2013 CHRYSLER 200 CONVERTIBLE warning

[x] Cancel search: warning

Page 236 of 519

CHRYSLER 200 CONVERTIBLE 2013 1.G Owners Manual 27. Transmission Temperature Warning Light — If
Equipped
This light indicates that the transmission fluid
temperature is running hot. This may occur
with severe usage, such as trailer towing. If thi

Page 239 of 519

CHRYSLER 200 CONVERTIBLE 2013 1.G Owners Manual The EVIC consists of the following:
•Compass Heading Display (N, S, E, W, NE, NW, SE,
SW)
•Mileage (Avg/MPG)•Miles To Empty
•Low Tire Information (Tire Pressure Monitor System
(TPMS) Displays)

Page 241 of 519

CHRYSLER 200 CONVERTIBLE 2013 1.G Owners Manual •SELECT Button
Press and release the SELECT Button to accept
a selection. The SELECT Button also resets
various Trip Functions.
Electronic Vehicle Information Center (EVIC)
Displays
When the appropr

Page 248 of 519

CHRYSLER 200 CONVERTIBLE 2013 1.G Owners Manual EVIC Units Selection (UNITS IN Display)
Displays the units used for the Outside Temperature,
Average Fuel Economy, Distance to Empty and Tire
Pressure features. Press and Release the SELECT button
to

Page 283 of 519

CHRYSLER 200 CONVERTIBLE 2013 1.G Owners Manual track in that list. Not all iPodor external USB device
sub-menu levels are available on this system.
•MUSIC TYPEbutton: TheMUSIC TYPEbutton is
another shortcut button to the genre listing on your
a

Page 303 of 519

CHRYSLER 200 CONVERTIBLE 2013 1.G Owners Manual ▫Spare Tire Matching Original Equipped Tire And
Wheel – If Equipped...................355
▫Compact Spare Tire – If Equipped.........355
▫Full Size Spare – If Equipped.............356
▫Li

Page 305 of 519

CHRYSLER 200 CONVERTIBLE 2013 1.G Owners Manual STARTING PROCEDURES
Before starting your vehicle, adjust your seat, adjust the
inside and outside mirrors, fasten your seat belt, and if
present, instruct all other occupants to buckle their seat
belt

Page 306 of 519

CHRYSLER 200 CONVERTIBLE 2013 1.G Owners Manual starter will disengage automatically in 10 seconds. If this
occurs, turn the ignition switch to the LOCK position,
wait 10 to 15 seconds, then repeat the “Normal Starting”
procedure.
Extreme Cold