2013 INFINITI M HYBRID light

Black plate (33,1)
[ Edit: 2012/ 11/ 8 Model: 08TJ-N ]
“Setting map orientation”
(page 3-14)
*9Scale indicator:
Indicates the scale of the map.
Touch the icon to display the scale bar.
The map scale can be adjusted using
the scale bar.
“Operating with touch panel op-
eration” (page 3-5)
*10Street name:
Displays the name of the street that
the vehicle is currently driving on.
*11IVR soft button (if so equipped):
Touch the icon to connect to the Infiniti
Connection
TMInteractive Voice Menu.
“Connecting to Interactive Voice
Menu”(page 7-10)
INFO:
Infiniti Connection Interactive Voice Menu is a
feature of Infiniti Connection. Use of this feature
is dependent upon a valid subscription and the
telematics device being in operative condition,
as well as cellular connectivity, navigation map
data and GPS satellite signal reception being
available.
SETTING VOICE GUIDANCE
TURNING VOICE GUIDANCE ON/OFF
Voice guidance can be activated or deac-
tivated.
IGT01191. Push .
2. Highlight [Guidance Settings] and push .
IGT01203. Highlight [Guidance Voice] and push
. The indicator illuminates if
voice guidance is activated.
Other settings
Voice guidance can also be activated or
deactivated by performing the following
procedure.
IGT01211. Push .
2. Highlight [Volume & Beeps] and push .
3. Highlight [Guidance Voice] and push .
ADJUSTING VOICE GUIDANCE VO-
LUME
The volume of voice guidance can be
adjusted.
2. Getting started
2-25
Condition: Language=NAM_English/

Black plate (34,1)
[ Edit: 2012/ 11/ 8 Model: 08TJ-N ]
2. Getting started
2-26
IGT01191. Push.
2. Highlight [Guidance Settings] and push .
IGT01223. Highlight [Guidance Volume] and push.
IGT01234. Adjust the volume of voice guidance byusing the INFINITI controller.
Other settings
The volume of voice guidance can also be
adjusted by performing the following
procedure.
IGT01241. Push .
2. Highlight [Volume & Beeps] and push . 3. Highlight [Guidance Volume] and push
.
4. Adjust the volume of voice guidance by using the INFINITI controller.
INFO:
The guidance volume can also be adjusted by
turning the audio system volume control knob
or pushing <+>/<−> on the steering wheel while
voice guidance is being announced.
“Steering wheel switches” (page 2-7)
Condition: Language=NAM_English/

Black plate (55,1)
[ Edit: 2012/ 11/ 8 Model: 08TJ-N ]
IMA0091Example: The most detailed level (2D map)
IMA0092Example: The widest level (2D map)
IMA0093Example: The most detailed level (Bird-viewTMmap)
IMA0094Example: The widest level (BirdviewTMmap)
INFO:
The traffic information icons are not displayed
on the map screen when the map scale is set to
32 miles (64 km) or higher.
“Traffic information display and scale
levels”(page 7-19)
CHANGING MAP VIEW
The map view can be changed between the
2D and BirdviewTMmaps. The map can also
be displayed in the split screen mode.
IMA00951. Push while the current location
map screen is displayed.
IMA00972. Highlight [Map View] and push
.
3. Map settings
3-11
Condition: Language=NAM_English/

Black plate (56,1)
[ Edit: 2012/ 11/ 8 Model: 08TJ-N ]
3. Map settings
3-12
IMA00973. Highlight [Change View] and push theright button of the directional buttons
or push the slide switch to the right.
4. Highlight the preferred map view and push . The indicator of the
selected map view illuminates.
5. The display automatically returns to the map screen.
Available views . [2D Map]:
Switches to the 2D map.
. [Birdview (3D)]:
Switches to the Birdview
TMmap.
. [Split: 2D Map]:
Changes to the split screen mode and
both halves display maps in 2D.
. [Split: Birdview Map]:
Changes to the split screen mode and the left half displays the map in 2D and
the right half displays the map in
Birdview
TM.
INFO:
.
When the split screen mode is selected, the
map settings for the left screen can be
changed independently.
“Setting left screen display”
(page 3-17)
.If the split screen mode is selected, the
normal map scrolling and scale adjustment
are set in the right screen.
.The map direction or scale for each screen
can be adjusted independently by touching
an icon on the map.
IMA0098Split: 2D Map
IMA0099Split: BirdviewTMMap
OTHER SETTINGS
The map view can also be set by perform-
ing the following procedure.
IMA01001. Push .
2. Highlight [Navigation] and push
.
3. Highlight [Map View] and push
.
4. Highlight [Change View] and push
.
Condition: Language=NAM_English/

Black plate (57,1)
[ Edit: 2012/ 11/ 8 Model: 08TJ-N ]
5. Highlight the preferred item and push.
Voice command
1. Push >located on the steering
wheel.
2. After the tone sounds, speak a com- mand.
.To display the 2D map:
“Plan View map” (Alternate Com-
mand Mode)
.To display the BirdviewTMmap:
“Birdview map” (Alternate Command
Mode)
MAP VIEW SETTINGS
Other settings are also available for the
map screen, such as changing the map
direction, map color, Birdview
TMangle, etc.
BASIC OPERATION
IMA01011. Push while the current location
map screen is displayed.
IMA01022. Highlight [Map View] and push
.
IMA01033.Highlight [Map Settings] and push
.
IMA01044. Highlight the preferred item and push
.
Available setting items . [Map Orientation]:
Sets the map direction to North Up or
Heading Up.
“Setting map orientation”
(page 3-14)
3. Map settings
3-13
Condition: Language=NAM_English/

Black plate (58,1)
[ Edit: 2012/ 11/ 8 Model: 08TJ-N ]
3. Map settings
3-14
.[Long Range]:
Sets the long range map view display
on/off.
“Settings long range map view”
(page 3-15)
. [Map Color]:
Changes the map color.
“Setting map color” (page 3-16)
. [Birdview Angle]:
Changes the Birdview
TMangle.
“Changing BirdviewTMangle”
(page 3-16)
. [Left Split Map Settings]:
Sets the map settings for the left screen
of the split map.
“Setting left screen display”
(page 3-17)
. [Show all Freeway Exits on Route]/
[Auto. Show Turn List on Freeway]:
Sets the display of the freeway exit
information on/off.
“Show exit information on free-
ways” (page 5-11)
Other settings
The orientation of the map can also be set
by performing the following procedure.
IMA01051. Push .
2. Highlight [Navigation] and push
.
3. Highlight [Map View] and push
.
SETTING MAP ORIENTATION
The map direction (orientation) can also be
changed in the 2D map. These settings are
available only in the 2D map or 2D/2D split
map.
IMA01061. Highlight [Map Orientation] and push
.
IMA01072. Highlight the preferred map orientation
and push . The indicator of the
selected map orientation illuminates.
3. Push

Black plate (59,1)
[ Edit: 2012/ 11/ 8 Model: 08TJ-N ]
on the map.
. [Heading Up]:
The vehicle icon always points up on
the screen and the map rotates.
INFO:
If the map orientation is switched, the direction
indicator icon displayed in the lower left corner
is also switched.
: North Up
: Heading Up
IMA0108North Up
IMA0109Heading Up
INFO:
The direction of the map can also be changed by
touching the direction icon on the map screen.
Voice command
1. Push >located on the steering
wheel.
2. After the tone sounds, speak a com- mand.
To change the map direction:
“North Up” (Alternate Command Mode)
“Heading Up” (Alternate Command
Mode)
SETTINGS LONG RANGE MAP VIEW
The position of the vehicle icon can be
changed to view a wider area in the
traveling direction. If this function is
activated, the vehicle icon is located
slightly lower than the center of the screen.
IMA01101. Highlight [Long Range] and push
. The indicator illuminates.
2. Push

Black plate (60,1)
[ Edit: 2012/ 11/ 8 Model: 08TJ-N ]
3. Map settings
3-16
INFO:
[Long Range] is displayed only when [Heading
Up] is selected.
SETTING MAP COLOR
The map color can be changed to a warm or
cool color, or a light color, to emphasize
the traffic information.
IMA01121.Highlight [Map Color] and push
.
IMA0113
2. Highlight the preferred map color and
push . The indicator light of the
selected color illuminates.
Available map colors
The following map colors are available. . [Warm]:
Sets warm colors for the map coloring.
. [Cool]:
Sets cool colors for the map coloring.
. [Traffic Emphasis]:
Sets light colors for the map coloring to
emphasize the traffic information.
INFO:
The effect of the setting changes can be
confirmed on the preview displayed on the right
side of the screen.
CHANGING BirdviewTMANGLE
The BirdviewTMangle can be changed.
This setting is available only in the Bird-
view
TMmap or 2D/BirdviewTMsplit map.
IMA01141. Highlight [Birdview Angle] and push .
Condition: Language=NAM_English/