1
3
4
5
6
7
2
InstrumentPanel1
2
3
4
5
6
7
8
7
* if equippedCRUISE ContRoLS
To set your cruise control speed:
1. Press the on control and release.
2. Accelerate to the desired speed.
3. Press the Set+ control and release, then take your
foot off the accelerator.
After your speed has been set, you can press Set
+/- to adjust cruise speed. To disable, press the
oFF control.
INFORMATION DiSPLA yS
Provides specific information about various
systems on your vehicle including the status of your
high-voltage battery and the other unique features
of your electric vehicle.
Use the left-hand, 5-way controls located on the
steering wheel to choose and confirm settings and
messages. Refer to the Instrument Cluster chapter of
your Owner’s Manual for more information.
SERVICE VEhICLE S OON LiGht
Illuminates when a powertrain or high-voltage
charge system fault has been detected. If the
indicator stays on or continues to come on, contact
your authorized dealer as soon as possible.
TILT /TELESCOPE S TEERINg CoLuMn
Unlock the steering wheel by pulling the lever down.
Adjust the steering wheel to the desired position.
Push the lever up to lock the steering wheel in place .
INFOTAINMENT DiSPLAy
Displays information about Entertainment, Phone,
Navigation and Surplus. Use the right hand 5-way
controls located on your steering wheel to scroll
through, highlight and make minor adjustments
within a selected menu. Refer to the MyFord Touch
®
chapter in your Owner’s Manual for more information.
MEDIA S TEERINg WhEEL ContR oLS
: Press to increase (+) or decrease (-) volume levels. : Pull toward you to access voice recognition. : Press to answer an incoming phone call. : Press to end a phone call and exit phone mode .
PUSh BUTTON St ARt- ReAD y to DRiVe
note: Your intelligent access key must be inside the vehicle to
put the vehicle in accessory mode or “Ready to Drive” .
Allows you to go into “Ready to Drive” mode by
pressing the P oWeR S tAR t/S toP button while
fully pressing down on the brake pedal. A green
“Ready to Drive” indicator light
will appear in
the instrument cluster after you start the vehicle.
This lets you know that the vehicle is turned on and
ready for driving. Press the P oWeR S tAR t/S toP
button again to turn the vehicle off .
hAzARD ContR oL-unL oCk /L OCk
8
6
