++
adaPtive
cR uiSe contR oL*
Allows you to set a ‘gap distance’
between yourself and the vehicle in
front of you during highway driving.
When your cruise control is active
press GAP up or down to select the
gap distance. Refer to the Cruise
Control chapter of your Owner’s
Manual for more information.
note: Driving aids do not replace
the need to watch where the vehicle
is moving and brake where necessary.
Refer to your Owner’s Manual for
safety information, more details
and limitations.
3. inF oRMation diSPLay S*Provides information about various
systems on your vehicle. Use the
left-hand, 5-way controls located
on the steering wheel to choose
and confirm settings and messages.
Refer to the Information Displays
chapter in your Owner’s Manual for
more information.
4. SeR vice engine
S oon Light
Illuminates briefly when the
ignition is turned on. If it remains
on or is blinking after the engine is
started, the on-board diagnostics
system (OBD-II) has detected a
malfunction. Drive in a moderate
fashion and contact your authorized
dealer as soon as possible.
5. inF otainMent diSPLay* Displays information about
Entertainment, Phone, Navigation
and Climate. Use the right-hand
5-way controls located on your
steering wheel to scroll through,
highlight and make minor
adjustments within a selected
menu. Refer to the MyFord Touch™
chapter in your Owner’s Manual
for more information.
6. SteeRing wheeL
audio contR oLS*
Press VOL +/- to increase/decrease
volume levels. Press SEEK ∏ / π
to access the next/previous radio
station preset, CD track or preset
satellite radio channel*.
Press to access SYNC ®
phone features.
Press to access
voice recognition.
7. Pu Sh button S taRt*Allows you to start your vehicle by
pressing the ENGINE START/STOP
button while fully pressing down on
the brake pedal. Press the button
again to turn the engine off.
note: Your intelligent access key*
must be inside the vehicle for the
ignition to start.
8. hazaRd contR oL
5
Sync®sYnc is a hands-free, voice recognition system used for entertainment,
information and communication. s Ync…say the word.
6
getting started with YO ur
s Ync s Ystem
before you get started: 1) Set up your owner account at syncmyride.com. Register by
following the on-screen instructions. After registering you
can see what complimentary services you are eligible for.
2) SYNC uses a wireless connection called Bluetooth
® to
communicate with your phone. Turn Bluetooth mode
on in your phone’s menu options. This lets your phone
find SYNC. If you need more details on setting up your
phone with SYNC, visit syncmyride.com, or your phone
manufacturer’s website.
Pairing your phone with S ync In order to use many of the features of SYNC, such as making
a phone call, receiving a text or using SYNC services, you must
first connect or pair your phone with SYNC.
to pair your phone for the
first time:
1) Make sure that your vehicle is in (P) park and turn your
ignition and radio on.
2) Press the phone button
, when the display indicates
No Phone Found press OK.
3) When Add Bluetooth Device? appears in the display
press OK.
4) When Find SYNC appears in the display press OK. When
prompted on your phone’s display, enter the PIN provided
by SYNC into your phone.
5) The display will indicate when the pairing is successful.
note: The system may prompt you to:
• set your phone as the primary/favorite (the primary phone
will receive messages and voice mails).
• download your phone book (this is recommended to use
voice commands).
• turn on 911 Assist™.
tiPS
• To pair subsequent phones, please refer to Pairing
Subsequent Phones in the SYNC chapter of your
Owner’s Manual.
• If you are experiencing pairing problems, try performing
a clean pairing by deleting your services from SYNC and
deleting the SYNC connection from your phone, and then
repeat the process.
• Make sure that there are no security features active on your
phone preventing you from connecting to SYNC.
cOmmOnLY used v Oice cOmmands-
S ync S ay the woRd
Every time you want to give SYNC a voice command you must
first press the voice button and when prompted, speak your
voice command. For a list of voice commands say “What can I say?”
tiPS • Make sure the interior of the vehicle is as quiet as possible.
• After pressing the voice button , wait until after the tone
sounds and “Listening” appears in your vehicle’s display
before saying a command. Any command spoken prior to
this does not register with the system.
• Speak naturally, without long pauses between words.
