2013 FIAT PANDA window

GETTING TO KNOW YOUR CAR
INSTRUMENT PANELThe presence and position of the controls, instruments and indicators may vary according to the different
versions.1. Adjustable and directable air diffusers 2. Exterior light control lever 3. Driver front airbag 4. Windscreen wiper/rear
window wiper/trip computer control lever 5. Adjustable and directable centre air diffusers 6. Passenger front airbag
7. Glove compartment (for versions/markets where provided) 8. Car radio (for versions/markets, where provided)
9. Control buttons 10. Gear lever 11. Heating/ventilation/climate control system controls 12. Ignition switch
13. Instrument panel 14. Electric front windows 15. ECO/ASR OFF buttons (for versions/markets, where provided)
fig. 1
F0W0092
3GETTING TO
KNOW YOUR CARSAFETY
STARTING AND
DRIVING
WARNING LIGHTS
AND MESSAGES
IN AN EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX

To adjust proceed as follows:
❒select the desired mirror (left or right) using
switch A fig. 24 ;
❒move switch A to position B and manipulate it to
adjust the left door mirror;
❒move switch A to position D and manipulate it to
adjust the right door mirror.
Once you have finished the adjustment, return switch
A to intermediate locking position C.
IMPORTANT When the heated rear window is
activated, door mirror defrosting is activated (for
versions/markets, where provided).Manual folding
If necessary, fold the mirrors by moving them from
position 1 (open) to position 2 (closed) fig. 25.
IMPORTANT When driving the mirrors must always
be in position 1 (open).
fig. 24
F0W0190
fig. 25
F0W0220
30GETTING TO
KNOW YOUR CAR
SAFETY
STARTING AND
DRIVING
WARNING LIGHTS
AND MESSAGES
IN AN EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX

CLIMATIC COMFORTDIFFUSERS1. Fixed upper diffusers 2. Adjustable and directable and fixed side diffusers for side windows 3. Adjustable and directable
centre air diffusers 4. Passenger compartment footwell diffusers
fig. 28
F0W0230
32GETTING TO
KNOW YOUR CAR
SAFETY
STARTING AND
DRIVING
WARNING LIGHTS
AND MESSAGES
IN AN EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX

A Air temperature knob (red=hot/blue=cold)fig. 29
B Air recirculation knob fig. 29
internal air recirculation
air intake from outside
IMPORTANT It is advisable to switch the air
recirculation on whilst queuing or in tunnels, or
whilst driving on dusty roads, to prevent the
introduction of polluted air. However, it is better not
to use the function for long periods, particularly if
there are many people on board, to prevent the
windows from misting.
C Air distribution knob fig. 29
towards the body and the side windowstowards the body, the side windows and the feettoward the feet mainlytowards the feet and the windscreentowards the windscreen only
D Heated rear window, folding mirror/heated
windscreen (for versions/markets, where available)
activation/deactivation button fig. 29.
The LED on the button lights up to indicate
activation.
In order to maintain battery efficiency, the function is
automatically deactivated after about 20 minutes.E Fan speed and climate control system activation/
deactivation knob fig. 29 (for versions/markets,
where provided). Press the knob to activate
the climate control system; the LED on the knob
switches on. This enables rapid cooling of the
passenger compartment. .
NoteTo stop the air flow from the vents turn the
knob to 0.
PASSENGER COMPARTMENT
VENTILATION
To ventilate the passenger compartment well,
proceed as follows:
❒turn knob A fig. 29to the blue section;
❒Turn selector B to external air recirculation
;
❒turn knob C to
;
❒turn knob E to the desired speed.
CLIMATE CONTROL (cooling - for
versions/markets, where provided)
For fast cooling of the passenger compartment,
proceed as follows:
❒turn knob A fig. 29to the blue section;
❒turn knob B to internal air recirculation
;
❒turn knob C to
;
34GETTING TO
KNOW YOUR CAR
SAFETY
STARTING AND
DRIVING
WARNING LIGHTS
AND MESSAGES
IN AN EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX

❒press button E to turn the climate control system
on; the LED on the button will switch on;
❒turn knob E to the desired speed.
Cooling adjustment
❒turn knob A fig. 29 to the right to increase the
temperature;
❒turn knob B to external air recirculation
;
❒turn knob E to the desired speed;
PASSENGER COMPARTMENT HEATING
For optimal heating of the passenger compartment,
proceed as follows:
❒turn knob A fig. 29to the red section;
❒turn knob C to the desired symbol;
❒turn knob E to the desired speed.
FAST PASSENGER COMPARTMENT
HEATING
For fast heating of the passenger compartment,
proceed as follows:
❒turn knob A fig. 29to the red section;
❒Turn the knob to internal air recirculation
;
❒turn knob C to
;
❒turn knob E to 4
(max. fan speed).
Then use the controls to maintain the required
comfort conditions and turn knob B to the outside
air intake symbol.IMPORTANT With a cold engine, you have to wait
for a few minutes to let the system fluid reach
optimum operating temperature.
Fast windscreen and front side window
demisting/defrosting (MAX-DEF)
Proceed as follows:
❒turn knob A to the red section;
❒turn knob B to
;
❒turn knob C to
;
❒turn knob E to 4 (maximum fan speed).
IMPORTANT The climate control system is very
useful for speeding up demisting since it dehumidifies
the air. Adjust the controls as described above and
press knob E
to switch the climate control system
on (the LED on the knob will switch on - for
versions/markets, where provided).
Heated rear window demisting/defrosting
Press the
button to activate: when this function is
activated, the button LED switches on.
For versions/markets where provided, press the
button to activate also demisting/defrosting
of windscreen (with engine running only) and door
mirrors (for versions/markets, where provided).
This function is timed and switches off automatically
after 4 minutes for the windscreen and 20 minutes
for the rear window and door mirrors. Press the
button
again to switch the function off in advance.
35GETTING TO
KNOW YOUR CARSAFETY
STARTING AND
DRIVING
WARNING LIGHTS
AND MESSAGES
IN AN EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX

To activate the heated windscreen again press the
button
:
❒twice with LED on the button still on;
❒once with LED on the button off.
IMPORTANT Do not apply stickers on the inside of
the rear window over the heating filaments to avoid
damage.
ADDITIONAL HEATER
(for versions/markets, where provided)
This allows the passenger compartment to be heated
more quickly in cold weather conditions. The heater
switches on automatically according to the
environmental conditions and with engine started
when the temperature of the engine coolant is low.
The additional heater turns off automatically after
the required comfort conditions are achieved.
The heater only operates if the outside temperature
and engine coolant temperature are low. The heater
will not activate if the battery voltage is too low.SYSTEM MAINTENANCE
In winter, the climate control system must be turned
on at least once a month for about 10 minutes.
Have the system inspected at a Fiat Dealership
before the summer.
36GETTING TO
KNOW YOUR CAR
SAFETY
STARTING AND
DRIVING
WARNING LIGHTS
AND MESSAGES
IN AN EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX

Buttons A - Manual air distribution selection
By pressing the buttons, one of the five possible
air flow distribution modes can be selected:
air flow to the windscreen and front side window
diffusers to demist or defrost them.air flow to central and side dashboard vents to
ventilate the chest and the face during the hot
season.towards the footwell diffusers. Due to the
natural tendency of heat to rise, this type of
distribution warms the passenger compartment
up as quickly as possible, providing an immediate
feeling of warmth.+
distribution between footwell diffusers
(warmest air) and dashboard vents (coolest
air).
+
distribution between footwell diffusers and
windscreen/front side window vents. This
type of distribution achieves effective
heating of the passenger compartment and
prevents the windows from misting up.
Button B
- MAX-DEF function activation
When thebutton is pressed the system activates
all the functions required for fast demisting/
defrosting:
❒compressor on (if the weather conditions are
suitable);
❒air recirculation off;
❒maximum air temperature setting (HI);❒fan speed determined according to the coolant
temperature;
❒air flow conveyed to thewindscreen and front side
windows;
Button C
- Climate control compressor
activation/deactivation
Pressing button C activates/deactivates climate
control:
❒LED on button on: compressor on;
❒LED on button off: compressor off.
When the compressor is off:
❒the system will deactivate air recirculation to
prevent the windows from misting up;
❒it is not possible to convey air to thepassenger
compartment with a temperature below the
outside temperature (the displayed temperature
value will flash when the system cannot guarantee
the requested comfort conditions);
❒the fan speed can be reset manually (with
compressor enabled, ventilation cannot go below a
bar shown on the display).
Button D
- Internal air recirculation
activation/deactivation
It is advisable to switch the internal air recirculation
on whilst queuing or in tunnels to prevent the
introduction of polluted air.
At low temperatures or if the compressor is off, the
recirculation is forced to off to prevent misting.
38GETTING TO
KNOW YOUR CAR
SAFETY
STARTING AND
DRIVING
WARNING LIGHTS
AND MESSAGES
IN AN EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX

IMPORTANT It is inadvisable to use air recirculation
when the outside temperature is low, since the
windows could mist rapidly.
Button E
- Climate control on/off
Pressing thebutton switches the system on/off.
With the system off, the climate control system
conditions are as follows:
❒all LEDs are off;
❒set temperature display is off;
❒air recirculation is off;
❒compressor is off;
❒fan is off.
Button F- Heated rear window, folding
mirror/heated windscreen (for versions/
markets, where available) activation/
deactivation
Pressing thebutton switches on the LED on the
button.
Buttons G/M
/
- Fan speed adjustment
Use buttons G
or M
to increase or decrease the
air flow.
Button H (AUTO) - AUTO function activation
(automatic climate control operation)
When the AUTO button is pressed and the required
temperature is set, the system adjusts thetemperature, quantity and distribution of air entering
the passenger compartment and controls
compressor operation.
Button I - Air temperature increase
When the button is pressed, the passenger
compartment air temperature increases.
Button L - Air temperature decrease
When the button is pressed, the passenger
compartment air temperature decreases.
DESCRIPTION
The automatically controlled parameters and
functions are:
❒air temperature at the vents;
❒air distribution at the vents;
❒fan speed (continuous variation of the air flow);
❒compressor activation (for cooling/dehumidifying
the air);
❒air recirculation.
All functions may be changed manually. In other
words, you may select one or more functions and
change the parameters as required. Automatic
control of the manually changed functions will be
suspended: the system will only override your
settings for safety-related reasons (e.g. risk
of misting).
39GETTING TO
KNOW YOUR CARSAFETY
STARTING AND
DRIVING
WARNING LIGHTS
AND MESSAGES
IN AN EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX