Center High Mounted Stop Lamp (CHMSL)
1. Remove the two guard caps and the two fastening
screws.
2. Remove the center high mounted stop lamp assembly.
3. Disconnect the electric connector.
4. Press the retaining device and open the bulb holder.
5. Remove the snap-fitted bulb to be replaced and re-
place it.
6. Close the back cap locking it properly.
7. Reinstall the two fastening screws and reinstall the
guard caps.
384 MAINTAINING YOUR VEHICLE
facilities, factory-trained technicians, special tools, and
the latest information to ensure the vehicle is fixed
correctly and in a timely manner.
This is why you should always talk to an authorized
studio service manager first. Most matters can be re-
solved with this process.
•If for some reason you are still not satisfied, talk to the
general manager or owner of the authorized studio.
They want to know if you need assistance.
•If an authorized studio is unable to resolve the con-
cern, you may contact the manufacturer’s customer
center.
Any communication to the manufacturer’s customer cen-
ter should include the following information:
•Owner’s name and address
•Owner’s telephone number (home and office)
•Authorized studio name
•Vehicle Identification Number (VIN)
•Vehicle delivery date and mileage
FIAT Customer Center
P.O. Box 21–8004
Auburn Hills, MI 48321–8004
Phone: (888) 242–6342
Customer Assistance For The Hearing Or Speech
Impaired (TDD/TTY)
To assist customers who have hearing difficulties, the
manufacturer has installed special TDD (Telecommuni-
cation Devices for the Deaf) equipment at its customer
center. Any hearing or speech impaired customer, who
has access to a TDD or a conventional teletypewriter
(TTY) in the United States, can communicate with the
manufacturer by dialing 1–800–380–CHRY.
9
IF YOU NEED CONSUMER ASSISTANCE 397
Downshifting............................228
Driving
Through Flowing, Rising, or Shallow Standing
Water................................240
Electrical Power Outlets.....................134
Electric Remote Mirrors......................94
Electronic Brake Control System...............249
Brake Assist System.....................250
Electronic Speed Control (Cruise Control)........122
Electronic Stability Control (ESC)..............252
Electronic Vehicle Information Center (EVIC)......160
Emergency, In Case of
Hazard Warning Flasher..................297
Jacking...............................308
Jump Starting..........................320
Towing..............................327
Emission Control System Maintenance..........337
Engine
Air Cleaner...........................344
Break-In Recommendations.................78
Checking Oil Level......................340
Compartment..........................335
Cooling..............................356
Exhaust Gas Caution.....................80
Fails to Start...........................224
Flooded, Starting.......................224
Fuel Requirements......................285
Oil . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..340
Oil Filler Cap..........................342
Oil Selection...........................342
Oil Synthetic..........................343
Overheating...........................297
Starting..............................223
Temperature Gauge......................157
Enhanced Accident Response Feature............53
Event Data Recorder........................58
10
INDEX 409
