6
first drive features
Seat Belt Guide (Convertible models)
Un
snap the seat belt guide
01 to allow rear seat p
assengers easier access.
B efore fastening the seat belt, ensure the seat belt is
in
serted into the seat belt guide and the snaps are
sec
urely fastened.
When u sing the seat belt guide, do not allow the seat
belt
to twist so that it will retract correctly.
For more information, refer to the “Safety –– Seats, seat belts and supplemental restraint system (section 1)” of your Owner’s Manual.
Automatic Drive Positioner (if so equipped)
Two positions for the driver’s seat, steering column
and outside mirrors can be stored in the automatic
drive positioner memory.
F ollow these procedures to set the memory positions:
• Confirm
the shift
lever is
in the P (PA rk ) position
(aut
omatic transmissions) or the parking brake is applied (manual transmissions).
• Push
the ignition switch to the ON position.
• Adjust
the driver’s
seat, steering column and outside mirrors
to the desired positions
using
the a
djusting switches for each feature.
• Push
the SE
t sw
itch and within 5 seconds, push the memory switch (1 or 2) for at least 1 second.
• The
indicator light
on the memory
switch
y
ou select
will
illuminate for approximately
5 seconds.
• The driver’s
seat, steering column and outside mirror positions
are now set
to
y
our preference.
These memorized positions can also be linked to your INFINITI Intelligent Key™.
For more information, refer to the “Pre-driving checks and adjustments (section 3)” of your Owner’s Manual.
Passenger Rear Seat Entry/Exit
F
or ease in entering and exiting the rear passenger
ar
eas of the vehicle, perform the following steps:
1.
R
elease the front seatbelt guide and seat belt.
(C
onvertible models)
2.
P
ull the seatback lever
01 upward to fold the
fr
ont seatback forward. Make sure that the front
se
atback is completely folded.
3.
T
o slide the front seat forward, firmly push the
se
atback button
02 . The front seat will move forward.
NO
TE: To stop the front seat from sliding, press the
se
atback button
02 again.
T
o return the front seat to its original position:
1.
P
ush or pull the seatback backward until it locks in place.
2.
Pr
ess the seatback button
02 to slide the front seat backward.
For more information, refer to the “Safety –– Seats, seat belts and supplemental restraint system (section 1)” of your Owner’s Manual.
Coupe
Convertible
01
01
02
02
01
7
Outside Mirror Control Switch
To select the right or left side mirror, turn the control
s
witch
01 right or left.
T
o adjust the mirror angle, move the control switch
01 up, down, right or left.
T
o prevent accidentally moving the mirror, turn and
set
the switch to the middle “neutral” position.
For more information, refer to the “Pre-driving checks and adjustments (section 3)” of your Owner’s Manual.
Starting/Stopping the Engine
AUTOMATIC TRANSMISSION (if so equipped)
Depress the brake pedal.
• If
the brake pedal
is
not
depressed, pushing the
ignition sw
itch once enters the ACC mode.
• If
the ignition is
pushed a second time, the
v
ehicle
w
ill enter the ON mode.
Pr
ess the ignition switch StA rt /StOP button to start
the en
gine.
NOTE: It is important to make sure the INFINITI Intelligent Key
™ is with you (that is, in your pocket
or purse).
MANUAL TRANSMISSION (if so equipped)
D epress the brake pedal.
• If
the brake pedal
is
not
depressed, pushing the ignition switch once enters
the ACC mode.
• If
the ignition is
pushed a second time, the
v
ehicle will
enter the ON mode.
Move the shift lever to N (NEU tr AL).
Depress the clutch pedal to the floor.
Pr ess the ignition switch StA rt /StOP button.
TURNING THE ENGINE OFF
F or an automatic transmission, move the shift lever to the P (PA rk ) position, apply the parking
br
ake and push the ignition switch.
For a manual transmission, apply the foot brake, place the vehicle in 1st gear, apply the parking
br
ake and push the ignition switch.
EMERGENC
y
ENGINE
SHUT OFF
To shut off the engine in an emergency situation while driving, perform one of the following procedures:
R apidly push the push-button ignition switch 3 consecutive times in 1.5 seconds, or
Push and hold the push-button ignition switch for more than 2 seconds.
For more information, refer to the “Starting and driving (section 5)” of your Owner’s Manual.
01
