TURN SIGNAL/WIPER/WASHER/HIGH BEAM LEVER
Turn Signal/Lane Change Assist
• Tap the lever up or down once and the turn signal (right or left) will flash three times and
automatically turn off.
Front Wipers
Intermittent, Low And High Operation
• Rotate the end of the lever to the first detent position for one of five intermittent settings,
the second detent for low wiper operation and the third detent for high wiper operation.
Mist
• Rotate the end of the lever downward when a single wipe is desired.
NOTE:
The mist feature does not activate the washer pump; therefore, no washer fluid will be
sprayed on the windshield. The wash function must be activated in order to spray the
windshield with washer fluid.
Washer Operation
• Push the end of the lever inward and hold for as long as spray is desired.
High Beam Operation
• Push the lever forward to activate the high beams. Pull the lever toward you for flash to
pass.
NOTE:
For safe driving, turn off the high beams when oncoming traffic is present to prevent headlight
glare and as a courtesy to other motorists.
OPERATING YOUR VEHICLE
23
Towing Vehicle Behind a Motorhome . . .73
Trailer Towing
Trailer and Tongue Weight......73
Trailer Weight...............73
Transmission
Fluid.................106
Turn Signals...............23
Uconnect® Voice Command.......63
Voice Command.............63Voice Prompt Volume
Navigation............44,54
Volume
Navigation Voice Prompt.....44,54
Washers, Windshield...........23
Wheel and Wheel Trim Care.......122
Wind Buffeting..............31
Windshield Washers...........23
Windshield Wipers............23
INDEX
128
