2013 CHRYSLER 300 SRT flat tire

[x] Cancel search: flat tire

Page 418 of 580

CHRYSLER 300 SRT 2013 2.G Owners Manual Tire Loading And Tire Pressure
Tire And Loading Information Placard Location
NOTE:The proper cold tire inflation pressure is listed on
the driver ’s side B-Pillar or the rear edge of the driver’s

Page 419 of 580

CHRYSLER 300 SRT 2013 2.G Owners Manual 3) tire size designed for your vehicle
4) cold tire inflation pressures for the front, rear, and
spare tires.
Loading
The vehicle maximum load on the tire must not exceed
the load carrying capacity of

Page 422 of 580

CHRYSLER 300 SRT 2013 2.G Owners Manual WARNING!
Overloading of your tires is dangerous. Overloading
can cause tire failure, affect vehicle handling, and
increase your stopping distance. Use tires of the
recommended load capacity for your v

Page 423 of 580

CHRYSLER 300 SRT 2013 2.G Owners Manual WARNING!(Continued)
•Unequal tire pressures from one side of the vehicle
to the other can cause the vehicle to drift to the
right or left.
• Always drive with each tire inflated to the recom-
mend

Page 424 of 580

CHRYSLER 300 SRT 2013 2.G Owners Manual At least once a month:
•
Check and adjust tire pressure with a good quality
pocket-type pressure gauge. Do not make a visual judge-
ment when determining proper inflation. Tires may look
properly in

Page 425 of 580

CHRYSLER 300 SRT 2013 2.G Owners Manual Tire Pressures For High Speed Operation
The manufacturer advocates driving at safe speeds and
within posted speed limits. Where speed limits or condi-
tions are such that the vehicle can be driven at

Page 426 of 580

CHRYSLER 300 SRT 2013 2.G Owners Manual Consult an authorized tire dealer for tire repairs and
additional information.
Damaged Run Flat tires, or Run Flat tires that have
experienced a loss of pressure should be replaced imme-
diately with

Page 427 of 580

CHRYSLER 300 SRT 2013 2.G Owners Manual If you need snow tires, select tires equivalent in size and
type to the original equipment tires. Use snow tires only
in sets of four; failure to do so may adversely affect the
safety and handling of