2013 CHRYSLER 200 parking brake pedal

[x] Cancel search: parking brake pedal

Page 16 of 517

CHRYSLER 200 2013 1.G Owners Manual •For vehicles equipped with the Electronic Vehicle Infor-
mation Center (EVIC), the power window switches,
radio, hands–free system (if equipped), and power out-
lets will remain active for up to

Page 34 of 517

CHRYSLER 200 2013 1.G Owners Manual DOOR LOCKS
Manual Door Locks
To lock each door, push the door lock knob on each door
trim panel downward. To unlock each door, pull the
inside door handle.
WARNING!
•For personal security and safety

Page 298 of 517

CHRYSLER 200 2013 1.G Owners Manual STARTING PROCEDURES
Before starting your vehicle, adjust your seat, adjust the
inside and outside mirrors, fasten your seat belt, and if
present, instruct all other occupants to buckle their seat
belt

Page 304 of 517

CHRYSLER 200 2013 1.G Owners Manual WARNING!(Continued)
•Unintended movement of a vehicle could injure
those in and near the vehicle. As with all vehicles,
you should never exit a vehicle while the engine is
running. Before exiting a

Page 306 of 517

CHRYSLER 200 2013 1.G Owners Manual Gear Ranges
DO NOT race the engine when shifting from PARK or
NEUTRAL into another gear range.
NOTE:After selecting any gear range, wait a moment to
allow the selected gear to engage before accelerati

Page 307 of 517

CHRYSLER 200 2013 1.G Owners Manual WARNING!(Continued)
•It is dangerous to shift out of PARK or NEUTRAL
if the engine speed is higher than idle speed. If
your foot is not firmly pressing the brake pedal, the
vehicle could accelerate

Page 308 of 517

CHRYSLER 200 2013 1.G Owners Manual CAUTION!
•Before moving the shift lever out of PARK, you
must turn the ignition switch from the OFF posi-
tion to the ON/RUN position, and also press the
brake pedal. Otherwise, damage to the shift

Page 315 of 517

CHRYSLER 200 2013 1.G Owners Manual When parking on a hill, apply the parking brake before
placing the shift lever in PARK, otherwise the load on the
transmission locking mechanism may make it difficult to
move the shift lever out of PA
Page:   1-8 9-16 next >