2013 FORD EXPEDITION garage door opener

Reprogramming a single button
To program a device to a previously trained button, follow these steps:
1. Press and hold the desired button.Do NOTrelease the button.
2. The indicator light will begin to flash after 20 seconds. Without
releasing the button, follow Step 1 in theProgrammingsection.
For questions or comments, contact HomeLinkat www.homelink.com or
1-800-355-3515.
Programming HomeLinkto a Genie Intellicode2 garage door
opener
Note:The Genie Intellicode2 transmitter must already be programmed
to operate with the garage door opener.
Programing the transmitters
To program HomeLinkto the transmitter you must first put the
transmitter into programming mode. To do this
A. Red LED
B. Green LED
1. Press and hold one of the buttons on the hand-held transmitter for
10 seconds. The LED light will change from green to green and red.
2. Press the same button twice to confirm the change to Programming
mode. If done properly the LED light will appear red.
3. Hold the transmitter within 1–3 inches (2–8 centimeters) of the
button on the sun visor you want to program.
4. Press and hold both the programmed Genie button on the hand-held
transmitter and the button on the sun visor you want to program. The
indicator light on the sun visor will flash rapidly when the programming
is successful.
BA
186Universal Garage Door Opener (If Equipped)
2013 Expedition(exd)
Owners Guide gf, 1st Printing
USA(fus)

Note:the Genie transmitter will transmit for up to 30 seconds. If
HomeLinkdoes not program within 30 seconds the Genie transmitter
will need to be pressed again. If the Genie transmitter LED displays
green and red, release the button until the LED turns off before pressing
the button again.
Once HomeLinkhas been programmed successfully, the Genie
transmitter must be changed out of program mode. To do this:
1. Press and hold the previously programmed Genie button on the
hand-held transmitter for 10 seconds. The indicator light will change
from red to red and green.
2. Press the same button twice to confirm the change. If done correctly
the LED will turn green.
Programming HomeLinkto the Genie Intellicodegarage door
opener motor
Note:You may need a ladder to access the garage door opener motor.
To program HomeLinkto the
garage door opener motor.
1. Press and hold the PROGRAM
button on the garage door opener
motor until both blue LED’s turn on.
2. Release the PROGRAM button.
Only the smaller round LED should
be on.
3. Press and release the program button. The larger purple LED will
flash
Note:The next two steps must be completed in 30 seconds.
4. Press and release the Genie Intellicode 2 hand-held transmitter’s
previously programmed button. Both indicator lights on the garage door
opener motor unit should now flash purple.
5. Press and hold the previously programmed button on the sun visor for
2 seconds. Repeat this step up to 3 times until the garage door moves.
Programming is now complete.
At this point, programming is complete.
Universal Garage Door Opener (If Equipped)187
2013 Expedition(exd)
Owners Guide gf, 1st Printing
USA(fus)

Clearing a HomeLinkdevice
To erase programming from the three HomeLinkbuttons, press and
hold the two outer HomeLinkbuttons until the indicator light begins to
flash. The LED will begin flashing in 10 to 20 seconds, at which time
both buttons should be released. Programming has now been erased, and
the led should blink slowly to indicate the device is in train mode when
any of the three HomeLink buttons are pressed.
FCC and RSS-210 Industry Canada Compliance
This device complies with Part 15 of the FCC Rules and with RSS-210 of
Industry Canada. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may
cause undesired operation.
Changes or modifications to your device not expressly approved by the
party responsible for compliance can void the user’s authority to operate
the equipment.
188Universal Garage Door Opener (If Equipped)
2013 Expedition(exd)
Owners Guide gf, 1st Printing
USA(fus)

Fuses ..........................281–282, 286
G
Garage door opener ..........179, 183
Gas cap (see Fuel cap) ............203
Gauges .........................................94
H
Hazard flashers .........................269
HD Radio™ ...............................444
Headlamps ...................................82
aiming ......................................306
autolamp system .......................83
bulb specifications ..................312
checking alignment ................306
flash to pass ..............................82
high beam .................................82
replacing bulbs .......................308
turning on and off ....................82
Head restraints .........................159
Heating ..............146, 148, 150, 152
Homelink wireless control
system ........................................183
Hood ..........................................291
I
Ignition ...............................195, 355
Illuminated visor mirror .............92
Information displays .................101
Inspection/maintenance (I/M)
testing ........................................208
Instrument panel
cleaning ...................................317
cluster ........................................95
lighting up panel and interior...83J
Jack ............................................346
positioning ...............................346
storage .....................................346
Joining two calls
(multiparty/conference call) ....394
Jukebox features .......................457
Jump-starting your vehicle ......270
K
Keyless entry system
autolock .....................................64
keypad .......................................71
locking and unlocking doors ....72
programming entry code .........71
Keys .......................................53, 74
positions of the ignition .........195
L
Lamps ..........................................82
autolamp system .......................83
bulb replacement
specifications chart ................312
fog lamps ...................................84
headlamps .................................82
headlamps, flash to pass ..........82
instrument panel, dimming .....83
interior lamps ...........................85
replacing bulbs ...............308, 311
Lane change indicator
(see Turn signal) ........................84
LATCH anchors ...........................27
Liftgate ............................63, 66–67
Lights, warning and indicator ....95
Loading instructions .................247
Loading pictures .......................434
Index493
2013 Expedition(exd)
Owners Guide gf, 1st Printing
USA(fus)

Troubleshooting ................142, 472
Turn signal ..................................84
U
Universal garage door opener ..179
USB port ....................................124
Using privacy mode ..................394
V
Vehicle health report ................407
Vehicle Identification Number
(VIN) ..........................................361
Vehicle loading ..........................241
Ventilating your vehicle ...........197
Voice commands in media
mode ..........................................414Voice commands in phone
mode ..........................................391
Voice recognition ......................436
W
Warning lights (see Lights) .......95
Washer fluid ......................299–300
Water, Driving through .............265
Where am I? ..............................460
Windows
power .........................................87
rear wiper/washer .....................81
Windshield washer fluid and
wipers ..........................................80
checking and adding
fluid ..................................299–300
replacing wiper blades ...........302
Wrecker towing .........................262
Index497
2013 Expedition(exd)
Owners Guide gf, 1st Printing
USA(fus)