2013 FORD POLICE INTERCEPTOR UTILITY headlamp

[x] Cancel search: headlamp

Page 238 of 375

FORD POLICE INTERCEPTOR UTILITY 2013 1.G Owners Manual Replacing stop/tail/turn and sidemarker lamp bulbs (Sedan)
1. Make sure the headlamp switch is in the off position and open the
trunk.
2. Remove the press pin and cargo net
fastener (if equipped) and

Page 239 of 375

FORD POLICE INTERCEPTOR UTILITY 2013 1.G Owners Manual Replacing backup lamp bulbs (Sedan)
1. Make sure the headlamp switch is in the off position.
2. Remove the deck lid trim panel press pins
and carefully pull the panel away to expose
the backside of th

Page 240 of 375

FORD POLICE INTERCEPTOR UTILITY 2013 1.G Owners Manual Replacing license plate lamp bulbs (Sedan)
1. Make sure the headlamp switch is in the off position.
2. Remove the two screws from the
license plate lamp assembly.
3. Carefully pull the bulb out from
t

Page 242 of 375

FORD POLICE INTERCEPTOR UTILITY 2013 1.G Owners Manual BULB SPECIFICATION CHART
Replacement bulbs are specified in the chart below. Headlamp bulbs must
be marked with an authorized “D.O.T.” for North America and an “E” for
Europe to ensure lamp pe

Page 371 of 375

FORD POLICE INTERCEPTOR UTILITY 2013 1.G Owners Manual coolant .....................................218
fail-safe cooling .......................222
idle speed control ...................226
lubrication specifications .......288
refill capacities ........

Page 372 of 375

FORD POLICE INTERCEPTOR UTILITY 2013 1.G Owners Manual Instrument panel
cleaning ...................................247
cluster ........................................92
J
Jack ............................................278
positioning .................
Page:   < prev 1-8 9-16 17-24