2013 FORD TRANSIT CONNECT headlamp

[x] Cancel search: headlamp

Page 194 of 321

FORD TRANSIT CONNECT 2013 1.G Owners Manual Replacing Front Turn Signal Bulbs
1. Make sure the headlamp control
is in the off position.
2. Open the hood.
3. Remove the bulb socket from
the lamp assembly by turning it
counterclockwise.
4. Pull t

Page 195 of 321

FORD TRANSIT CONNECT 2013 1.G Owners Manual Replacing Front Side Marker Bulbs
1. Make sure the headlamp control
is in the off position.
2. Remove the side marker lamp
assembly by gently prying the lamp
assembly away from the vehicle.
3. Remove

Page 196 of 321

FORD TRANSIT CONNECT 2013 1.G Owners Manual Replacing side repeater bulbs
1. Make sure the headlamp control
is in the off position.
2. Remove the side repeater by
prying it out from the bottom.
3. Hold the bulb holder and turn it
counterclockwi

Page 198 of 321

FORD TRANSIT CONNECT 2013 1.G Owners Manual Replacing Rear Side Marker Bulbs
1. Make sure the headlamp control
is in the off position.
2. Open the cargo door.
3. Remove the side marker by
gently prying the lamp assembly
away from the vehicle.
4

Page 199 of 321

FORD TRANSIT CONNECT 2013 1.G Owners Manual Replacing License Plate Lamp Bulbs
1. Make sure the headlamp control
is in the off position.
2. Remove the lens assembly.
3. Pull the bulb straight out.
Install in reverse order.
Replacing Front Dome

Page 200 of 321

FORD TRANSIT CONNECT 2013 1.G Owners Manual Replacing Rear Dome Lamp Bulbs
1. Make sure the headlamp switch is
in the off position.
2. Switch off the interior lamps.
3. Pry out the light assembly with a
flat screwdriver.
4. Remove the rear dome

Page 201 of 321

FORD TRANSIT CONNECT 2013 1.G Owners Manual BULB SPECIFICATION CHART
Replacement bulbs are specified in the chart below. Headlamp bulbs
must be marked with an authorized “D.O.T.” for North America to
ensure lamp performance, light brightnes

Page 318 of 321

FORD TRANSIT CONNECT 2013 1.G Owners Manual Engine compartment -
opening ......................................175
Engine oil
checking and adding ......176–177
dipstick ....................................176
filter, specifications ..........
Page:   < prev 1-8 9-16 17-24 25-32 next >