REGIONAL MODE function
(regional transmission reception)
Some national broadcasters will transmit regional
programmes at certain times of the day (that vary
from region to region).
This function makes it possible to tune into local
(regional) broadcasters automatically (see "EON
function" paragraph).
If you want the radio to automatically tune into the
regional stations being broadcast on the selected
network, the function must be activated.
To activate/deactivate the function use the
or
buttons.
The current status of the function appears on the
display:
❒"Regional On": function activated;
❒"Regional Off": function deactivated.
If the function is deactivated and you have tuned into
a regional station working in a given area and you
enter a different area, then the regional station
received in the new area will be broadcast.
Note
If the AF and REG functions are on at the same time,
once a border between two regions is crossed, the
radio may not switch correctly to a valid alternative
frequency.MP3 DISPLAY function
(MP3 CD data display)
This function makes it possible to select the
information shown by the display when listening to a
CD containing MP3 tracks.
The function can only be selected if an MP3 CD is
inserted: in this case "MP3 Display" will appear on the
display.
To change the function, use the
or
buttons.
The following settings are available:
❒"Title" (track title, if the ID3-TAG is available);
❒"Author" (track author, if ID3-TAG is available);
❒"Album" (track album, the ID3-TAG if available);
❒"Folder" name (name assigned to the folder);
❒"File" name (name assigned to the MP3 file).
249
SOUND-SYSTEM
SYSTEM RESET function
This function is used to restore all settings to the
factory values.
The options are:
❒NO: no restore intervention;
❒YES: the default parameters will be restored.
During this operation, the text “Resetting” appears
on the display. At the end of the operation, the
source does not change and the previous situation
will be displayed.
PHONE SET-UP
If a hands-free kit is installed on the car, when there
is an incoming phone call the radio audio will be
connected to the telephone output. The incoming
telephone sound always arrives at a fixed volume, but
it can be adjusted during the conversation using the
ON/OFF button/knob.
The fixed telephone audio volume can be adjusted
using the "SPEECH VOLUME" function in the Menu.
The text “PHONE” appears on the display during the
telephone audio deactivation.ANTI-THEFT PROTECTION
The radio is equipped with an anti-theft protection
system based on the exchange of information
between the radio and the electronic control unit
(Body Computer) on the car.
This system guarantees maximum safety and prevents
the secret code from being entered each time the
radio power supply is disconnected.
If the check has a positive outcome, the radio will
start to function, whereas if the comparison codes
are not the same or if the electronic control unit
(Body Computer) is replaced, the device will ask the
user to enter the secret code according to the
procedure described in the paragraph below.
Entering the secret code
When the radio is switched on, if the code is
requested, the display will show "Radio code" for
about 2 seconds followed by four dashes "----".
The code is made up of four numbers from 1 to 6,
each corresponding to one of the dashes.
To enter the first digit of the code, press the
corresponding button of the pre-selected stations
(from 1 to 6). Enter the other code digits in the same
way.
If the four digits are not entered within 20 seconds,
the display will show "Enter code----".Ifthis
occurs, it is not considered an incorrect code entry.
After entering the fourth digit (within 20 seconds),
the car radio will start to work.
252
SOUND-SYSTEM
