2013 INFINITI EX lock

LIMITATION OF WARRANTIES AND OTHER WAR-
RANTY TERMS AND STATE LAW RIGHTS
EXTRA EXPENSES - LIMITATIONS OF DAMAGES
THIS WARRANTY DOES NOT COVER INCIDENTAL OR
CONSEQUENTIAL DAMAGES SUCH AS LOSS OF THE
USE OF THE VEHICLE, INCONVENIENCE OR COM-
MERCIAL LOSS.
ANY IMPLIED WARRANTY OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE SHALL
BE LIMITED TO THE DURATION OF THIS WRITTEN
WARRANTY.
Some states do not allow the exclusion or limitation
of incidental or consequential damages or limita-
tions on how long an implied warranty lasts, so the
above limitations or exclusions may not apply to
you. This warranty gives you specific legal rights,
and you may also have other rights which vary from
statetostate.
Nissan does not authorize any person to create for it
any other warranty, obligation or liability in connec-
tion with this vehicle.
THE WARRANTY BEGINS
The warranty period begins on the date the vehicle is
delivered to the first retail buyer or put into service,
whichever is earlier.
FOR HOW LONG AND WHAT IS COVERED
BASIC COVERAGE
●The basic coverage period is 48 months or 60,000
miles, whichever comes first.
●The warranty covers any repairs needed to correct
defects in materials or workmanship of all parts and
components of each new Infiniti vehicle supplied by
Nissan subject to the exclusions listed under the
heading ”WHAT IS NOT COVERED” or, if the part is
covered by one of the separate coverages described
in the following sections of this warranty, that spe-
cific coverage applies instead of the basic coverage.
POWERTRAIN COVERAGE
●The Powertrain coverage period is 72 months or
70,000 miles, whichever comes first.
●This warranty covers any repairs needed to correct
defects in material or workmanship.
●Powertrain coverage includes components listed be-
low, under the headings Engine, Transmission and
Transaxle, Drivetrain, and Restraint System, supplied
by NISSAN, subject to the exclusions listed under the
heading “WHAT IS NOT COVERED.”
ENGINE - Cylinder heads and block and all internal
parts, rocker covers and oil pan, valve train and front
cover, timing chain and tensioner, oil pump, water
pump and fuel pump, fuel in jectors, intake and ex-
haust manifolds, flywheel, seals and gaskets.
TRANSMISSION AND TRANSAXLE - Case and all
internal parts, torque converter and converter
housing, automatic transm ission control module,
transfer case and all internal parts, seals and gas-
kets, clutch cover and housing, A/T cooler, and
electronic tr ansmission controls.
DRIVETRAIN - Drive shafts, final drive housing and
all internal parts, propeller shafts, universal joints,
bearings, seals and gaskets. RESTRAINT SYSTEM - Air bags and related elec-
tronic control systems.
CORROSION COVERAGE (PERFORATION FROM CORRO-
SION)
Any body sheet metal panel supplied by Nissan found to
have developed perforation (rust-through) due to corro-
sion in normal use is covered for 84 months, regardless
of mileage, except for those items listed under “WHAT IS
NOT COVERED.” No additional rust proofing applica-
tions are required. Perforation is a condition in which
any body sheet metal panel has corroded from one
surface to another.
TOWING COVERAGE
If your vehicle is inoperative due to the failure of a
warranted part during any of the New Vehicle Limited
warranties, inc luding Emission and Seatbelt warranties,
towing service to the nearest authorized Infiniti retailer
is covered.
ADJUSTMENT COVERAGE
Service adjustments not usually associated with the
replacement of parts, such as wheel alignment, are
covered only during the first 12 months or 12,000 miles,
whichever comes first.
REFRIGERANT RECHARGE ONLY COVERAGE
Refrigerant recharge not associated with the repair or
replacement of a warranted part is covered only during
the first 12 months, regardless of the mileage.
(Continued on next page)
2013 NEW VEHICLE LIMITED WARRANTY 5

DON’T OVERLOAD YOUR VEHICLE OR TIRES
Check your vehicle owner’s manual to determine the
load limits. Overloading your vehicle places stress on
your tires and other critical vehicle components. Over-
loading a vehicle can cause poor handling, increased
fuel consumption and may causetire failure. Overload-
ing your tires can result in severe cracking, component
separation or blowout.
Never fit your vehicle with new tires that have less load
capacity than shown on the vehicle tire placard and
remember that optimum rim width is important for
proper tire load distribution and function.
The maximum load capacity stamped on the sidewalls
of P-Metric tires is reduced by 10% when used on a light
truck, utility vehicle or trailer. Never fit P-Metric tires to
light trucks that specify LT-type replacement tires.
DON’T SPIN YOUR TIRES EXCESSIVELY
Avoid excessive tire spinning when your vehicle is stuck in
snow, ice, mud or sand. The centrifugal forces generated
by a free-spinning tire/wheel assembly may cause sud-
den tire explosion resulting in vehicle damage and/or
serious personal injury to you or a bystander. Never ex-
ceed 35 mph/55 km/h, as indicated on your speedom-
eter. Use a gentle backward and forward rocking motion
to free your vehicle for continued driving. Never stand
near or behind a tire spinning at high speeds. For ex-
ample, while attempting to push a vehicle that is stuck or
when an on-the-car spin balance machine is in use.
DO CHECK YOUR TIRES FOR WEAR
Always remove tires from service when they reach two
thirty-seconds of an inch (2/32) remaining tread depth. All new tires have treadwear indicators which appear as
smooth banks in the tread grooves when they wear to
the two thirty-seconds of an inch (2/32) level. Many wet
weather accidents result from skidding on bald or nearly
bald tires. Excessively w
orn tires are also more suscep-
tible to penetrations.
DO CHECK YOUR TIRES FOR DAMAGE
Frequent (at least monthly) inspection of your tires for
signs of damage and their general condition is impor-
tant for safety. If you have any questions, have your tire
retailer inspect them. Impacts, penetrations, cracks,
knots, bulges or air loss always require tire removal and
expert inspection. Never perform a temporary repair or
use an inner tube as a substitute for a proper repair.
Only qualified persons should repair tires.
PROPER TIRE REPAIR
NOTE: Goodyear and Dunlop do not warrant any inspec-
tion or repair process. The repair is entirely the respon-
sibility of the repairer and should be made in accor-
dance with established Rubber Manufacturers
Association (RMA) procedures.
THE CONVENIENCE (TEMPORARY) SPARE
The Convenience (Temporary) Spare is designed, built,
and tested to the high engineering standards set by
North America’s leading car manufacturers and to
Goodyear and Dunlop’s own high standards of quality
control. It is designed to take up a minimum of storage
space and, at the same time, fulfill the function of a
spare tire when needed. The spare is kept in its storage space, fully inflated at 60 psi. To be sure it is always
ready for use, the air pressure should be checked on a
regular basis.
The Convenience (Temporary) Spare can be used in
combination with the original tires on your vehicle. You
can expect a tire tread life of up to 3,000 miles (4,800
kilometers), depending on road conditions and your
driving habits. To conserve tire tread life, return the
spare to the storage area as soon as it is convenient to
have the standard tire repaired or replaced.
The Convenience (Temporary) Spare weighs less than a
standard tire so
it’s easier to handle. It also helps re-
duce the total car weight which contributes to fuel
economy.
The wheels used with the Convenience (Temporary)
Spare are specifically designed for use with high pres-
sure spares and should never be used with any other
type tire.
DON’T ATTEMPT TO MOUNT YOUR OWN TIRES
Serious injury or Death may result from explosion of
tire/ rim assembly due to improper mounting proce-
dures. Follow tire manufacturer’s instructions and
match tire diameter to rim diameter. Mount light truck
radials on rims approved for radial service. Do not apply
bead sealer. This can inhibit bead seating. Lubricate
beads and tire rim (including tube or flap) contact sur-
faces. Lock assembly on mounting machine or place in
safety cage. STAND BACK and never exceed 40 psi to
seat beads. Never use a volatile substance or a rubber
“donut” (also known as a bead expander or “O-Ring”) to
aid bead seating. Only specially-trained persons should
mount tires.
(Continued on next page)
28 GOODYEAR/DUNLOP TIRE LIMITED WARRANTY

HAZARDS
Objects in the road that threaten a tire should be safely
avoided. These objects arepotholes, glass,metal,
rocks, wood debris and the like. Unavoidable contact
should prompt a thorough tire inspection.
You may not always recall hitting an object that can
damage or injure your tires. If while driving your vehicle
experiences any unusual vibrations, ride disturbance or
noise and/or you suspect that possible damage to the
tires or vehicle has occurred, DO NOT JAM OR LOCK YOUR
BRAKES! Rather reduce your speed and drive with cau-
tion until you can safely pull off the road. Stop and
inspect the tires. If the tire is underinflated or damaged,
deflate, remove the tire and rim assembly and replace it
with your spare. If you cannot detect a cause, have the
vehicle towed to the nearest vehicle or tire retailer to
have the vehicle inspected.
REPAIRING, MOUNTING AND DEMOUNTING
OF TIRES
Do not attempt to repair, mount or demount a tire your-
self. Tire changing can be dangerous and must be done
by professionally trained persons using proper tools
and procedures as specified by the Rubber Manufactur-
ers Association (RMA). Follow these mounting recom-
mendations. Your tires should be mounted on wheels of
correct size and type and which are in good, clean con-
dition. Bent, chipped or rusted wheels may cause tire
damage. The inside of the tire must be free from foreign
materials. Have your retailer check the wheels before
mounting new tires. Mismatched tires and rims can
explode during mounting. Also, mismatched tires and
rims can result in dangerous tire failure on the road. If a tire is mounted by error on the wrong-sized rim, do not
remount it on the proper rim - scrap it. It may be dam-
aged internal
ly (which is not extern ally visible) by being
dangerously stretched and could fail on the highway.
Old valves may leak. When new tubeless tires are
mounted, have new valves of the correct type installed.
Tubeless tires must be mounted only on wheels de-
signed for tubeless tires, i.e., wheels which have safety
humps or ledges.
Never perform a temporary repair, use an innertube or
inject sealant as a permanent substitute for a proper
repair. Only qualified persons should repair tires.
Be sure that all your valves have suitable valve caps.
This will keep valve cores clean and clear and guard
against leakage.
REPAIRS - WHENEVER POSSIBLE, SEE A TIRE RETAILER
AT ONCE. Some tire manufacturers do not warrant any
inspection or repair process. The repair is entirely the
responsibility of the repairer. Punctures in the tread of a
passenger tire which do not exceed 1/4 of an inch
(6mm) in diameter can usually be repaired by following
the Rubber Manuf acturer’s Association (RMA)Passen-
ger and Light Truck Repair procedures. Contact the
manufacturer of your tires for it s position and assistance
as to the acceptable location for a proper repair and the
repair of speed rated tires. Do not use plug repairs. They
may cause further damage to the tire. They are not
always air tight and the plug may fail. Do not exceed
posted speed limits on any repaired tire. Certain tire
manufacturers speed ratings are voided if the tire is
repaired. Although a tire was properly repaired, internal structural
damage resulting from the puncture may have occurred.
Sometime later the damage may cause the tire to be
removed from service.
If the tire has a puncture in the tread which exceeds 1/4
inch (6mm), the tire must be replaced. If any tire has
sustained a puncture, have the tire inspected internally
by a tire retailer for possible damage that may have
occurred.
Improper mounting and inflation procedures can cause
an explosion of the tire/rim assembly. Only specially
trained persons should perform these tasks. Contact
your tire store or retailer for assistance.
CAUTION - Never, under any c
ircumstance, introduce a
flammable substance into a tire.
WHEEL ALIGNMENT AND BALANCING
Wheel alignment and balancing are important for safety
and maximum mileage from your tires. Check how your
tires are wearing at least once a month. If your tires are
wearing unevenly, such as the inside shoulder of the tire
wearing faster than the rest of the tread, or if you detect
excessive vibration, your vehicle may be out of align-
ment or balance. These conditions not only shorten the
life of your tires, but adversely affect the handling char-
acteristics of your vehicle which could be dangerous. If
you detect irregular wear or vibration, have your align-
ment and balance checked immediately. Tires which
have been run underinflated will show more wear on the
shoulders than in the center of the tread.
(Continued on next page)* Provided by and published at the request of the tire manufacturers/warrantors.
IMPORTANT TIRE SAFETY INFORMATION147

ROADSIDE ASSISTANCE
As part of theInfiniti Total Ownership Experience ,
Roadside Assist ance is available to you, 24 hours a day,
365 days a year, for emer gency roadsideassistance
should the need arise for any of the following items:
●Mechanical Breakdown
●Flat Tire
●Dead Battery
●Accident/Collision (One-way tow – loaner vehicle not
included)
●Out of Gas
●Lock-out service
All Roadside Assist ance services are provided exclu-
sively by Cross-Country Motor Club, Inc., Boston, Mas-
sachusetts 02155, except in Alaska, California, Oregon,
Wisconsin and Wyoming, where services are provided
by Cross-Country Motor Club of California, Inc., Boston,
Massachusetts 02155.
COVERAGE
Roadside Assistance is provided for all Infiniti vehicles
from the date the vehicle is delivered to the first retail
buyer or otherwise put into use, whichever is earlier, for
a period of 48 months, without regard to mileage.
Roadside Assistance is avail able to anyoneoperating the
Infiniti vehicle with the authorization of the owner. [For
purpose of Roads ide Assistance benefits, “owner” in-
cludes the lessee of a leased vehicle.] These services are
transferable with the resale of the vehicle for the time
remaining on the original Infiniti new vehicle limited war-
ranty coverage period. Roadside Assistance is available
throughout the Continental United States and Canada.
HOW TO USE ROADSIDE ASSISTANCE
Should one of the disablements listed above occur,
simply call the toll free number, 1-800-662-6200, and
advise the Roadside Assistance Representative of your
name, the vehicle identification number (VIN) of your
car, your location, and the nature of the problem. (When
travelling in Canada call 1-800-835-0221.) The VIN can
be found imprinted on a plate affixed to the upper
dashboard on the driver’s side of your Infiniti. The VIN is
also printed on the permanent Infiniti Total Ownership
 Program card which will be sent to you approximately
6 weeks after purchase of your new Infiniti.
ON-SITE AND TOWING SERVICE
Depending on the type of vehicle problem you are expe-
riencing, the R oadside Assistance Represent ative will
determine the appropriate roadside assistance and/or
flatbed (towing) service to be dispatched. In most
cases, minor disablement services such as flat tire
change, lock-out service, out-of-gas delivery, battery
boost, etc., can be performed onsite so that you can be
on the road again as soon as possible. There is no
charge for the dispatch of onsite or towing service. Any
charges for the replacement of keys, gas or non-
warranty items will be your responsibility at the time of
the repair or service.
Whenever possible, flatbed (towing) service will be dis-
patched for mechanical disablements or accident/ col-
lisions which render the vehicle inoperative. There is no
charge for the towing service. Roadside Assistance will
arrange to transport the vehicle to the nearest Infiniti
retailer, if one is located within 250 miles, or to another
authorized alternate service facility. Warranty covered
repairs will be provided for under the terms of the appli- cable express Infiniti limited warranty. However, any
nonwarranty or accident/collision repairs will be your
responsibility.
NOTE:
You may be required to sign a receipt at the time of
disablement to acknowledge receipt of the Roadside
Assistanc
e service rendered.
EXCLUSIONS
Roadside Assistance is not a warrantyand is not pro-
vided under any Infiniti or Nissan warranty, butisa
service which is provided to you as part of the Infiniti
Total Ownership Experience to minimize any unfore-
seen vehicle operation inconvenience. Potential liabil-
ity is expressly limited to the cost of the listed benefits
and does not extend to incidental or consequential
damages such as loss of use inconvenience, loss of pay,
or commercial loss.
Roadside Assistance benefits exclude any costs related
to repairs, parts replacement, labor, etc. which are in-
curred as a result of accident/ collision, vehicle abuse,
racing, vandalism or other items not covered by the
Infiniti New Vehicle Limited Warranty. Also excluded are
services for snow tires, repair to studs, mounting or
demounting of snow chains, and any fines, fees or taxes
which are associated with impound towing as a result of
actual or alleged violation of any laws or regulations.
(Continued on next page)
50 INFINITI TOTAL OWNERSHIP EXPERIENCE BENEFITS