5
Power Driver’s SeatA. Lumbar Adjustment
Press the small control to adjust the
lumbar support.
B. 6-way Seat Adjustment
Move the large control to move the seat
forward or rearward and to tilt, raise or
lower the seat.
C. Seatback Recline Adjustment
Lift the lever to adjust the seatback
position.
D. Memory Seat Controls
Seats
See Seats and Restraints in your Owner Manual.
Memory SeatF
Set Memory Positions
1. Adjust the driver’s seat and power outside mirrors to the desired positions.
2. Press and hold the Memory button and button 1 (D) on the outboard side of the driver’s
seat until a beep sounds.
3. Repeat these steps using button 2 for a second driver.
Recall Memory Positions
Press and hold button 1 or 2 until the stored position is reached.
Note: Open Vehicle Settings in the Configuration menu to change the memory seat settings.
Folding Front Passenger Seat
Pull up the recline lever on the outboard side of the passenger’s front seat to fold the
seat flat.
Folding Rear Seats 1. Unbuckle the safety belts and return
them to their normal stowed position.
2. Lower the head restraints.
3. Pull up the tab (A) located at the center
front of the seat cushion.
4. Pull up the rear edge of the seat cush-
ion and tilt it forward.
5. Press the lever (B) on top of the seat-
back. When the red marking is visible,
the seatback is unlatched.
6. Fold down the seatback.
7. When unfolding the seats, make sure
the safety belt buckles are accessible
above the seat cushions.
F Optional equipment
ABC
D
B
A
A
