the exposed lock and turn towards the
front of the vehicle, then release it to unlock.
If the security system was previously armed with the
Smart Key, when the door is unlocked the alarm will
sound. To disarm the alarm, press the unlock button on
the Smart Key or press the START/STOP button with the
Smart Key inside the vehicle.
Operating note
If the Smart Key fails to operate, hold it against the
facia below the auxiliary switch pack. Start the engine
as normal. The Smart Key can now be removed.
Vehicle
access
JJM189640131.indd 2-301/08/2012 13:45:04

JAGUAR XF JAGUAR XF JAGUAR XF
JAGUAR XF JAGUAR XF JAGUAR XF
Setting the driving position See page 2, items 25, 30 and 31 Engine start/stop See page 2, item 22
Transmission See page 3, items 2, 6 and 16
Restraints
Comfort adjustments Starting and driving
5
4 Driver’s seat
Set the seat position using the following controls.
Cushion length.
1.
Side bolster - inflate.2.
Side bolster - deflate.3.
Lumbar support.4.
Seat back angle and head restraint.5.
Seat forwards and back, cushion height and cushion 6. angle.
Note: Seat heater controls are accessed via the touch
screen.
Steering column
With the vehicle stationary, adjust the steering column
7. to your ideal driving position.
Door mirrors
1. Press the left or right mirror selector.
2. Use the mirror adjuster to set mirror position.
Storing the driving position to memory
Once you have adjusted the driver’s seat, steering
column and door mirrors for your ideal driving position,
the settings can be stored.
8. Press the SET button to activate the memory store
function. The button will illuminate to indicate the memory
store function is active.
9. Within 5 seconds, press button 1 or 2 to store the
current driving position.
A stored memory position can now be recalled with a
press of the appropriate button; 1 or 2. The seat, steering
wheel and mirrors will move to their preset positions.
Operating note
Memory buttons must be pressed within 5 seconds
after pressing the SET button otherwise the memory
store function will cancel.
Operating note
The engine will continue to run even if the Smart
Key is removed from the vehicle by more than 3ft (1
metre). However, if the engine is stopped, it cannot
be restarted until the Smart Key is returned to the
vehicle.
Operating note
If the engine is switched off with Neutral selected,
automatic selection of P is delayed for 10 minutes.
DO NOT use this feature to enable towing of the vehicle. Refer to Vehicle recovery in the Owner’s
Handbook.A warning indicator on the instrument panel will illuminate if the seat belt of an occupied
front seat is not fastened. This may be
accompanied by an audible warning.
Using child seats
Refer to Child Seats in the Owner’s Handbook to
determine the correct seat for your child.
If it becomes necessary to fit a child restraint on the front
passenger seat, make the following seat adjustments. Move the seat fully rearward.•
Lumbar support to minimum setting.•
Seat cushion to highest position.•
Cushion front tilt to lowest position.•
Seat back to upright position.•
Adjust the upper seat belt anchorage to its lowest • position.
Ignition on:
With the Smart Key inside the vehicle, press the
• START/STOP button to switch on ignition.
A second press will switch off the ignition.
•
Engine startThe selector lever must be in
• Park or Neutral position
to enable engine starting.
With the foot brake depressed, press and release the
• START/STOP button to start the engine.Press again to stop the engine and switch off the
• ignition.
Rolling start
If the engine is switched off while the vehicle is moving, it
can be restarted by selecting N position then pressing the
START/STOP button.
Gearshift interlock The brake pedal must
be depressed before the
selector can be moved
from the Park position.
Maintain brake pressure
until a gear is selected.
Select P before switching
off the engine. However,
if the engine is switched
off with Reverse, Drive
or Sport selected, the
selector will automatically
return to P while
retracting.
Automatic gear selection
Select D for fully automatic gear changes.
Sport mode
This is an automatic gear change mode, however,
change points are modified to make full use of
engine power.
Press the selector down and rotate from D to Sport.
Manual gear changes
Manual gear change mode is effective when rapid
acceleration and engine braking are required.
To shift down, briefly pull the left-side paddle.
•
To shift up, briefly pull the right-side paddle.•
P R N D S
STARTENGINESTOP
DSC
5432
1
6
8
7
9
When the paddles are used in D, gear selection
will revert to automatic if use of the paddles is not
maintained. With S selected, continuous manual
operation is initiated if the paddles are used.
Note: To return to automatic operation pull and hold
the right-side paddle for 2 seconds.
JJM189640131.indd 4-501/08/2012 13:45:07

JAGUAR XF JAGUAR XF JAGUAR XF
JAGUAR XF JAGUAR XF JAGUAR XF
JaguarDrive control See page 2, items 17, 20 and 21 Parking aids
Glovebox valet mode
Door mirrors and blind spot monitoring
Driving aids Driving aids
Winter mode, Dynamic mode and Dynamic Stability
Control (DSC) allow the driver to more finely tune the
vehicle driving characteristics to suit prevailing conditions.
Winter mode.
1. Use in slippery road conditions.
Selects 2nd gear for driving away, moderates engine
response and modifies gear change strategy to ensure
maximum possible traction is achieved.
Dynamic mode.
2. Optimises vehicle systems to
deliver a high performance driving experience. If Sport
mode is now used with paddle gear selection, there is no
automatic gear change, even if the rev limit is reached.
Dynamic mode remains selected for 6 hours after the
engine is switched off
DSC.
3. The default condition at engine start is DSC on
and is designed to control vehicle stability.
2
13
TracDSC is an alternative setting that optimises the
DSC settings for maximum traction in difficult conditions.
TracDSC enables a more involving and focused driving
experience. To select TracDSC, press and release the
button. Touch again to return to DSC. To turn DSC off,
press for more than 10 seconds.
Message center
The Message center displays the
JaguarDrive Selector position,
P, R, N, D or S, the manual mode
gear selections 1 to 6 (or 1 to 8)
and the JaguarDrive Control mode
selection.
When TracDSC is selected, the DSC warning lamp will
illuminate and the Message center will briefly display
TRAC DSC.
When DSC OFF is selected, the DSC warning lamp will
illuminate and the Message center will display DSC OFF
until DSC is reinstated.
Driving mode settings
Refer to the Owner’s Handbook section, Stability
control, for examples of JaguarDrive settings.
Blind spot monitoring
Each mirror displays amber icons to warn of overtaking
vehicles in adjacent lanes. The monitored area extends
approximately 20 ft (6 meters) behind your rear wheels
and 8.2 ft (2.5 meters) to the sides.
It switches on automatically at speeds above 10mph
(16km/h) while in a forward gear. An amber dot
illuminates when speed is below the threshold.
Mirror dip when reversing
This feature can be used to improve lower side views
while reversing. It can be enabled or disabled via the
touch screen. From the Home screen, select Vehicle,
then
Veh.
settings, then Parking.
To set a dip position:
• with the electric parking brake on, select reverse gear
• adjust the mirror position to view the lower rear kerb
and vehicle.
Subsequently, each time reverse gear is selected, the set
dip position will be automatically selected. The mirrors
will return to their normal position when another gear is
selected.
8 9
When Reverse is selected, the rear and front parking
aids and rear view camera will activate.
The touch screen will display a vehicle graphic and
indicate the approximate distance to any object
detected. An audible alert will increase in frequency as
the object is approached.
When moving forward into a space,
activate the front sensors with the
parking aid switch in the overhead panel.
Alternatively, select R then Drive.
Audible alert volume can be adjusted via the touch
screen. From the Home screen, select Set-up, then
System, then Volume presets. Use the + or - soft keys
alongside Parking aid to adjust volume.
Cancelling the parking aid screen
Touch the screen to return to the previous view. Rear view camera
Activates when Reverse is selected. Guidance lines to
aid reversing appear on the touch screen. The camera
display has priority over the parking aid display. To view
the parking aid display instead, or cancel the display at
any time, touch the display.
Note: Sensors may activate when water, snow or ice are
detected on the surface of the sensors. Ensure that the
sensors are cleaned regularly.
To open the glovebox, press the facia mounted switch.
Valet mode
The glovebox and luggage compartment can be security
locked to deny access to a parking attendant. Before
handing over your Smart Key, remove the emergency key
blade and keep it in a safe place.
To set your Personal Identification Number (PIN) :
• On the touch screen select Home menu.
• Now select Valet.
• Enter a your 4 digit PIN (personally chosen) and touch
OK. Valet on is displayed as a confirmation.
To deselect valet mode
Access the Valet screen and enter your 4 digit PIN. Now
press OK. Valet off is displayed and the glovebox and
luggage compartment are now accessible.
Insert the emergency key blade back into the Smart Key.
Powerfold mirrors - See page 2, item 31
Press buttons simultaneously to fold the mirrors
inward. Press again to unfold.
JJM189640131.indd 8-901/08/2012 13:45:15

JAGUAR XF JAGUAR XF JAGUAR XF
JAGUAR XF JAGUAR XF JAGUAR XF
Audio controls See page 2, items 9, 10, 14 and 23
AM/FM and HD radio
Satellite radio
CD player and portable media
Audio and touch screen Audio and touch screen
10 Satellite Radio subscription service
Use channel 184 to preview satellite radio. When the
preview time expires you will need to subscribe to SIRIUS
to enable further satellite reception.
Touch to select the satellite bands. Touch the
1. + icon to
move through SAT 1, 2 and 3.
Use the seek arrows to move up or down to the next
2. or previous channel.
Channel information. Select if there is more
3. information than can fit in the display area. Channel presets. Each
4.
SAT band has 6 preset soft
keys. Touch and hold a soft key to store the current
channel. A brief touch will access the stored channel.
Select to make personal settings in
5. Options,
Channel skip and Parental lock areas.
View a list of available categories.
6.
Select to access the touch pad. Enter any 3 digit 7. channel number then select OK.
Touch to view a list of channel categories. Select one
8. to display full details of that channel and the current track.
Store the currently playing track to the song memory.
9. If the audio system subsequently finds a stored track
playing on a subscribed channel, notification will be given.
11
Œ(Œ(
Œ(

12345678
Eject CD.1.
Press repeatedly for available audio sources.2.
Press for audio on/off. Rotate for volume.3.
Press for the 4. Audio/Video menu.
Seek Down and Up buttons for previous/next 5. radio station or CD track. Hold to enter manual seek mode.
Press repeatedly for touch screen on/off and screen
6. saver options (or Intelligent stop/start on/off).
Touch any screen soft key to make a selection.
7.
Return to Home screen.8.
Touch screen damage
The touch screen requires only light touches.
Excess pressure could result in damage.
Turn on the audio system. On the touch screen Home
Menu, touch the Audio/Video option. The last used audio
source controls will be displayed. If another audio source
is displayed, touch the Radio soft key.
Touch to change to radio or to view wavebands. The
1. +
key will change to -. Touch - to exit waveband.
Move up or down to the next or previous station.
2.
View information broadcast by the radio station. 3.
Settings menu, select from 4. RDS, Traffic, News, AF
and REG.
Station list (FM only). Select to view a list of available
5. stations on the waveband. The list can be sorted by Frequency, Name or Category (pop, news, sport), by
selecting the appropriate soft key. Touch to select the
chosen station.
Enter a station frequency. When the final digit is
6. entered the station will be tuned.
Preset soft keys. Can store 6 stations for each
7. waveband. Touch and hold a softkey to store the current
radio station. From the Audio/Video menu, select My music + to
display the audio choice menu.
Touch the
1. My music + icon to display all options.
Select an option.
Settings
2. menu, select to switch traffic and news
announcements on or off.
Depending on the selected mode, this soft key will
3. be either Track list or Browse. In Stored CD mode, both soft keys will be displayed. Select Track list to view
current CD or Stored CD track list. Select a track to start
playback. Select Browse to view the contents of selected
device (iPod
®, USB and Stored CD modes only).
Upload
4. soft key is applicable to Stored CD menu
only. To store a CD select Upload alongside an empty
slot. There are 10 slots available.
Touch and release to skip up or down to the next or
5. previous track. Touch and hold to scan forwards or back
through the current track.
Repeat
6. , touch and release to repeat the current track
continuously.
Touch and release again to repeat the current stored CD
(or folder for MP3 discs).
Touch and release a third time to cancel Repeat mode.
Pause/Play
7. . Select to pause playback, select again to
resume playback.
View
8. information about the current track.
Shuffle
9. , touch and release once to play random
tracks from the current CD, MP3 folder, USB folder or
iPod
playlist.
Touch and release again to play random tracks from CD,
MP3 disc, USB folders or tracks on the media device or
tracks loaded onto the stored CD store.
Touch and release a third time to cancel Shuffle mode.
Incompatible disc types
The use of discs with paper labels or dual format
discs (Dual Discs or DVD Plus) should be avoided
as they could become jammed inside the player. Activating satellite radio
Call SIRIUS on the displayed telephone number.
1.
Provide them with the ID number, also displayed on 2. screen.
You will also need your credit card. Ensure you are
parked with a clear view of the sky while activation takes
place. Activation can take up to 15 minutes.Note: Use the seek buttons on the steering wheel
to find preset channels.
3
45644444444444445555555555556666666666666Preset 22333333333333333333Preset 11
Program information Frequency Station
Radio
Radio: FM 2
Station list
input Frequency Settings
17:40
SAT Radio
My music
My video
Preset 3
Preset 4 Preset 5 Preset 6
1232
4
5
6
7
3
456
3
45 6
3
456444444444444444445555555555555566666666666666Preset 223
45 6Preset 11
Programme title
Channel No
17:40SAT Radio
Channel list
Browse
Add song Channel
Input Settings
333333333My music
My video
Preset 3
Preset 4 Preset 5 Preset 6
SAT Radio
Radio
12324
5
6
7
8
9
(40%)
Uploading
Browse
Track list
Settings
ShuffleShuffle
Repeat
Chasing Cars
Snow Patrol
Eyes Open
Tr 3
/15Shuffle02.32My music My music
SAT Radio
Radio
17:40My music: Stored CDs
1
2
3
4
567895
My video
JJM189640131.indd 10-1101/08/2012 13:45:16

JAGUAR XF JAGUAR XF JAGUAR XF
JAGUAR XF JAGUAR XF JAGUAR XF
NavigationTelephone
1415
Touch screen navigation Bluetooth® phones See page 2, item 3
Telephone echo
If echo is experienced when using the phone, reduce
the audio system volume during the call.
On initial activation, ensure
that both the correct country
and search area have been
selected.
For more information refer to
the Navigation section of the
Owner’s Handbook.
Note: To access navigation press either the NAV hard
key or touch the Nav icon on the Home menu. Use to enter a new destination. Provides a choice of
1. options when entering a destination.
Displays previous destinations entered.
2. Previous
destinations can be selected as a new destination.

3. Turns the POI (Point Of Interest) icons on the map
on/off.
When a destination is set, the Jaguar logo in this
4. position is replaced by a soft key which enables the last
voice instruction to be repeated.
Soft key is highlighted while voice guidance is
5. enabled. Touch to turn voice guidance off.
POI shortcuts: Touch icon to list available POIs that
6. are close to the vehicle position.
Calculates a detour from the current route.
7.
Advances to the main map screen.8.
Use the 9. More... soft key to toggle between menu 1
of 2 and menu 2 of 2. Menu 2 of 2 features soft keys for
Stored locations, TMC, Route options and Nav set-up.
Stored locations is used to manage the stored data.
TMC (Traffic Message Channel) will provide data about
road conditions and any events that may affect the
current route.
Route options allows the selection of various options for
the route.
Nav set-up is for setting personal preferences within the
navigation system.
Cancel current route guidance.
10.
Selecting navigation
When navigation is selected after the ignition is turned
on, a caution screen is displayed. Touch Agree.
Note: At the first time of accessing the caution screen,
set the required language.
Setting a destination
Select Destination entry.
Select Address and enter address details using the
keyboard. As each part of the address is refined, touch
OK or List to display all the streets and towns that are
available to be selected. If the house number is not
known, press OK, the mid-point of the road is then used
as the destination.
When the address entry fields are complete, press OK to
move to the map screen.
Start guidance
When in the map screen touch GO to start guidance.
Review route.
There will be a choice of 3 routes or Change route. 3
routes will display 3 different route options on the map.
Select Route 1, 2 or 3 by touching the respective box
displayed on the right side of the map and then select
GO.
Calls via the touch screen
With a phone paired and active, press the PHONE button
below the touch screen.
Select
1. Digit Dial, Phonebook or Last 10.
With Digit Dial selected, use the keypad to enter the
number.
With Phonebook selected, chose a number from the
downloaded phonebook.
Last 10 displays the previous 10 calls. Choose one to
dial.
To make the call touch the connect icon .
2. The icon will change to a connected call icon.
To end a call touch
3. .
Connection must be made with ignition on or engine
running.
Use the following procedure in conjunction with your
phone manufacturer’s instructions.
Pairing and connecting using your phone
Note: The process of pairing and connecting a phone
to the vehicle will vary depending on the type of phone
used.
Switch the ignition on and ensure that the touch
1. screen is active.
From the
2. Home menu, select Phone.
The
3. Phone menu will display. If no phone is
connected, select Search new, otherwise select Change
phone and then select Search new.
Select
4. Device to vehicle option.
NOTE: The vehicle’s Bluetooth® wireless technology
system is discoverable for only 3 minutes. Using your phone, search for Bluetooth® wireless
5. technology devices. On some phones, this is referred
to as new paired device. See your phone’s operating
instructions for further information.
When the vehicle’s system is discovered, begin the
6. pairing process and follow the on-screen instructions.
When requested, enter a PIN of your choice into your
7. phone and the vehicle system.
Once your phone is paired it may automatically
8. connect to the vehicle system. If not, use the device list
shown on the touch screen or use your phone.
NOTE: Some phones require the pairing to be set as
‘authorised’ or ‘trusted’ in order to automatically connect.
Please refer to your phone’s operating instructions for
further information.
Downloading phonebook entries
When a phone with phonebook download capability
is paired and docked, its phonebook directory can be
automatically downloaded to the vehicle system.
See PHONEBOOK in the Owner’s Handbook for more
information.
Phonebook
Last 10
Phone10:36
Digit Dial Settings
DeleteChange
phone
Name
01234567890_
Use
handsetPQRS
TUVWXYZ
1ABC
DEF
JKL MNO
GHI2
3
4 5
6
7 8
9
0 #
+
Calls via the steering wheel controls
Volume control. Turn to increase/decrease call 1.
volume.
Scroll control. Turn to scroll up/down lists of calls or
2. phone book entries.
Phone/Voice control. Press and release to send,
3. accept or end a call. If Voice control is not fitted, in
addition to the above, press and release to access Last
10 dialed list; press and hold to access the phonebook
search view.
2
3
1
JJM189640131.indd 14-1501/08/2012 13:45:21