2013 CHRYSLER 200 CONVERTIBLE overheating

CAUTION!
Driving with a hot cooling system could damage
your vehicle. If the pointer rises to the H (red) mark,
the instrument cluster will sound a chime. When
safe, pull over and stop the vehicle with the engine at
idle. Turn off the air conditioning and wait until the
pointer drops back into the normal range. If the
pointer remains on the H (red) mark for more than a
minute, turn the engine off immediately and call for
service.
WARNING!
You or others can be badly burned by hot engine
coolant (antifreeze) or steam from your radiator. If
you see or hear steam coming from under the hood,
do not open the hood until the radiator has had time
(Continued)
WARNING! (Continued)
to cool. Never try to open a cooling system pressure
cap when the radiator or coolant bottle is hot.
Engine Oil Overheating — 2.4L Engine Only (If
Equipped)
During sustained high-speed driving or trailer tow up
long grades on hot day, the engine oil temperature may
become too hot. If this happens, the “HOTOIL” message
flashes, the vehicle speed will be reduced to 53 mph
(85 km/h) until the engine oil temperature is reduced.
NOTE:Engine speed is reduced to 53 mph (85 km/h) at
the maximum. You may of course, reduce your speed
further if needed.
6
WHAT TO DO IN EMERGENCIES 399

CAUTION! (Continued)
battery will discharge sufficiently to degrade battery
life and/or prevent the engine from starting.
FREEING A STUCK VEHICLE
If your vehicle becomes stuck in mud, sand, or snow, it
can often be moved using a rocking motion. Turn the
steering wheel right and left to clear the area around the
front wheels. Then shift back and forth between DRIVE
and REVERSE, while gently pressing the accelerator. Use
the least amount of accelerator pedal pressure to main-
tain the rocking motion, without spinning the wheels, or
racing the engine.
CAUTION!
Racing the engine or spinning the wheels may lead to
transmission overheating and failure. Allow the en-
gine to idle with the shift lever in NEUTRAL for at
least one minute after every five rocking-motion
cycles. This will minimize overheating and reduce
the risk of transmission failure during prolonged
efforts to free a stuck vehicle.
NOTE:Press theESC Offswitch, to place the Electronic
Stability Control (ESC) system inPartial Offmode,
before rocking the vehicle. Refer to “Electronic Brake
Control” in “Starting And Operating” for further infor-
mation. Once the vehicle has been freed, press theESC
Offswitch again to restoreESC Onmode.
6
WHAT TO DO IN EMERGENCIES 415

CAUTION!
•When “rocking” a stuck vehicle by shifting be-
tween DRIVE and REVERSE, do not spin the
wheels faster than 15 mph (24 km/h), or drivetrain
damage may result.
•Revving the engine or spinning the wheels too fast
may lead to transmission overheating and failure.
It can also damage the tires. Do not spin the wheels
above 30 mph (48 km/h) while in gear (no trans-
mission shifting occurring).
WARNING!
Fast spinning tires can be dangerous. Forces gener-
ated by excessive wheel speeds may cause damage, or
even failure, of the axle and tires. A tire could
(Continued)
WARNING! (Continued)
explode and injure someone. Do not spin your vehi-
cle’s wheels faster than 30 mph (48 km/h) or for
longer than 30 seconds continuously without stop-
ping when you are stuck and do not let anyone near
a spinning wheel, no matter what the speed.
SHIFT LEVER OVERRIDE
If a malfunction occurs and the shift lever cannot be
moved out of the PARK position, you can use the
following procedure to temporarily move the shift lever:
1. Turn the engine OFF.
2. Firmly apply the parking brake.
3. Remove the rubber cupholder liner. Squeeze one side
of the liner’s center to expose its edge and facilitate
removal.
416 WHAT TO DO IN EMERGENCIES

CAUTION!
•The catalytic converter requires the use of un-
leaded fuel only. Leaded gasoline will destroy the
effectiveness of the catalyst as an emissions control
device and may seriously reduce engine perfor-
mance and cause serious damage to the engine.
•Damage to the catalytic converter can result if your
vehicle is not kept in proper operating condition.
In the event of engine malfunction, particularly
involving engine misfire or other apparent loss of
performance, have your vehicle serviced promptly.
Continued operation of your vehicle with a severe
malfunction could cause the converter to overheat,
resulting in possible damage to the converter and
vehicle.Under normal operating conditions, the catalytic con-
verter will not require maintenance. However, it is im-
portant to keep the engine properly tuned to assure
proper catalyst operation and prevent possible catalyst
damage.
NOTE:Intentional tampering with emissions control
systems can result in civil penalties being assessed
against you.
In unusual situations involving grossly malfunctioning
engine operation, a scorching odor may suggest severe
and abnormal catalyst overheating. If this occurs, stop
the vehicle, turn off the engine and allow it to cool.
Service, including a tune-up to manufacturer’s specifica-
tions, should be obtained immediately.
440 MAINTAINING YOUR VEHICLE

Electronic Stability Control (ESC)..............336
Electronic Vehicle Information Center (EVIC)......236
Emergency, In Case of
Jacking..............................400
Jump Starting.........................410
Towing..............................417
Emission Control System Maintenance..........426
Engine.................................423
Air Cleaner...........................432
Block Heater..........................304
Break-In Recommendations................90
Checking Oil Level.....................429
Compartment.........................424
Compartment Identification...............424
Coolant (Antifreeze).....................442
Cooling..............................441
Exhaust Gas Caution.....................91
Fuel Requirements......................370
Jump Starting.........................410Oil .................................429
Oil Change Interval.....................227
Oil Filler Cap.........................423
Oil Selection..........................430
Oil Synthetic..........................431
Overheating..........................398
Starting..............................303
Temperature Gauge.....................220
Engine Oil Viscosity.......................431
Engine Oil Viscosity Chart...................431
Enhanced Accident Response Feature............64
Entry System, Illuminated....................21
Ethanol................................371
Event Data Recorder........................68
Exhaust Gas Caution........................91
Exhaust System...........................91
Extender, Seat Belt.........................56
Exterior Lights............................95
502 INDEX

Identification Logo......................430
Materials Added to.....................431
Recommendation.......................430
Synthetic.............................431
Viscosity.............................431
Oil Filter, Selection........................432
Oil Pressure Light.........................222
Onboard Diagnostic System..................425
Opener, Garage Door (HomeLink) ............192
Operating Precautions......................425
Operator Manual (Owner’s Manual).............4
Overheating, Engine.......................398
Owner’s Manual (Operator Manual).............4
Paint Care..............................453
Panic Alarm..............................26
Parking Brake............................328
Passenger Seat Back Tilt (Easy Entry System)......170
Passing Light............................181Personal Settings..........................246
Pets....................................90
Phone, Cellular...........................129
Phone, Hands-Free (Uconnect™)..............129
Placard, Tire and Loading Information..........346
Power
Accessory Delay........................12
Deck Lid Release........................38
Door Locks............................32
Mirrors..............................127
Outlet (Auxiliary Electrical Outlet)..........202
Seats................................166
Steering.............................327
Windows.............................34
Pregnant Women and Seat Belts................56
Preparation for Jacking.....................401
Pretensioners
Seat Belts.............................51
Programmable Electronic Features.............246
10
INDEX 509