Page 64 of 356
System language
This menu allows you to select the language
used by the display: Deutsch, English,Espanol, Français, Italiano, Nederlands, Polski,
Portugues, Türkçe * .
Date and time
This menu allows you to set the date and time,
the format of the date and the format of the
time: )Press "SETUP". )Select the "Date and time" function andpress the knob to confirm. )Select the "Adjust date and time" function and press the knob to confirm. )Adjust the settings in turn using the
directional arrows, confirming with the knob. )Select the "Date format" function and press
the knob to confirm. )Confirm the desired format using the knob. )Select the "Time format" function andpress the knob to confirm. )Confirm the desired format using the knob.
Display
This menu allows you to set the brightness of
the screen, the screen colour scheme and the
colour of the map (day/night or auto mode).
*
Accordin
g to country.
Vehicle
This menu allows you to activate or deactivate certain driving and comfor t equipment:
- wiper linked with reverse gear (refer to the "Visibility"),
- guide-me-home lighting and duration (refer
to the "Visibility"),
- parking sensors (refer to the "Driving"section).
Units
This menu allows you to select the units:
temperature (°C or °F) and fuel consumption(km/l, l/100 or mpg).
System
This menu allows you to restore the factory configuration, display the software version and
activate scrolling text.
For safety reasons, configuration of the multifunction screen by the driver mustonly be done when stationary.
Page 72 of 356
1. Temperature adjustment
) Turn the dial from blue(cold) to red (hot) to adjust
the temperature to your
requirements.
2. Air fl ow adjustment
)
Turn the dial from position 1toposition 5to obtain a comfortable air flow.
)If you place the air flow controlin position 0(deactivation of thesystem), the temperature is nolonger maintained at a comfortable level. However, a slight flow of air,due to the movement of the vehicle, can still be felt.
3. Air distribution adjustment
Windscreen and side windows.
Windscreen, side windows andfootwells.
F
ootwells.
Central and side vents.
The air distribution can be adapted by placing the dialin an intermediate position.
4. Air intake / Air recirculation
The intake of exterior air avoids the formation of mist on the windscreen and side windows.
The recirculation of interior air insulates thepassenger compar tment from exterior odours and smoke.
Return to exterior air intake as soon as possible
to prevent deterioration of the air quality and
the formation of mist.
Manual control panel
) Move the manual control tothe left to be in the "recyclinginterior air" position.
)
Move the manual control to the
right to return to the "fresh air intake" position.
Page 77 of 356
75
Comfort
6. Air distribution adjustment
Pressing this button several times insuccession enables the air flow to bedirected in turn towards:
- t
he windscreen and the side windows(demisting or defrosting),
- the windscreen, side windows and air
vents,
- the windscreen, the side windows, the air
vents and the footwells,
- the windscreen, the side windows and the
footwells,
- the footwells
,
- the air vents and the footwells,
- the air vents.
Avoid driving for long periods with the air conditioning switched off (risk of misting and reduction of the air quality in the cabin).
Press the "full fan"button toincrease the air flow.
7. Air fl ow adjustment
The air flow symbol, the fan, fills progressively according to the value requested.
Pr
ess the "empty fan"
button todecrease the air flow.
Switching the system off
Press the air flow "empty fan"button 7until the fan symbol
disappears.
Thi
s action switches off all of the functions of
the air conditioning system.
Thermal comfort is no longer controlled. A slight flow of air resulting from the movementof the vehicle, remains perceptible however.
Pressing the air flow "full fan"
button 7 or on "AUTO"reactivates the system with the
values set before it was switched off.
Page 87 of 356
85
Comfort
These have one position for use (up) and a stowed position (down).
They can also be removed.
To remove a head restraint: )release the backrest using control 1, )tilt the backrest 2slightly forwards, )pull the head restraint upwards to the stop, )then, press the lug A
.
Rear head restraints
Never drive with the head restraints removed; they must be in place and correctly adjusted.
Steering wheel adjustment
)When stationary, pull the control lever toyrelease the adjustment mechanism. )
Adjust the height and reach to suit your
driving position. ) Push the control lever to lock the
adjustment mechanism.
As a safety precaution, theseoperations should only be carried outwhile the vehicle is stationary.
Page 89 of 356
87
Comfort
Rear view mirror
Manual day/night model
Adjustment
)
Adjust the mirror so that the glass is
directed correctly in the "day" position.
Day / night position
) Pull the lever to change to the "night" anti-dazzle position. )
Push the lever to change to the normal "day" position.
B
y means of a sensor, which measures the
light from the rear of the vehicle, this system
automatically and progressively changes
between the day and night uses.
Automatic day/night model
In order to ensure optimum visibilityduring your manoeuvres, the mirror lightens automatically when reversegear is engaged.
As a safety measure, the mirrorsshould be adjusted to reduce the "blindspot".
Adjustable mirror providing a central rearwardview.
Equipped with an anti-dazzle system, whichdarkens the mirror glass: this reduces
the nuisance to the driver caused by the headlamps from following vehicles, low sun...
Page 92 of 356
Remote control key System which permits central unlocking or locking of the vehicle using the lock or from a distance. It is also used to locate and start the vehicle, as well as providing protection against theft.
Unlocking the vehicle
Unfolding the key
)First press this button to unfold the key.
Unlocking using the remote
control
Unlocking using the key
)
Turn the key to the right in the driver's door lock to unlock the vehicle.
Locking the vehicle
Locking using the remote control
Locking is confirmed by fixed lighting of
the direction indicators for approximatelytwo seconds.
According to version, the door mirrors fold at
the same time.
)Press the open padlock to unlockthe vehicle.
)
Press the closed padlock to lockthe vehicle.
Unlockin
g is confirmed by rapid flashing of
the direction indicators for approximately
two seconds.
According to version, the door mirrors unfold at
the same time.
Locking using the key
)Turn the key to the left in the driver's door lock to lock the vehicle completely.
Page 93 of 356
91Access
If one of the doors or the boot is stillopen, the central locking does not takeplace.
When the vehicle is locked, if it isunlocked inadvertently, it will relockautomatically after thirty secondsunless a door or the boot is open.
The folding and unfolding of the door mirrors using the remote control can bedeactivated by a CITROËN dealer or a qualified workshop.
Folding the key
)
First press this button to fold the key.
If you do not press the button when folding the key, there is a risk of damage to the mechanism.
Deadlocking using the remote
control
)
Press the closed padlock to lock
the vehicle completely.
) Press the closed padlock again withinfive seconds to deadlock the vehicle.
Deadlocking using the key
)
Turn the key to the left in the driver's door lock to lock the vehicle completely. )
Turn the key to the left again within five seconds to deadlock the vehicle.
Deadlocking is confirmed by fixed lightingof the direction indicators for approximately
two seconds.
According to version, the door mirrors fold at
the same time.
Deadlocking renders the exterior andinterior door controls inoperative.
It also deactivates the manual centralcontrol button.
Therefore, never leave anyone insidethe vehicle when it is deadlocked.
Page 94 of 356
This is indicated by lighting of the cour tesylamps and flashing of the direction indicators for a few seconds.
Locating your vehicle
)
Press the closed padlock to locate your locked vehicle in acar park.
Anti-theft protection
Electronic engine immobiliser
The key contains an electronic chip which has
a special code. When the ignition is switchedon, this code must be recognised in order for
star ting to be possible.
This electronic en
gine immobiliser locks theengine management system a few minutes
after the ignition is switched off and prevents
starting of the engine by anyone who does not
have the key.
In the event o
f a fault, you are
informed by illumination of this
warning lamp, an audible signal and a message
in the screen.
In this case, your vehicle will not start; contact
a CITROËN dealer as soon as possible.
- P
osition 1: Stop
- Position 2: Ignition
- Position 3: Starting
Ignition switch
Keep safely the label attached to thekeys given to you on acquisition of the vehicle.
