2013 DODGE CHALLENGER SRT keyless entry

[x] Cancel search: keyless entry

Page 24 of 520

DODGE CHALLENGER SRT 2013 3.G Owners Manual This feature also turns on the approach lighting in the
outside mirrors (if equipped). Refer to “Mirrors” in
“Understanding The Features Of Your Vehicle” for fur-
ther information.
The lights

Page 25 of 520

DODGE CHALLENGER SRT 2013 3.G Owners Manual To Unlock The Doors
Press and release the UNLOCK button on the RKE
transmitter once to unlock the driver’s door or twice
within five seconds, to unlock both doors. The turn signal
lights will flash

Page 27 of 520

DODGE CHALLENGER SRT 2013 3.G Owners Manual NOTE:Pressing the LOCK button on the RKE transmit-
ter while you are in the vehicle will activate the Security
Alarm. Opening a door with the Security Alarm activated
will cause the alarm to sound. Pr

Page 28 of 520

DODGE CHALLENGER SRT 2013 3.G Owners Manual 3. Test the feature while outside of the vehicle bypressing the LOCK button on the RKE transmitter
with the ignition switch in the OFF position and the
Key Fob removed.
4. Repeat these steps if you wa

Page 30 of 520

DODGE CHALLENGER SRT 2013 3.G Owners Manual “gap” between the two halves. If equipped, install and
tighten the screw until snug. Test RKE transmitter
operation.
General Information
This device complies with Part 15 of the FCC rules and
RSS

Page 32 of 520

DODGE CHALLENGER SRT 2013 3.G Owners Manual WARNING!(Continued)
•Keep Remote Keyless Entry (RKE) transmitters
away from children. Operation of the Remote Start
System, windows, door locks or other controls
could cause serious injury or death.

Page 36 of 520

DODGE CHALLENGER SRT 2013 3.G Owners Manual The doors can also be locked and unlocked with the
Keyless Enter-N-Go™ (Passive Entry) system. For further
information, refer to “Keyless Enter-N-Go™” in “Things
To Know Before Starting Your

Page 38 of 520

DODGE CHALLENGER SRT 2013 3.G Owners Manual 4. Within 30 seconds, press the power door UNLOCKswitch to unlock the doors.
5. A single chime will indicate the completion of the programming.
NOTE: If you do not hear the chime, it means that the
sy
Page:   < prev 1-8 9-16 17-24 25-32 next >