2013 DODGE AVENGER lights

[x] Cancel search: lights

Page 193 of 519

DODGE AVENGER 2013 2.G Owners Manual POWER SUNROOF — IF EQUIPPED
The sunroof controls are mounted between the dome/
reading lights.
WARNING!
•Never leave children alone in a vehicle, or with
access to an unlocked vehicle. Never leave

Page 199 of 519

DODGE AVENGER 2013 2.G Owners Manual WARNING!
To avoid serious injury or death:
•Only devices designed for use in this type of outlet
should be inserted into any 12 Volt outlet.
• Do not touch with wet hands.
• Close the lid when n

Page 216 of 519

DODGE AVENGER 2013 2.G Owners Manual 5. Low Fuel LightWhen the fuel level drops to approximately
2.0 gallons (7.6 Liters), the fuel symbol will light
and a single chime will sound.
NOTE: This light will remain on until a minimum of
appro

Page 223 of 519

DODGE AVENGER 2013 2.G Owners Manual 17. Electronic Throttle Control (ETC) Indicator LightThis light informs you of a problem with the
Electronic Throttle Control (ETC) system. If a
problem is detected, the light will come on
while the e

Page 225 of 519

DODGE AVENGER 2013 2.G Owners Manual 23. Front Fog Light Indicator — If EquippedThis indicator will illuminate when the front fog
lights are on.
24. Tire Pressure Monitoring Telltale Light
Each tire, including the spare (if provided),

Page 229 of 519

DODGE AVENGER 2013 2.G Owners Manual WARNING!
If you continue operating the vehicle when the
Transmission Temperature Warning Light is illumi-
nated you could cause the fluid to boil over, come in
contact with hot engine or exhaust compo

Page 233 of 519

DODGE AVENGER 2013 2.G Owners Manual SELECT ButtonPress and release the SELECT Button to accept
a selection. The SELECT Button also resets
various Trip Functions.
Electronic Vehicle Information Center (EVIC)
Displays
When the appropriate

Page 242 of 519

DODGE AVENGER 2013 2.G Owners Manual Auto Unlock on Exit
When ON is selected and the transaxle is in the PARK or
NEUTRAL position, all doors will unlock when the
driver’s door is opened. To make your selection, press the
SELECT button