West Building, Washington, D.C. 20590. You can also
obtain other information about motor vehicle safety from
http://www.safercar.gov.
In Canada
If you believe that your vehicle has a safety defect, you
should contact the Customer Service Department imme-
diately. Canadian customers who wish to report a safety
defect to the Canadian government should contact Trans-
port Canada, Motor Vehicle Defect Investigations and
Recalls at 1-800-333-0510 or go to http://www.tc.gc.ca/
roadsafety/
PUBLICATION ORDER FORMS
To order the following manuals, you may use either the
website or the phone numbers listed below. Visa, Mas-
tercard, American Express, and Discover orders are ac-
cepted. If you prefer mailing your payment, please call
for an order form.
NOTE:A street address is required when ordering
manuals (no P.O. Boxes).
Service Manuals
These comprehensive Service Manuals provide the infor-
mation that students and professional technicians need in
diagnosing/troubleshooting, problem solving, maintain-
ing, servicing, and repairing FIAT Group Automobiles
vehicles. A complete working knowledge of the vehicle,
system, and/or components is written in straightforward
language with illustrations, diagrams, and charts.
Diagnostic Procedure Manuals
Diagnostic Procedure Manuals are filled with diagrams,
charts and detailed illustrations. These practical manuals
make it easy for students and technicians to find and fix
problems on computer-controlled vehicle systems and
features. They show exactly how to find and correct
400 IF YOU NEED CONSUMER ASSISTANCE
Battery.................................345
Jump Starting..........................320
Keyless Transmitter Replacement (RKE)........20
Belts, Seat...............................81
Body Mechanism Lubrication.................350
B-Pillar Location..........................263
Brake Assist System.......................250
Brake Fluid.............................387
Brake, Parking...........................244
Brakes.................................362
Brake System............................248
Anti-Lock (ABS)........................248
Master Cylinder........................362
Parking..............................244
Warning Light.........................155
Brake/Transmission Interlock.................231
Bulb Replacement.........................380
Bulbs, Light..............................83
Capacities, Antifreeze (Engine Coolant)..........385
Capacities, Fluid..........................385
Caps, Filler
Fuel.................................291
Oil (Engine)...........................342
Carbon Monoxide Warning...................80
Cargo Area Features.......................139
Car Washes.............................368
CD (Compact Disc) Player...................179
Cellular Phone...........................207
Chains, Tire.............................277
Changing A Flat Tire.......................308
Chart, Tire Sizing.........................258
Check Engine Light (Malfunction Indicator Light) . .153
Checking Your Vehicle For Safety...............79
Checks, Safety............................79
Child Restraint............................59
Clean Air Gasoline........................286
10
INDEX 407
INSTALLATION OF RADIO TRANSMITTING
EQUIPMENT
Special design considerations are incorporated into this
vehicle’s electronic system to provide immunity to radio
frequency signals. Mobile two-way radios and telephone
equipment must be installed properly by trained person-
nel. The following must be observed during installation.
The positive power connection should be made directly
to the battery and fused as close to the battery as possible.
The negative power connection should be made to body
sheet metal adjacent to the negative battery connection.
This connection should not be fused.
Antennas for two-way radios should be mounted on the
roof or the rear area of the vehicle. Care should be used
in mounting antennas with magnet bases. Magnets may
affect the accuracy or operation of the compass on
vehicles so equipped.
The antenna cable should be as short as practical and
routed away from the vehicle wiring when possible. Use
only fully shielded coaxial cable.
Carefully match the antenna and cable to the radio to
ensure a low Standing Wave Ratio (SWR).
Mobile radio equipment with output power greater than
normal may require special precautions.
All installations should be checked for possible interfer-
ence between the communications equipment and the
vehicle’s electronic systems.
