2013 FIAT PANDA time

REGIONAL MODE function
(regional transmission reception)
Some national broadcasters will transmit regional
programmes at certain times of the day (that vary
from region to region).
This function makes it possible to tune into local
(regional) broadcasters automatically (see "EON
function" paragraph).
If you want the radio to automatically tune into the
regional stations being broadcast on the selected
network, the function must be activated.
To activate/deactivate the function use the
or
buttons.
The current status of the function appears on the
display:
❒"Regional On": function activated;
❒"Regional Off": function deactivated.
If the function is deactivated and you have tuned into
a regional station working in a given area and you
enter a different area, then the regional station
received in the new area will be broadcast.
Note
If the AF and REG functions are on at the same time,
once a border between two regions is crossed, the
radio may not switch correctly to a valid alternative
frequency.MP3 DISPLAY function
(MP3 CD data display)
This function makes it possible to select the
information shown by the display when listening to a
CD containing MP3 tracks.
The function can only be selected if an MP3 CD is
inserted: in this case "MP3 Display" will appear on the
display.
To change the function, use the
or
buttons.
The following settings are available:
❒"Title" (track title, if the ID3-TAG is available);
❒"Author" (track author, if ID3-TAG is available);
❒"Album" (track album, the ID3-TAG if available);
❒"Folder" name (name assigned to the folder);
❒"File" name (name assigned to the MP3 file).
249
SOUND-SYSTEM

SYSTEM RESET function
This function is used to restore all settings to the
factory values.
The options are:
❒NO: no restore intervention;
❒YES: the default parameters will be restored.
During this operation, the text “Resetting” appears
on the display. At the end of the operation, the
source does not change and the previous situation
will be displayed.
PHONE SET-UP
If a hands-free kit is installed on the car, when there
is an incoming phone call the radio audio will be
connected to the telephone output. The incoming
telephone sound always arrives at a fixed volume, but
it can be adjusted during the conversation using the
ON/OFF button/knob.
The fixed telephone audio volume can be adjusted
using the "SPEECH VOLUME" function in the Menu.
The text “PHONE” appears on the display during the
telephone audio deactivation.ANTI-THEFT PROTECTION
The radio is equipped with an anti-theft protection
system based on the exchange of information
between the radio and the electronic control unit
(Body Computer) on the car.
This system guarantees maximum safety and prevents
the secret code from being entered each time the
radio power supply is disconnected.
If the check has a positive outcome, the radio will
start to function, whereas if the comparison codes
are not the same or if the electronic control unit
(Body Computer) is replaced, the device will ask the
user to enter the secret code according to the
procedure described in the paragraph below.
Entering the secret code
When the radio is switched on, if the code is
requested, the display will show "Radio code" for
about 2 seconds followed by four dashes "----".
The code is made up of four numbers from 1 to 6,
each corresponding to one of the dashes.
To enter the first digit of the code, press the
corresponding button of the pre-selected stations
(from 1 to 6). Enter the other code digits in the same
way.
If the four digits are not entered within 20 seconds,
the display will show "Enter code----".Ifthis
occurs, it is not considered an incorrect code entry.
After entering the fourth digit (within 20 seconds),
the car radio will start to work.
252
SOUND-SYSTEM

If an incorrect code is entered, the radio will emit a
sound and the display shows the text "Radio
blocked/wait" to notify the user of the need to enter
the correct code.
Each time the user enters an incorrect code, the
waiting time will gradually increase (1 min, 2 min, 4
min, 8 min, 16 min, 30 min, 1 h, 2 h, 4 h, 8 h, 16 h, 24
h) up to a maximum of 24 hours.
The waiting time will be shown on the display with
the text "Radio blocked/wait". After the text has
disappeared it is possible to start the code entering
procedure again.Car radio passport
This document certifies the ownership of the car
radio. The car radio passport shows the radio model,
serial number and secret code.
Note
Keep the car radio passport in a safe place so that
you can give the information to the relevant
authorities if the car radio is stolen.
In case of loss of the car radio passport, contact the
Fiat Dealership, taking an ID document and the car
ownership documents.
253
SOUND-SYSTEM

RADIO (TUNER)INTRODUCTION
When the radio is switched on, the last function
selected before it was switched off is activated:
Radio, CD, CD MP3 or Media Player (only with
Blue&Me™) or AUX (only withBlue&Me™, for
versions/markets, where provided).
To select the Radio function when another audio
source is being listened to, briefly press the FM AS or
AM buttons depending on the desired band.
Once the Radio mode has been activated, the display
will show the name (RDS stations only) and the
frequency of the selected radio station, the frequency
band selected (e.g. FM1) and the preselect button
number (e.g. P1).FREQUENCY BAND SELECTION
With the Radio mode active, press the FM AS or AM
button briefly and repeatedly to select the desired
reception band.
Each time the button is pressed the following bands
are selected cyclically:
❒By pressing the FM AS button: “FM1”, “FM2” or
“FMA”;
❒By pressing the AM button: “MW1, MW2”.
Each band is highlighted by the name in the display.
The last station selected on the respective frequency
band will be tuned into.
The FM band is divided into sections: FM1, FM2 or
"FMA"; the FMA reception band is reserved for
broadcasters stored automatically using the
Autostore function.
254
SOUND-SYSTEM

AUTOSTORE FUNCTION
(automatic station storing)
To activate the Autostore function, hold the FM AS
button down until a beep is heard. With this
function, the radio automatically stores the 6 stations
with the strongest signal in a decreasing order on the
FMA frequency band.
During the automatic storing process, the text
“Autostore” flashes on the display.
Press the FM AS button again to stop the Autostore
function: the radio will again tune into the station
listened to before the activation of the function.
When the Autostore function has finished, the radio
automatically tunes into the first preselected station
on the FMA band on the preset side 1.
The stations that have a strong signal at that moment
are then automatically stored in the preselected band
on the buttons numbered 1 to 6.
When the Autostore function is activated within the
MW band, the FMA band is automatically selected
and the function is performed there.
Note
Sometimes the Autostore function is not able to find
6 stations with a strong signal. In this case, the
strongest stations stored will be duplicated in the
free preset buttons.Note
When the Autostore function is activated, the
stations that were previously stored in the FMA band
are deleted.
EMERGENCY ALARM RECEPTION
The radio is configured to receive emergency alerts
in RDS mode in exceptional circumstances or where
dangerous situations are present (earthquakes,
floods, etc.) if these are being transmitted by the
current broadcaster.
This function is activated automatically and cannot be
turned off.
The word “Alarm” will be shown in the display during
the transmission of an emergency announcement.
The volume of the radio changes during this
announcement in the same way as during traffic
news.
256
SOUND-SYSTEM

EON FUNCTION (Enhanced Other Network)
In some countries, there are circuits that group
multiple broadcasters that transmit traffic
information together. In this case, the programme of
the station that is being listened to will be
temporarily interrupted to:
❒receive traffic alerts (only with the TA function
activated);
❒listen to regional transmissions each time these are
broadcast by one of the broadcasters on the same
circuit.
STEREOPHONIC BROADCASTERS
If the incoming signal is weak, the reproduction is
automatically switched from Stereo to Mono.
CD PLAYERINTRODUCTION
This section describes the variants regarding the
operation of the CD player: as far as the operation of
the radio is concerned, refer to the description in the
"Functions and Adjustments" chapter.
SELECTING THE CD PLAYER
To activate the CD player built into the equipment,
proceed as follows:
❒insert a CD with the equipment switched on: the
first track will start to play;
or
❒if a CD has already been loaded, turn on the car
radio and then briefly press the CD button to
select the “CD” operating mode: the last track
listened to will start to play.
It is advisable to use original CDs to ensure optimum
playback. If CD-R/RWs are used, we recommend
using good quality media that are burnt at the
slowest speed possible.
257
SOUND-SYSTEM

LOADING/EJECTING A CD
To load the CD, insert it gently into the slot to
activate the motorised loading system, which will
position it correctly.
The CD can be loaded with radio off and the ignition
key turned to MAR: in this case the radio will remain
off. When the radio is turned on, the last source
listened to before being switched off will be
activated.
When a CD is inserted the display will show the
symbol "CD-IN" and the text "CD Reading". They
will remain displayed for the entire time required for
the radio to read the CD tracks. When this time has
elapsed the radio automatically starts playing the first
track.
Press the
button (EJECT) with the radio on to
activate the motorised ejection of the CD. After
ejection, the last audio source listened to before
playing the CD will be heard.
WARNING
Do not inadvertently press the eject
button when inser ting a CD.If the CD is not removed from the radio, it will
automatically be reloaded about 20 seconds later and
the Tuner mode will be activated (Radio).
The CD cannot be ejected if the car radio is off.
If the ejected CD is reloaded without having removed
it completely from the slot, the radio will not switch
to the CD source.
Possible error messages
If the CD loaded cannot be read (e.g. a CD ROM has
been inserted or the CD is inserted the wrong way
round or there is a reading error) the display will
show the words "CD error".
The CD will then be ejected and the audio source
activated prior to the CD mode selection will be
heard.
With an external audio source activated ("TA",
"ALARM" and "Phone"), the CD that cannot be read
will not be ejected until these functions have ended.
At the end, with the CD mode activated, the display
will show the text "CD error" for a few seconds and
then the CD will be ejected.
If the CD player overheats CD playback could be
temporarily interrupted. The radio will automatically
switch to the Radio (Tuner) mode and the display will
show “CD hot” and then “CD error”.
258
SOUND-SYSTEM

DISPLAY INFORMATION
When the CD player is in operation, information
appears on the display with the following meanings:
❒"CD Track 5": indicates the number of the CD
track;
❒"03.42": indicates the time elapsed since the start
of the track (if the relevant Menu function is
activated).
TRACK SELECTION (forward/backward)
Briefly press the
button to play the previous CD
track and the
button to play the next track.
The tracks are selected cyclically: the first track is
selected after the last track and vice versa.
If the track has been played for more than 3 seconds,
pressing thebutton will cause the track to be
started again from the beginning.
In this case, if you want to play the previous track,
press the button twice consecutively.
TRACK FAST FORWARD/REWIND
Keep the
button pressed down to fast forward the
selected track and hold the
button down to fast
rewind the track.
The fast forward/rewind will stop once the button is
released.PAUSE FUNCTION
To pause the CD player, press the
button. The text
“CD Pause” appears on the display.
To resume listening to the track, press the
button
again. If another audio source is selected, the pause
function is turned off.
259
SOUND-SYSTEM