CHARGING THE HIGH VOLTAGE BATTERY
1.Put the vehicle in PARK.
2. Turn the ignition to the OFF position.
3. Remove the Level 1 EVSE from its storage bin by lifting the rear cargo cover .
4. Uncoil the entire length of the EVSE
(charge cord).
5. Plug the EVSE into a standard 120V AC
outlet that is properly grounded. It is rec-
ommended that the EVSE is connected
to an AC outlet on a circuit which is not
electrically loaded by other devices.
Extension cords may not be used.
NOTE:
All of the EVSE LED’s illuminate green.
6. Open the charge receptacle door .
NOTE:
The charge receptacle door is locked when-
ever the vehicle is locked. Unlock the doors
to unlock the charge receptacle door for
charging.
7.
Plug the EVSE into the charge receptacle .
Push the EVSE in firmly until it is com-
pletely engaged (if not completely engaged
the vehicle may not charge) .
GETTING STARTED
16
