2013 INFINITI G CONVERTIBLE transmission

6
first drive features
Seat Belt Guide (Convertible models)
Un
snap the seat belt guide
01 to allow rear seat p
assengers easier access.
B efore fastening the seat belt, ensure the seat belt is



in
serted into the seat belt guide and the snaps are



sec
urely fastened.
When u sing the seat belt guide, do not allow the seat



belt
to twist so that it will retract correctly.
For more information, refer to the “Safety –– Seats, seat belts and supplemental restraint system (section 1)” of your Owner’s Manual.
Automatic Drive Positioner (if so equipped)
Two positions for the driver’s seat, steering column



and outside mirrors can be stored in the automatic




drive positioner memory.
F ollow these procedures to set the memory positions:
• Confirm
the shift

lever is

in the P (PA rk ) position



(aut
omatic transmissions) or the parking brake is applied (manual transmissions).
• Push
the ignition switch to the ON position.
• Adjust


the driver’s

seat, steering column and outside mirrors

to the desired positions

using



the a
djusting switches for each feature.
• Push
the SE
t sw
itch and within 5 seconds, push the memory switch (1 or 2) for at least 1 second.
• The
indicator light

on the memory

switch
y
ou select

will

illuminate for approximately

5 seconds.



• The driver’s

seat, steering column and outside mirror positions

are now set

to
y
our preference.
These memorized positions can also be linked to your INFINITI Intelligent Key™.
For more information, refer to the “Pre-driving checks and adjustments (section 3)” of your Owner’s Manual.
Passenger Rear Seat Entry/Exit
F
or ease in entering and exiting the rear passenger



ar
eas of the vehicle, perform the following steps:



1.

R
elease the front seatbelt guide and seat belt.



(C
onvertible models)



2.

P
ull the seatback lever
01 upward to fold the

fr
ont seatback forward. Make sure that the front



se

atback is completely folded.



3.


T

o slide the front seat forward, firmly push the



se

atback button
02 . The front seat will move forward.
NO

TE: To stop the front seat from sliding, press the
se

atback button
02 again.

T
o return the front seat to its original position:



1.

P
ush or pull the seatback backward until it locks in place.



2.

Pr
ess the seatback button
02 to slide the front seat backward.
For more information, refer to the “Safety –– Seats, seat belts and supplemental restraint system (section 1)” of your Owner’s Manual.
Coupe
Convertible
01
01
02
02
01

7
Outside Mirror Control Switch
To select the right or left side mirror, turn the control
s

witch
01 right or left.
T
o adjust the mirror angle, move the control switch
01 up, down, right or left.
T
o prevent accidentally moving the mirror, turn and



set
the switch to the middle “neutral” position.
For more information, refer to the “Pre-driving checks and adjustments (section 3)” of your Owner’s Manual.
Starting/Stopping the Engine
AUTOMATIC TRANSMISSION (if so equipped)
Depress the brake pedal.
• If


the brake pedal

is

not

depressed, pushing the




ignition sw
itch once enters the ACC mode.
• If


the ignition is

pushed a second time, the
v
ehicle




w
ill enter the ON mode.
Pr
ess the ignition switch StA rt /StOP button to start



the en
gine.
NOTE: It is important to make sure the INFINITI Intelligent Key
™ is with you (that is, in your pocket
or purse).
MANUAL TRANSMISSION (if so equipped)
D epress the brake pedal.
• If


the brake pedal

is

not

depressed, pushing the ignition switch once enters

the ACC mode.
• If


the ignition is

pushed a second time, the
v
ehicle will

enter the ON mode.
Move the shift lever to N (NEU tr AL).
Depress the clutch pedal to the floor.
Pr ess the ignition switch StA rt /StOP button.
TURNING THE ENGINE OFF
F or an automatic transmission, move the shift lever to the P (PA rk ) position, apply the parking



br
ake and push the ignition switch.
For a manual transmission, apply the foot brake, place the vehicle in 1st gear, apply the parking



br
ake and push the ignition switch.
EMERGENC
y
ENGINE
SHUT OFF
To shut off the engine in an emergency situation while driving, perform one of the following procedures:
R apidly push the push-button ignition switch 3 consecutive times in 1.5 seconds, or
Push and hold the push-button ignition switch for more than 2 seconds.
For more information, refer to the “Starting and driving (section 5)” of your Owner’s Manual.
01

14
first drive features
Opening/Closing the Hard Top (Convertible models)
Before opening or closing the retractable hard top, refer to
your Owner ’s Manual for detailed warnings and cautions
regarding hard top operation.
NO
t
E:
t
he trunk area must be absolutely empty or it may
result in damage to the hard top.
Preparing to Lower the
h ard
top
1.


The
vehicle must be on a level surface when



oper
ating the hard top.
2.


M
ake sure that the trunk area is absolutely empty.
3.


P
ull up on the strap to open the trunk room partition.
4.


Sec
ure the partition hooks into holders until they latch.



If
the trunk room partition hooks are not latched in the



ho
lders, the hard top cannot be operated and
the C

h EC k
S
EPA r A
tO
r indicator will illuminate



on the dot
matrix liquid crystal display located



betw
een the tachometer and speedometer.
5.


Sec
urely close the trunk before operating the hard top.
h

ard t
op
Operation


1.
Mo
ve the shift lever to the P (P
A
rk) position



(aut
omatic transmission) or move the shift lever to
the N (N

EU tr AL ) position (manual transmission)



and ap
ply the parking brake.
2.


St
art the engine.
3.


Pr
ess the hard top operating switch, located on the



c
enter console, to OPEN or CLOSE and hold until the



t
op is fully positioned.
4.

The
r
OOF OPEN or r OOF CLOSED indicator will display when the hard top is fully positioned.
For more information, refer to the “Pre-driving checks and adjustments (section 3)” of your Owner’s Manual.

Fuel-Filler Door
The fuel-filler door is located on the passenger’s side of
the vehicle.
Unlock the fuel-filler door using one of the following



oper
ations, then push and release the left side of



the door t
o open.
•

Push the door handle request

switch while carrying




the INF
INITI Intelligent Key
™ with you.
•

Press


the

UNLOC
k
button on the Intelligent Key.
•

Push

the

power

door

lock


switch to the UNLOCK

position.
For more information, refer to the “Pre-driving checks and adjustments (section 3)” of your Owner’s Manual.