2013 HONDA INSIGHT display

To use the system, your cell phone
and the HFL system must be linked.
Not all cell phones are compatible
with this system. Refer topage 225
for instructions on how to link
your cell phone to HFL and how to
receive or make phone calls, or visit
the handsfreelink.com website. In
Canada, visit , or
call (888) 528-7876.
You can receive or make phone calls
f rom your cell phone through your
vehicle’s
HandsFreeLink
(HFL) system without touching your
cell phone.
www.handsfree link.ca
Bluetooth
Bluet oot h
HandsFreeL ink
Multi-Inf ormation Display
87
12/07/13 16:48:16 31TM8630_092
Inst rument s and Cont rolsTOC
2013 Insight

ÛÝÛÝ
ÛÝ
If there is a problem with your
vehicle, f or example the engine oil
level is low or a door is not f ully
closed, the multi-inf ormation display
will show you the problem. It does
this by interrupting the current
display with one or more messages. The system message(s) triggers the
appropriate indicator(s) on the
instrument panel, including the
system message indicator, to come
on. The system message indicator
does not go of f until the problem(s)
is corrected.
You will also hear a beep when the
system message comes on f or the
first time.
Most of the messages are displayed
f or about 5 seconds, and then the
normal display returns. If there are
several system messages to be
shown, the display switches these
messages every 5 seconds.
To switch the message(s) bef ore 5
seconds have elapsed, press the
INFO( / )buttononthesteering
wheel.
Even if you press the INFO ( / )
button, some messages stay on or
come on again at regular intervals
until the problem is corrected.
If the system message indicator
remains lit on the instrument panel,
you can see the corresponding
message(s) again by pressing the
INFO ( / ) button repeatedly.
System Messages
Multi-Inf ormation Display
88
SYSTEM MESSAGE INDICATOR
12/07/13 16:48:24 31TM8630_093
Inst rument s and Cont rolsTOC
A list of all messages begins on the
next page:
2013 Insight

CONT INUED
See page12
See page 13
See page 13
See page 21
See page 21
See page 34 See page
34
See page 64 See page66
See page
151
See page 319 See page
366
See page 365
See page 364
See page 287
See page 363
Multi-Inf ormation Display
89
U.S.U.S.
Canada
Canada
12/07/13 16:48:38 31TM8630_094
Inst rument s and Cont rolsTOC
2013 Insight

See page68
See page80
See page
70
See page 131
See page 131
See page 132 See page
123
See page 293
See page 289
See page 290
See page 360
See page 271 See page
317 See page
300
See page 301
See page 302
See page 247
Multi-Inf ormation Display
90
U.S.
only
U.S.
only
Canada
only
12/07/13 16:48:51 31TM8630_095
Inst rument s and Cont rolsTOC
2013 Insight

ÛÝ
You can customize some vehicle
control settings. To enter the
customizing mode, press and hold
either INFO button ( / ) for more
than 3 seconds. To change the
settings, the ignition switch must be
in the ON (II) position, and the
vehicle must be stopped with the
transmission in Park. If you turn the ignition switch to the
ACCESSORY (I) or the LOCK (0)
position, or move the shif t lever out
of Park, the display will change to
the normal screen.
If you try to enter the customizing
mode while the vehicle is moving,
you will see a ‘‘MUST STOP AND
SHIFTTOPARKTOCHANGE
SETTINGS’’ message and you
cannot change the settings.
If you want to change any vehicle
control settings, select CHG
SETTING, then press the SEL/
RESET button.
Refer to the table on the following
pages about the settings you want
to customize.
CONT INUED
Customized Settings
Multi-Inf ormation Display
91
12/07/13 16:48:58 31TM8630_096
Inst rument s and Cont rolsTOC
2013 Insight

ÎÎÎ
Î Î
Î
Î Î
Î
µ™¶ ™
µ™¶ ™
Î
Group Setup Menu Item Description Page
Setting Option
MET ER SET UP
(P.96)
LIGHTING SETUP
(P.104) LANGUAGE SELECT ION
ADJUST OUTSIDE TEMP.
DISPLAY
TRIP A RESET with
REFUEL
ELAPSED TIME RESET
DISPLAY KM/MILES
METER COLOR CHANGE
INTERIOR LIGHT
DIMMING T IME
AUTO LIGHT
SENSITIVITY Changes the language used in the display.
Changes the outside temperature reading above or
below its current reading.
Causes trip meter A and the average fuel economy
to reset when you refuel.
Resets the elapsed time of your current trip.
Changes the displayed measurement on the multi-
information display.
Turn the ambient meter feature on or off.
Changes how long (in seconds) the interior lights
stay on after you close the doors.
Changes the timing of when the headlights come
on. The headlight switch needs to be in the AUTO
position. 97
98
99
100
101
103
105
106
ENGLISH
FRENCH
SPANISH
5°F 0°F 5°F
(U.S.) 3°C 0°C 3°C
(Canada)
ON
OFF
IGN OFF
TRIP A
AUTO
KM
MILES
ON
OFF
60sec
30sec
MAX
HIGH
MID TRIP B
15sec
LOW
MIN
Default setting
:
Multi-Inf ormation Display
92
12/07/13 16:49:03 31TM8630_097
Inst rument s and Cont rolsTOC
2013 Insight

Î
Î
Î
Î
Î
Î
Î
Description
Menu Item
Group Setup Page
Setting Option
Changes when the doors automatically lock.
Changes when the doors automatically unlock.
Changes which doors unlock with the remote
transmitter in a first push.
The exterior lights flash each time you press the
LOCK or UNLOCK button. A beeper will also
sound when you press the LOCK button twice.
Changes how long it takes (in seconds) for the
doors to relock and the security system to set after
you unlock but do not open the door.
Set/Cancel all the customized settings as default.
AUTO DOOR LOCK
AUTO DOOR UNLOCK
DOOR LOCK MODE
KEYLESS LOCK
ACKNOWLEDGMENT
SECURITY RELOCK
TIMER
DOOR SETUP
(P.108)
DEFAULT ALL
(P.117) 109
110
112
114
115
117
SHIFT FROM P
WITH VEH SPD
OFF
IGN OFF
OFF
DRIVER DOOR
ALL DOORS
ON
OFF
90sec
60sec
30sec
SET
CANCEL
Default setting
:
DRIVER DOOR /
AL L DOORS
SHIFT TO P
Multi-Inf ormation Display
93
12/07/13 16:49:09 31TM8630_098
Inst rument s and Cont rolsTOC
2013 Insight

ÛÝÛ
Ý
ÛÝ
You can customize some of the
vehicle control settings to your
pref erence. Here are the settings
you can customize:
METER SETUP
When you want to change the
vehicle control settings, press the
INFO ( / ) button to select CHG
SETTING, then press the SEL/
RESET button. Each time you press the INFO ( /
) button, the screen changes as
shownonthenextpage.Pressthe
INFO ( / ) button until you see
the setup you want to customize,
then press the SEL/RESET button
to enter your selection.
If you do not make any changes,
select ‘‘EXIT.’’ The display returns to
the normal display.
You can also use the select/reset
knob in the instrument panel. Turn
the knob to select a setting and press
it to enter your selection.
If you want the settings as they were
when the vehicle lef t the f actory,
select DEFAULT ALL, as described
on page .
LIGHTING SETUP
DOOR SETUP
117
Customize Settings
Multi-Inf ormation Display
94
12/07/13 16:49:17 31TM8630_099
Inst rument s and Cont rolsTOC
2013 Insight