2013 Citroen C3 RHD light

1
Monitoring
23
Panel grouping together the vehicle operation indication dials and warning lamps.
























Instrument panels with manual gearbox
5.Display management button.Servicing information.
Adjust the time and choose units.
R
eset the service indicator.6.Instrument panel lighting button.Adjusts the brightness of the lighting of the
instruments and controls.
1.Rev counter. Indicates the speed of rotation of the engine (x 1 000 rpm). 2.Vehicle speed. Indicates the current speed of the moving
vehicle (mph or km/h). 3. Fuel level. Indicates the quantity of fuel remaining in
the tank. 4.Screen.
A.Ambient temperature. (°Celsius or °Fahrenheit)B.Gear efficiency indicator.C.Time.D.Engine oil level indicator. Appears a few seconds after switching on
the ignition, then disappears. E.Trip computer.F.Ser vice indicator. (miles or km) then, Total mileage. These two functions are displayed successively when switching on
the i
gnition.



Screen
For more information, refer to thesection on the button or function and its associated display.


Dials

Monitoring
24

















Instrument panels for electronic or automatic gearboxes
Panel grouping together the vehicle operation indication dials and warning lamps. Depending on the version, the instrument panel may have permanent
back-lighting.
1.Rev counter.Indicates the speed of rotation of the
engine (x 1 000 rpm).2.Vehicle speed.Indicates the current speed of the moving
vehicle (mph or km/h).3.Fuel level.Indicates the quantity of fuel remaining in
the tank. 4.Screen.5.Display management button.
Alternates display between range and trip mileage recorder.
Servicing information.
Resets the selected function to zero (trip
distance recorder or ser vice indicator
).
6.Instrument panel lighting button. Adjusts the brightness of the lighting of the
instruments and controls.


ScreenDials
For more information, refer to thesection on the button or function and its associated display.A
.Speed limiter (mph or km/h) or Cruise control.B.Gear efficiency indicator.C.Electronicorautomatic gearboxinformation.D.Range (miles or km) or Trip mileage recorder.E.
Ser vice indicator
r (miles or km), then Total mileage recorder. These two functions are displayedsuccessively when switching on the ignition
F.Engine oil level indicator. Appears a few seconds after switching on
the ignition, then disappears.

1
Monitoring
25

Visual indicators informing the driver that a system is in operation (operation or deactivation indicator lamps) or of the occurrence of a fault (warning lamp).


When the ignition is switched on

Certain warning lamps come on for a few seconds when the vehicle's ignition is switched on.
When the engine is star ted, these same
warning lamps should go off.
If they remain on, before moving off, refer to the
information on the warning lamp concerned.

Operation indicator lamps

If one of the following indicator lamps comes on, this confirms that the corresponding system has come into operation.

Associated warnings
The illumination of cer tain warning lamps may
be accompanied by an audible signal and a
message in the multifunction screen.The warning lamps may come on continuously (fixed) or flash.
Warning lampis onCauseAction / Observations
Left-hand direction indicator flashing with buzzer.The lighting stalk is pushed down.
Right-handdirection indicatorr

flashing with buzzer. The lighting stalk is pushed up.
Sidelamps

fixed. The lighting stalk is in the
"Sidelamps" position.
Hazard warning lamps flashing with audiblesignal.The hazard warning lamps switch,
located on the dashboard, has been
operated. The left-hand and right-hand direction indicators and
their associated indicator lamps flash simultaneously.
Certain warning lamps may come on
in one of two different modes. Only by relating the type of illumination to the operating status of the vehicle can itbe ascertained whether the situation isnormal or whether a fault has occurred.









Indicator and warning lamps

Monitoring
26
Front foglampsfixed.The front foglamps are switched on. Turn the ring on the stalk rear wards twice to switch off
the front foglamps.
Rear foglampsfixed.The rear foglamps are switched on. Turn the ring on the stalk rear wards to switch off the
rear foglamps.
Diesel engine pre-heatingfixed.The ignition switch is at the
2nd position (ignition on).Wait until the warning lamp goes off before star ting.
The period of illumination of the warning lamp is
determined by the climatic conditions (up to about
thirty seconds in extreme climatic conditions).
If the engine does not star t, switch the ignition off and
then on, wait until the warning lamp goes off again,
then star t the engine.
Parking brakefixed.The parking brake is applied or not properly released.Release the parking brake to switch off the warninglamp, keeping your foot on the brake pedal.Observe the safety recommendations.
For fur ther information on the parking brake, refer to
the "Parking brake" section.
Warning lampis onCauseAction / Observations
Dipped beamheadlampsfixed.The lighting stalk is in the "Dipped
beam headlamps" position.
Main beam headlampsfixed.The lighting stalk is pulled towardsyou. Pull the stalk to return to dipped beam headlamps.

1
Monitoring
27
Warning lampis onCauseAction / Observations
Stop & Start
fixed. When the vehicle stops (red lights,
traffic jams, ...) the Stop & Star t systemhas put the engine into STOP mode. The warnin
g lamp goes off and the engine restarts
automatically in START mode, as soon as you want to move off.

flashes for a few seconds, then goes off.
STOP mode is temporarily unavailable. or
START mode is invoked
automaticall
y. For more in
formation on special cases with STOP mode and STA R T m o d e , r efer to the "Stop & Start"section.
Engine coolanttemperature

fixed blue.On star ting the engine, it indicates
that the engine is cold. After a few minutes driving, it swiches off to indicate
that the engine temperature is normal.
In order to protect your engine, avoid driving too hard
until the warnin
g lamp has switched off.

1
Monitoring
39
The instrument panel remains illuminated with
only the vehicle speed and cruise control or
speed limiter information, if in use.
If there is an aler t or a change in a function
or to a setting, the black panel mode is
interrupted.
Activation
) With the lighting on, press the left handbutton of the instrument panel several
times to progressively reduce the
dashboard lighting level.
) Press the button again to reduce the lighting to the minimum level and switch off
the interior mood lighting.) Press the button again to activate the black
panel.


Black panel
System allowing cer tain displays to be switched
off for night driving.

Activation
When the lighting is on:)press the button to change the brightness
of the instruments and controls, )when the level of brightness required isreached, release the button.
Deactivation

When the lighting is off, or in day mode on
vehicles
fitted with daytime running lamps,pressing the button does not have any effect.

Lighting dimmer
System for manual adjustment of the brightness of the instruments and controls in relation to theexterior brightness.

Multifunction screens
44
Vehicle confi guration
Once the "Vehicle Configuration" menu has
been selected, you can activate or deactivate
the following equipment:
- wiper linked with reverse gear (refer to the"Visibility" section),
- guide-me-home lighting (refer to the"Visibility" section),
- parking sensors (refer to the "Driving"
section).
Options
Once the "Options" menu has been selected,
you can start diagnostics of the status of the
equipment (active, not active, faulty).
Display settings

Once the "Display settings" menu has been selected, you can gain access to the following settings:


- year,

- month,

- day,

- hour,

- minutes,

-
12 or 24 hour mode.
)
Once you have selected a setting, press
the "  " or "
" buttons to change its value.
)
Press the " 
" or "
" buttons to switch
respectively to the previous or next setting.) Press the "OK"
button to save the change
and return to the normal displa
y or press
the "Back"button to cancel.
Setting the date and time)Press the MENUbutton.
)Select "Display settings" using the "
" or "
" button.)Press "OK"
to confirm the selection. )Select the "Year" function using the " "or " " button.)Press "OK"
to confirm the selection. )Choose the desired value, using the " " or "
" button.)Press "OK"
to confirm the selection. )Repeat the procedure to set the "Month",
"Day", " H our s", and " M inute s".

Multifunction screens
48
Example: setting of the duration of the guide-
me-home lighting) Press the " 
" or "
" buttons, then
the "OK"button to select the menurequired.
) Press the " 
" or "
" buttons, then
the "OK"button to select the "Guide-
me-home headlamps" line.
) Press the " " or " " buttons to set thevalue required (15, 30 or 60 seconds), then
press the "OK"button to confirm.
)Press the " 
" or " 
" buttons, then
the "OK"
button to select the "OK"boxand confirm or press the "Back"button to cancel.

"Personalisation-
Confi
guration" menu
Defi ne the vehicle parameters
Once this menu has been selected, you can activate or deactivate the following equipment:
- wiper linked to reverse gear (refer to the "Visibility" section),
- guide-me-home lighting and duration (see "Visibility" section),
- parking sensors (refer to the "Driving" section).
Once this menu has been selected, you can gain access to the following functions:
- define the vehicle parameters,
- display configuration,
- choice of language.