funcTiOn
Rearview Camera*
Provides a visual
display of the
area behind
the vehicle.
The display
automatically
appears in the
touch screen when the vehicle is in
R (Reverse) and uses green, yellow
and red guides to alert you of your
proximity to objects.
Integrated Blind
Spot Mirrors
Designed to
assist you by
increasing the
visibility along
the side of
your vehicle.
• The integrated convex mirror is built
into the upper outboard corner of
the exterior mirrors.
• As an approaching vehicle moves
toward you, you will see its
reflection first in the main mirror,
and then in the blind spot mirror.
Forward and Reverse
Sensing Systems*
Sounds an audible warning tone if
there is an obstacle near the vehicle’s
front or rear bumpers.
• As the vehicle moves closer to the
obstacle, the rate of the warning
tone increases in frequency.
• The front sensors are automatically
activated when the vehicle is in D
(Drive) and will detect objects up to
27 inches (70 centimeters) away.
• The reverse sensors are activated
automatically when the vehicle is in
R (Reverse), and will detect objects
up to 6 feet (2 meters) away.
• See the Parking Aids chapter in
your Owner’s Manual for complete
information on your vehicle’s
sensing systems.
Note: Visibility aids do not replace
the need to watch where the vehicle is
moving. Refer to your Owner’s Manual
for safety information, more detail
and limitations.
PowerShift
Automatic Transmission*
Delivers the
convenience of an
automatic with the
fuel efficiency and
sporty feel of a manual
transmission. The
dual-clutch design
helps provide immediate response
during acceleration for smooth,
seamless shifts.
SelectShift®
Automatic Transmission*
Gives you the ability to
manually change gears
if you’d like. To use:
• Move the gearshift
lever from D (Drive)
to S (Sport).
• Activate SelectShift by using the +
/ - thumb toggle located on the side
of your gearshift lever to manually
make shifts.
• Press the (+) button to upshift.
Press the (-) button to downshift.
14
2013 focus
15
cOmfOrT
Tilting Head Restraints
Your vehicle’s front-row head restraints can be adjusted.
To raise: Pull up on the
head restraint.
To lower: Press the head
restraint down while pressing
and holding the guide sleeve
adjust/release button.
To tilt the head restraint: Gently pull the top of the head
restraint forward.
To return it to its upright position: Tilt it forward once
more and release.
Note: Do not attempt to force the headrest backward after it
is tilted. Instead, continue tilting it forward until the headrest
releases to the upright position.
Heated front Seats*
The heated front seat controls are located on the center
console near the gearshift lever.
To use, simply:
• Adjust the dial to the desired
heat setting.
• Choose from 0 – 5 (off-high).
Front-Seat Adjusters
Height/Recline Adjustment
Lift the control to adjust the height
of the seat. Lift the control to adjust the angle
of the seat back.
Seat back
Recline Control
Dual Climate Controls*
With the dual climate controls,
you have the flexibility to operate
the temperature with one control,
called mono mode, or two, where
both driver and front passenger can
select independent temperatures
using their own rotary dials.
To operate the dual temperature control: Use the rotary
control on the passenger’s side. Mono mode automatically
shuts off.
To return back to mono mode: Press and hold the AUTO
button. The passenger’s side temperature automatically
adjusts to the driver’s side temperature setting, and both
sides will then remain linked to the driver’s control.
2013 focus
*if equipped*if equipped
Height
Adjustment
Control
