2013 CITROEN DS3 CABRIO instrument panel

[x] Cancel search: instrument panel

Page 174 of 421

CITROEN DS3 CABRIO 2013  Handbook (in English) Automatic operation 
�)Select position Dfor  automaticchanging 
of the four gears.
The gearbox then operates in auto-adaptive mode, without any inter vention on the par t 
of the driver. It continuous

Page 175 of 421

CITROEN DS3 CABRIO 2013  Handbook (in English) 173Driving
   
Manual operation
Ddisappears and the gears engaged appear in succession on the
instrument panel.
If the en
gine speed is too low or 
too high, the gear selected flashes for a fewseconds

Page 176 of 421

CITROEN DS3 CABRIO 2013  Handbook (in English)    
 
 
 
 
 
 
 
 
 
 
Stop & Start The Stop & Start system puts the engine temporarily into standby - STOP mode - during stops in the traffic (red lights, traffic jams, or other...).
The engine rest

Page 178 of 421

CITROEN DS3 CABRIO 2013  Handbook (in English)    
The system is reactivated automaticallyat every new star t using the key.  
Reactivation 
 This system requires a battery with a specialspecification and technology (reference numbers available fr

Page 179 of 421

CITROEN DS3 CABRIO 2013  Handbook (in English) 177Driving
   
 
 
 
 
Hill start assist 
 System which holds your vehicle temporarily (approximately 2 seconds) when star ting on a slope, the time it takes to move your foot from 
the brake pedal to

Page 180 of 421

CITROEN DS3 CABRIO 2013  Handbook (in English) System which prevents the vehicle fromexceeding the speed programmed by the driver. 
When the programmed speed limit is reached, pressing the accelerator pedal in the normalmanner no longer has any ef

Page 182 of 421

CITROEN DS3 CABRIO 2013  Handbook (in English)    
 
 
 
 
Cruise control 
System which automatically maintains the
speed of the vehicle at the value programmed 
by the driver, without any action on the accelerator pedal. 
The cruise control is sw

Page 185 of 421

CITROEN DS3 CABRIO 2013  Handbook (in English) 183Driving
   
ProgrammingOperating faults
 
If there is an operating fault, when
reverse gear is engaged this warning lamp comes on in the instrument panel, accompanied by an audible signal (short be
Page:   < prev 1-10 ... 9-16 17-24 25-32 33-40 41-48 next >