2013 FORD E SERIES service

[x] Cancel search: service

Page 331 of 416

FORD E SERIES 2013 4.G Owners Manual In the Event of a Crash
Not all crashes deploy an airbag or activate the fuel pump shut-off
(which would activate 911 Assist); however, if 911 Assist is triggered,
SYNC tries to contact emergency serv

Page 332 of 416

FORD E SERIES 2013 4.G Owners Manual Vehicle Health Report
WARNING:Always follow scheduled maintenance instructions,
regularly inspect your vehicle, and seek repair for any damage or
problem you suspect. Vehicle Health Report supplements

Page 333 of 416

FORD E SERIES 2013 4.G Owners Manual To run a report using the phone button:
1. Press the phone button to enter Phone Menu.
2. Scroll until Vehicle Health is selected and press OK.
3. Scroll to select from the following options:
Vehicle

Page 334 of 416

FORD E SERIES 2013 4.G Owners Manual SYNC Services: Traffic, Directions & Information (TDI)
Note:SYNC Services requires activation prior to use. Visit
www.SYNCMyRide.com to register and check your eligibility for
complimentary services.

Page 335 of 416

FORD E SERIES 2013 4.G Owners Manual Connecting to SYNC Services Using Voice Commands
1. Press the voice button.
2. When prompted, say “Services”. This initiates an outgoing call to
SYNC Services using your paired and connected Bluet

Page 336 of 416

FORD E SERIES 2013 4.G Owners Manual Disconnecting from SYNC Services
1. Press and hold the phone button on the steering wheel.
2. Say “Good-bye” from the SYNC Services main menu.
SYNC Services Quick Tips
PersonalizingYou can persona

Page 353 of 416

FORD E SERIES 2013 4.G Owners Manual Vehicle Health Report/Services
(Traffic, Directions and Information) Issues
Issue Possible
Cause(s)Possible Solution(s)
I received a text
that the Vehicle
Health Report is
not activated.•Your accoun

Page 372 of 416

FORD E SERIES 2013 4.G Owners Manual Potential Station Issues
Issue Cause Action
Echo, stutter, skip or
repeat in audio.
Increase or decrease
in audio volume.Poor time alignment
by the radio
broadcaster.None. This is a
broadcast issue.
S