2013 INFINITI M HYBRID light

11
Automatic Drive Positioner
two positions for the driver’s seat, steering column
and outside mirrors can be stored in the automatic
drive positioner

01 memory.

Follow these procedures to set the memory positions:
• Confirm the shift lever is in the P (PARk) position.
• Push the ignition switch to the ON position.
• Adjust the driver’s seat, steering column and outside mirrors to the desired positions using
the adjusting switches for each feature.
• Push the SE t switch and within 5 seconds, push the memory switch (1 or 2) for at least
1 second.
• The indicator light on the memory switch you select will illuminate for approximately 5 seconds.
• The driver’s seat, steering column and outside mirror positions are now set to your preference.

these memorized positions can also be linked to your InFInItI Intelligent k ey™.
For more information, refer to the “Pre-driving checks and adjustments (section 3)” of your Owner’s Manual.
01
Outside Mirror Control Switch

to select the right or left side mirror, move the control
switch

01 right or left.


Adjust each mirror to the desired position using the
switch

02 .

to fold the outside rearview mirrors, push the switch

03 to the
position. to unfold the outside
rearview mirrors, push the switch

03 to the
position.
ReveRS e tIL t-dO wn FeA tuRe

when backing up the vehicle, the right or left outside mirror can be selected to automatically
turn downward.
1. push the ignition switch to the ON position.
2. Move the shift lever to the R (REVERSE) position.
3. choose the right or left outside mirror by operating the outside mirror control switch

01 .
4. the outside mirror surfaces move downward.

when one of the following conditions has occurred, the outside mirror surfaces will return to
their original positions.
• the shift lever is moved to any position other than R (REVERSE).
• the outside mirror control switch is set to the center “neutral” position.
• the ignition switch is pushed to the OFF position.
For more information, refer to the “Pre-driving checks and adjustments (section 3)” of your Owner’s Manual.
01
0203

2013 Infiniti M Hybrid Delivery Checklist
Heating, Ventilation and Air Conditioning
Demonstrate Yes
1. CLIMA tE button

2. Fan Speed control

3. Mode control
4. A/c function
5. d
efrost and d efog operation (include recirculation button)
All information, specifications, photographs and illustrations are those in effect at the time of printing. InFInItI

reserves the right to change specifications or design without notice and without obligation. For additional
information, see your InFInItI retailer or contact nISSAn north America, Inc. See your Owner’s Manual for
important warnings and details on vehicle operation and maintenance.
QR3e Hy51u0
printing: April 2012 (03)
printed in uSA
Owner’s Signature date

Sales consultant’s Signature date

Sales Manager’s Signature date
Cruise Control Ye s
1. Activate cruise control

2. Set cruise control

3.
Reset at a faster cruising speed
4.
Reset at a slower cruising speed
5.
cancel cruise control
6. turn off cruise control
Headlight Control
Ye s
01 Activate the front parking, side marker,
tail and license plate lights
02 Activate the headlights
03 Activate the Autolight System
04 Activate the high beams
05 Flash the high beams
06 Activate the fog lights
03
01
02
04
05
06

12
first drive features
Assist Charge Gauge
this meter displays the condition of the electric motor.

when the needle is between the center and PWR
01 ,


this indicates that the electric motor is providing
power to the drive wheels and the Li-ion battery is
discharging.

when the needle is between the center and CHG
02 ,
this indicates that the electric motor is generating
power to recharge the Li-ion battery.
For more information, refer to the “Hybrid System Overview” section and the “Instruments and controls (section 2)” of your
Owner’s Manual.
Starting/Stopping the Hybrid System

depress the brake pedal.

press the ignition switch S tAR t/S tOP button to start
the hybrid system.

the ready to drive indicator light
01 will illuminate
in the meter and you may begin driving the vehicle.
nOte: It is important to make sure the InFInItI Intelligent
key
™ is with you (that is, in your pocket or purse).
TURNING THE HYBRID SYSTEM OFF

Move the shift lever to the P (PARk) position and
apply the parking brake.

press the ignition switch S tAR t/S tOP button to
turn the hybrid system off.
eMeRGency enGIne SHut OFF
t o shut off the engine in an emergency situation while driving, perform one of the following procedures:

Rapidly push the push-button ignition switch 3 consecutive times, or

push and hold the push-button ignition switch for more than 2 seconds.
For more information, refer to the “Starting and driving (section 5)” of your Owner’s Manual.
01
02
01

13
Headlight Control Switch
HeAdLIGHt cOntROL

turn the headlight control switch to the
position

01 to turn on the front parking, side marker, tail, license
plate and instrument panel lights. turn the switch to
the

position
02 to turn on the headlights.
A ut OLIGHt S yS teM

the autolight system will automatically turn the headlights on when it is dark and off when it is
light. the system will keep the headlights on for a period of time after you turn the ignition off
and all doors are closed.

to activate the autolight system, turn the headlight control switch to the AU tO position
03
then push the ignition switch to ON.
to deactivate the autolight system, turn the headlight
control switch to the OFF,

01 or
position
02 .

HIGH BeAM S eLect

push the headlight control switch forward
04 to
select the high beam function. the blue indicator light

illuminates in the instrument panel. p ull the
headlight switch back to the original position to
select the low beam. the blue indicator light goes off.

pull and release the headlight control switch
05 to
flash the headlight high beams on and off.
FOG LIGHt S wItcH
nO te: the headlights must be on and the low beams

selected for the fog lights to operate.

turn the switch (inside collar) to the
position
06
to turn the fog lights on.

turn the switch (inside collar)
to the OFF position to
turn the fog lights off.
For more information, refer to the “Instruments and controls (section 2)” of
your Owner’s Manual.
03
01
02
04
05
06

16
first drive features
07 FAN SPEED CONtROL BUtt
ONS


press the left button to decrease the fan speed or press the right
button to increase
the fan speed.
08 DEFROS
tING/DEFOGGING FRONt AND SIDE WINDOWS

press the defroster control button
to turn the system on.
the A/c automatically turns
on when the defroster mode is selected. this feature removes humidity from the air.

to defrost the front and side windows, set the temperature controls
03 and fan speed

controls
07 to their maximum settings.

09 DEFROS
tING REAR WINDOW AND OUt SIDE MIRRORS

push the rear window defroster switch
to turn the system on or off.

this function automatically turns off after approximately 15 minutes.
10 FORES
t BUtt ON

press the forest button
to activate the Forest Air® system.


this system’s settings will activate the breeze mode, the outside odor and exhaust gas
detection sensor, the inside air quality sensor and the auto humidity control. the fan
speed and air flow is automatically set to the auto position.
11 INt
AkE AIR CONtROL BUtt ON


press the intake air control button to recirculate interior air inside the vehicle.
the
indicator light on the button will illuminate. this system is used to avoid certain
outside odors and helps to adjust the inside vehicle temperature more effectively.

the air recirculation mode cannot be activated when the air conditioner is in the front
defrost mode

.


press the intake air control button again to change the air circulation from the intake
air to the outside air. the
indicator light on the button will turn off.
12 OFF BUtt
ON

press the OFF button to turn the climate control system off.
For more information, refer to the “Monitor, climate, audio, phone and voice recognition systems (section 4)” of your Owner’s Manual.

Intelligent Cruise Control (ICC) System (if so equipped)
veHIcLe-t O- veHIcLe dIStAnce cOntROL MOde

to set vehicle- to- vehicle distance c ontrol mode,
press the CRUISE ON/OFF button

01 for less than
1.5 seconds. the CRUISE indicator light
02 will

illuminate.

Accelerate to the desired speed.

push down on the COAS t/SEt switch
03 and release
it. cruise c ontrol will be set to the desired speed.
18
first drive features
0807
03
01
04
USB/iPod® Interface
the uSB jack
01 is located in the center console under

the arm rest.

when a compatible uSB memory device or ip od®
is plugged into the uSB jack, compatible
audio and video files stored on the device can
be played through the vehicle’s audio system
and front display.
For more information, refer to the “Monitor, climate, audio, phone and voice
recognition systems (section 4)” of your Owner’s Manual.
Conventional (Fixed Speed) Cruise Control

the cruise control system enables you to set a constant
cruising speed once the vehicle has reached 25 mph.

the system will automatically maintain the set speed
until you tap the brake pedal, accelerate, cancel or
turn the system off.

to activate the cruise control, push the ON/OFF
switch

01 . the
CRUISE
indicator light in the
instrument panel will illuminate.

to set cruising speed, accelerate the vehicle to the desired speed, push the COAS t/SEt switch


02 and release. the
CRUISE SEt
indicator light
in the instrument panel will illuminate.

t ake your foot off the accelerator pedal. your vehicle will maintain the set speed.

to reset at a faster cruising speed, push and hold the ACCEL/RES switch
03 . when the

vehicle attains the desired speed, release the switch.

to reset at a slower cruising speed, push and hold the COAS t/SEt switch
02 . Release the

switch when the vehicle slows to the desired speed.

to cancel the preset speed, push the CANCEL switch
04 .

to turn off cruise control, push the ON/OFF switch
01 . Both the CRUISE indicator light and

the SEt indicator light in the instrument panel will turn off.
For more information, refer to the “Starting and driving (section 5)” of your Owner’s Manual.
01
03
02
04
01

19
0205
06
Fuel-Filler Door
the fuel-filler door is located on the passenger’s side of
the vehicle.

when the doors of the vehicle are locked or unlocked,
the fuel-filler door is automatically locked or unlocked
at the same time.

to open the door, once unlocked, push the upper left
side of the door.
For more information, refer to the “Pre-driving checks and adjustments
(section 3)” of your Owner’s Manual.

press the distance button
04 repeatedly to change
the set distance between long, middle, and short.

when a vehicle is not detected ahead of you in the
lane, the set distance and set vehicle speed indicator
lights will illuminate

05 in set mode.

when a vehicle is detected ahead of you in the lane, the vehicle ahead
detection, set distance, and set vehicle speed indicator lights will
illuminate

06 in set mode.

to reset at a faster cruising speed, push and hold the ACCEL/RES switch 07 . when the

vehicle attains the desired speed, release the switch.

to reset at a slower cruising speed, push and hold the COAS t/SEt switch
03 . Release the

switch when the vehicle slows to the desired speed.

to cancel the preset speed, push the CANCEL switch
08 or tap the brake pedal.
the set
vehicle speed indicator
05 will go out.

to turn off cruise control, press the CRUISE ON/OFF button
01 . the
CRUISE indicator light

02 , in the instrument panel, will turn off.
t o set conventional (fixed speed) cruise control mode:

while cruise control is off, press the CRUISE ON/OFF
button
01 and hold it down for more
than 1.5 seconds. the
CRUISE indicator light will illuminate.

Accelerate to the desired speed.

push down on the COAS t/SEt switch and release it. the SEt indicator light will illuminate.
c ruise control should be set to the desired speed.
t o switch between the two cruise control modes:

when one of the two cruise modes is in use, you must turn the system off, and then turn it on
again to select the other cruise control mode.
For more information, refer to the “Starting and driving (section 5)” of your Owner’s Manual.

24
system guide
01
020304
0908
1110
0706
05
Navigation System (if so equipped)
01 t
ouch screen display.
02 d
estination (DESt) – press to enter a destination.
03 Information
(INFO) – press to display the vehicle, traffic (if so equipped), weather (if so
equipped) or voice recognition information.
04 SEttING – press to access the system settings.

05 Multi-Function c
ontroller
• ENtER – press the ENtER button to select the highlighted item on the screen.
• center dial – turn the dial to highlight an item on the screen, adjust a setting or adjust the
map scale.
• Slide the controller (push upward/downward/leftward/rightward) to select an item on the
screen, to adjust a setting or scroll the map in 8 directions.
06 ROUtE – press to access guidance control functions such as guidance cancellation, route

priority or waypoint setting on the route.