2013 CHRYSLER 300 brake

[x] Cancel search: brake

Page 376 of 592

CHRYSLER 300 2013 2.G Owners Manual Shifting From REVERSE To DRIVE
Bring the vehicle to a complete stop, firmly press the
brake pedal, then pull the shift lever fully rearward and
release when “D” is indicated in the EVIC.
To shift

Page 377 of 592

CHRYSLER 300 2013 2.G Owners Manual •If there is a need to restart the engine, be sure to cycle
the ignition to the OFF position before restarting.
Transmission gear engagement may be delayed after
restarting the engine if the key is

Page 378 of 592

CHRYSLER 300 2013 2.G Owners Manual WARNING!(Continued)
•It is dangerous to shift out of PARK or NEUTRAL
if the engine speed is higher than idle speed. If
your foot is not firmly pressing the brake pedal, the
vehicle could accelerate

Page 379 of 592

CHRYSLER 300 2013 2.G Owners Manual CAUTION!
•Before moving the shift lever out of PARK, you
must cycle the ignition switch from the OFF posi-
tion to the ON/RUN position, and also press the
brake pedal. Otherwise, damage to the shift

Page 382 of 592

CHRYSLER 300 2013 2.G Owners Manual 3. Turn the engine OFF.
4. Wait approximately 30 seconds.
5. Restart the engine.
6. Shift into the desired gear range. If the problem is nolonger detected, the transmission will return to normal
opera

Page 384 of 592

CHRYSLER 300 2013 2.G Owners Manual NOTE:
•After selecting any gear range, wait a moment to allow
the selected gear to engage before accelerating. This is
especially important when the engine is cold.
• If there is a need to restart

Page 385 of 592

CHRYSLER 300 2013 2.G Owners Manual WARNING!(Continued)
•It is dangerous to shift out of PARK or NEUTRAL
if the engine speed is higher than idle speed. If
your foot is not firmly pressing the brake pedal, the
vehicle could accelerate

Page 386 of 592

CHRYSLER 300 2013 2.G Owners Manual CAUTION!
•Before moving the shift lever out of PARK, you
must cycle the ignition switch from the OFF posi-
tion to the ON/RUN position, and also press the
brake pedal. Otherwise, damage to the shift