
14  Instrum ent s and  w arn ing /indic ato r  light s 
tm 
USA models: 
!! 
Battery  in  remote  control  key 
Ant i- lock b raking  system  (ABS) 
¢ page  3 3 
defective  ,/ 
¢ page20 
l:i 
Defective  light  b ulb warn ing 
¢page  22 
I [I] 
Canada  model s: 
Anti-lock  b raking  system  (ABS) 
II 
Rear fog  light(s) 
defective  ,/ 
¢page22 
I ¢page20 
• 
Worn  brake pads 
II 
Headlight  range control 
¢page22 
¢ page  21 
- -
:rm 
Electromechanical  parking  brake 
rll 
adaptive  light * 
¢page22 
¢page  78 
g 
Tire pressure monitoring  system 
m 
Light-/rain  sensor faulty 
¢page 22 
,I 
¢page264 
• 
Audi  active  lane assist* 
lliii~1 Tire pressure monitoring  system  ¢page96 
¢page264  Transmission  (tiptronic ®) 
Electronic  power  contro l ,/ 
rm 
Im 
¢page  114 
¢ page  21 
R1 
Transmission 
I. 
Malfunction  indicator  Lamp (MIL) 
- S tronic®  ¢page  114 
,I 
¢page21 
• 
Electronic  steering  column  lock 
., 
Engine speed limitation  ¢page 
18 
¢ page  21 
., 
Engine start  system 
• 
Engine oil  level  ¢page 
18 
¢page  18 
£1,ij 
Electromechanical  steering  ./ 
• 
Engine oil sensor  ¢
page  201 
¢ page  21 
• 
Air  suspension* 
-1 
Battery  ¢page 
19 
¢page  17 
• 
Sport  differentia l* 
Ill 
Tank system  ¢page 
23 
¢page22 
11 
Rear spoiler 
• 
Windshield  washer  fluid  level  ¢page 
198 
¢page22 
m 
Windshie ld wipers 
¢ page22 
!I 
Remote  control  key 
¢page  75 
m 
Remote  contro l key 
¢ page  78  

20  Instruments  and  warning/indicator  lights 
If  the  battery  te rm inals  were  disconnected 
and  re-connected,  the  vehicle was j ump  sta rt
ed  or the  batte ry is very weak, the  ESC sensor 
system  goes  through  a  learning  process  for 
the  first  few yards.  The warning/ind icator 
light  illuminates . The war ning/ indicato r light 
goes  out  as soon  as the  learning  proc ess  is 
comp lete . 
For more  informat io n  about  t he  ESC 
¢ page  196. 
ABS/( @) Anti-lock  braking  system  (ABS) 
This warning/indicator  light  monitors  the ABS 
and  the  electronic  differ ential  lock  (EDL). 
The warning/indicator  light E (USA mod
e ls) 
;£1 (Canada mode ls) will come  on fo r a 
few seconds  when  the  ignition  is switched  on. 
The  light  will go out  after  an  a utomat ic chec k 
se quence  is completed . 
There  is a malfunction  in the  ABS when : 
-The warning/ indicator  lig ht  d oes  not  ill umi 
nate  whe n you switch  the  ign ition  on. 
- The wa rning/i ndicator  lig ht  does  not  go out 
after  a few seconds . 
- The warning/indicator  lig ht  illumi nates 
wh ile driving. 
T he  ESC ind ic a tor  light  a lso  ill umin ates  if 
the re is a mal func tion  in the  A BS. T he mes 
sage 
Stabilization  control  (ESC/ABS ): Fault! 
See owner's  manual 
a lso  appears  in the  in 
strument  cluster  disp lay and  a warning  tone 
s o unds . 
The brake system will  still  respond even 
without  the  assistance of the  ABS system . 
See your  authorized  Audi  dealer  as soon as  possible to  restore full  braking  performance. 
For more  informat io n  regarding  the  ABS 
¢ page  196. 
Malfunction  in the  brake  system 
If the  brake wa rn ing light ¢ page  15 and the 
ABS warning  ill uminate 
together there  may be 
a  ma lfunction  in the  ABS, and  there  may also 
be a ma lf u nct ion in the  brake system  itself 
c::> /1. . The ABS will  not work  and you will  no- tice a change in braking  respon
se and per
formance . 
In the  even t of a malfunction  in the  brake 
system 
t he warning/ind ic at or ligh t 11111 
(U SA mode ls)/ .  (Canada models)  in  the  in 
str ument  cl uster  flas hes 
c::> page  15 . 
Malfunction  in the  electronic  differential 
lock  (EDL) 
The  E DL works toge ther w it h  the  AB S. T he 
ABS wa rnin g light wi ll come on if there  is a 
malfu nction  in t he  EDL system 
c::> page  196. 
See your author ized Audi dealer  as  soon  as 
poss ib le . 
A WARNING 
-- If  the E (USA  mode ls)/ rl]  (Canada 
mo dels) warning  light  does  not  go ou t, 
or if i t com es on whi le driving, t he ABS 
s y st em  is not wor king pr ope rly.  The vehi 
cle  can the n be  st opped only wit h the 
s ta nda rd  b ra kes  (withou t A BS) . Yo u w ill 
not  have  the  protect ion A BS provides . 
Contact  your Audi dea le r as soon as pos
sible. 
- USA models: If t he 11111 warning  light, 
the 
J_j) wa rnin g light  and t he E warn
ing light  come on together,  the  rear 
wheels  could  lock  up f irst  under  hard 
b rak ing.  Rear wheel  lock-up can ca use 
loss of vehicl e co ntrol  and  an  accident. 
Hav e your ve hicle  repair ed  imm ediat ely 
by y our  authori zed  A udi  deale r or a quali
fi ed  work sh op. Dr ive  slo wly  and  avoid 
sud de n, hard  bra ke  applicat ions. 
-Canada  models: If  the  br ake w arn ing 
ligh t. , the 
G1 wa rning light  a nd  th e 
A BS warning  ligh t 
SJ come  on together, 
the  rear  wheels  could  lock  up first  under 
ha rd  br aking.  Rea r whee l loc k-u p can 
cause  loss  of vehicle con tro l an d an  acci
dent.  Have your veh icle repa ired  immedi 
ately  by your authorized  Audi dealer  or a 
qualified  works hop.  Drive s lowly a nd 
avoid sudde n, hard  b ra ke app lications. 
- 
![AUDI S7 2013  Owners Manual Instrument s and  warnin g/indic ator  ligh ts 21 
(0 ) Worn  brake  pads 
rl] Brak e pad s! 
If the  warn ing  light  illum inates,  immediately 
contact  your authorized  Audi dealer  or quali
fie AUDI S7 2013  Owners Manual Instrument s and  warnin g/indic ator  ligh ts 21 
(0 ) Worn  brake  pads 
rl] Brak e pad s! 
If the  warn ing  light  illum inates,  immediately 
contact  your authorized  Audi dealer  or quali
fie](/manual-img/6/57603/w960_57603-22.png)
Instrument s and  warnin g/indic ator  ligh ts 21 
(0 ) Worn  brake  pads 
rl] Brak e pad s! 
If the  warn ing  light  illum inates,  immediately 
contact  your authorized  Audi dealer  or quali
fied workshop  to  have all brake pads  inspect
ed.  On USA models  the  wa rning  light 
rl] 
comes  on togethe r with the  warn ing  light 
.. . Both sets  of  b rake pads  on an  axle 
must  always be  replaced  at  the  same  time . 
~ WARNING 
Driving with  bad  brakes  can cause  a coll i
sion and  serious  personal  injury. 
- If the  warning  light rl] and  the  wa rning 
light  .. 
1> with the  message Bra ke 
pads ! 
comes  on in the  instrument  cluster 
display,  immediately  contact  your au
thorized  Aud i dea ler  or qualified  work
shop  to  have all brake  pads  checked  or 
replaced  if necessary . 
EPC Electronic  power  control 
This warning/indicator  light  monitors  the 
electronic  power  control . 
The Im warning/ indicator  light  (Electron ic 
Power Control) illuminates  when you switch 
the  ignition  on as  a function  check . 
(!) Tips 
If this wa rning/indicator  light  ill uminates 
while you are  dr iving, then  there  is a mal
function  in the  engine  electron ics . Have 
the  malfunction  co rrected  as  soon  as  pos
sible  by you r autho rized Aud i dea le r  or 
qua lified  repair  fa cility. 
o Malfunction  Indicator  Lamp  (MIL) 
The Malfunc tion Ind icator  Lamp (M IL) is par t 
of the  On -Boa rd  Diagnostic  (OB D II) system. 
The  symbol ¢• tights  up when  the  ignition  is 
switched  on and w ill tur n off after  the  engine 
has  started  and  has  sett led  at  a constant  id le 
1 )  - : USA mod els on ly 
-
speed.  This indicates  that  the  M IL is work ing 
properly . 
T he wa rni ng  lig ht  ill uminates  w hen  the re  is  a 
malfu nction  in t he engine  electron ic system . 
Contact  your a uth orized Audi dea ler and  have 
the  malfunction  corrected . 
An  imprope rly  closed  fuel  fille r cap may a lso 
ca use  the  M IL light  to  illuminate~ 
page  2 2 7 . 
Fo r more  information ~ page  29. 
!?) Engine  speed  limitation 
App lies  to vehicles: wit h eng ine speed  limitat ion 
(I! Engine  sp ee d maximum  XXXX RPM 
The eng ine speed  is automatically  limited  to 
the  speed  d isplayed  in the  driver information 
system.  Th is protects  the  engine  from  over
heating. 
The eng ine speed  limitation  deactivates  once 
the  engine  is no longer  in the  critical tempera
tu re  range  and you have re leased  the  accelera
tor  pedal  once. 
If the  engine  speed  limitation  was  activated 
by an  engine  control  malfunction,  the  indica
tor  light 
Im a lso tu rns on.  Make sure  that  the 
speed  does  not  go above  the  speed  disp layed. 
Drive  to your authori zed A udi dealer  immedi 
ate ly  to have  the  ma lfunction  corrected. 
~.  Engine  oil  level 
II Add oil,  max.  x qt  (l).  You may continue 
dri ving 
When  the  symbol II and  driver message  ap
pear,  add  the amount  of oil appearing  in the 
display at  the  next  opportunity ~ 
page  235. 
~tt• Engine  oil  sensor 
Ill Oil  level! Sensor defective 
If the  symbol  illumina tes,  contact  yo ur au 
thorized  Audi dea ler and  have the  oil sensor 
inspected.  Until yo u have this  done,  check the  .,..  

86  Audi adapti ve  cruise  control  and  bra king  gu ard 
Audi  adaptive  cruise 
control  and  braking 
guard 
Introduction 
App lies  to  vehicles:  with  Audi adaptive  cruise  co ntrol 
The  adaptive  cruise  control  system  assists  the 
driver  by regu lat ing  vehicle  speed  and  helping 
to  maintain  a set  distance  to  the  vehicle 
ahead,  within  the  limits  of the  system. 
If the 
system  detects  a  moving  vehicle  up ahead, 
adaptive  cruise  control  can  brake and  then  ac
celerate  your  vehicle.  This  helps  to  make  driv
ing  more  comfortable  both  on long highway 
stretches  and  in stop-and-go  traffic. 
The  braking  guard  system can  warn  you  about 
an  impending  collision  and  initiate braking 
maneuvers 
c:::> page 92. 
Adaptive  cruise  control  and  braking  guard 
have  technical  limitations  that you  must 
know,  so please  read  this  section  carefully,  un
derstand  how  the  system  works  and  use them 
properly  at  all  times. 
General  information 
General  information 
Applies to  vehicles:  with  Audi adaptive  cruise  co ntrol 
Fig. 86 Front  of  the  veh icle:  sensors  and video  camera 
The areas  that  conta in the  radar  and  ultrason
ic sensors  and  the  v ideo  camera 
c:::> fig. 86 
must  neve r be  cove red  by stic kers  or  other  ob
jects  or  obstructed  w ith  dirt,  insects,  snow  or 
i ce that  will  interfere with  the  adaptive  cruise 
control  system  and  braking  guard.  For  infor
mation  on  cleaning,  refer  to 
c:::> page 216. The same  applies  for  any  modifications  made  in 
the  front  area. 
T he  function  of  the  adaptive  cru ise  contro l 
system  and  braking  guard  is limited  under 
some  cond itions: 
- Objects  can  only  be  de tected  when  they  are 
w ith in sensor  range 
c:::> fig . 89. 
-The  system  has  a  limited  ability  to  detect 
objects  that  are  a  short  d istance  ahead,  off 
to  the  side  of your  vehi cle  or  mov ing  into 
your  lane. 
- Some  kinds  of ve hicles  are  hard  to  detect; 
for  examp le  motorcycles,  veh icles  with  high 
ground  clearance  or  overhanging  loads  may 
be  detected  when  it is too  late  or  they  may 
not  be  detected  at all. 
-When  driving through  curves 
c!,>page 87 . 
-Stat ionary  objec ts c:::> page 87. 
& WARNING 
A lways  pay  attention  to  traffic  when  adap 
tive  cruise  contro l is switched  on  and  brak
ing  g uard  is  active.  As the  dr iver, you  are 
still  respons ible  for  starting  and  for  main
taining  speed  and  distance  to  other  ob
jects.  Braking  guard  is  used  to  assist  you . 
The dr iver  must  a lways  take  action  to  avo id 
a  collis ion . The  driver  is a lways  respons ible 
fo r braking  a t the  co rrec t time. 
- Imp roper  use  of  adaptive  cru ise  control 
can  cause  collisions,  other  acc idents  and 
serious  pe rsonal  in jury. 
- Never  let  the  comfort  and  convenience 
that  adaptive  cruise  control  and  braking  gua rd offer  d istract  you  from  the  need  to 
be  alert  to  traffic  condit ions  and  the 
need  to  rema in  in fu ll control  of your  ve
h icle  at  a ll times, 
- Always remember  that  the  adaptive 
cruise  control  and  braking  guard  have 
limits  -they  will not  s low  the  vehicle 
down  or  maintain  the  set distance  when 
you  drive  towards  an obstacle  or  some
thing  on  or  near  the road  that is  not 
mov ing,  such  as  vehicles  stopped  in  a 
traffic  jam,  a stalled  o r disabled  vehicle. 
I f  registered  by the  radar  sensors,  

Audi adapt ive crui se  c ontrol  an d  bra kin g guard  8 7 
vehicles  or  obstacles  that  are  not  moving 
can  trigger  a  collision  warning  and  if con
firmed  by the  video  camera,  an  acute  col lis ion  warn ing. 
- For safety  reasons,  do  not  use  adaptive 
cruise  control  when  driving  on  roads  with 
many  curves,  when  the  road  surface  is  in 
poor  condit ion  and/or  in bad  weather 
(such  as  ice,  fog,  gravel,  heavy  rain  and 
hydroplan ing).  Using the  system  under 
these  cond itions  cou ld  result  in a  co lli 
sion . 
- Switch  adaptive  c ruise  control  off  tempo
rar ily when  driv ing  in turning  lanes,  on 
expressway  exits  or  in construction 
zones . This  prevents  the  vehicle  from  ac
celerating  to  the  set  speed  when  in these 
situations . 
- The  adapt ive cru ise  control  system  w ill 
not  brake  by itse lf  if you  put  your  foot  on 
the  accelerator  pedal.  Doing  so  can  over ride  the  speed  and  distance  regulation . 
- When  approaching  stationary  objects  such  as  stopped  traffic,  adaptive  cruise 
control  will  not  respond  and  braking 
guard  w ill have  limited  function. 
- The  adapt ive cruise  control  system  and 
braking  guard  do  not  react  to  people , an
ima ls,  objects  crossing  the  road  o r on
coming  objects . 
- The function  of the  radar  sensors  can  be 
affected  by reflective  objects  such  as 
guard  ra ils,  the  entra nce  to  a tunnel, 
he avy rain  or  i ce. 
- Never  follow  a veh icle  so  closely  that  you 
cannot  stop  your  vehicle  safe ly. The 
adaptive  cruise  cont ro l c anno t slow  or 
brake  the  veh icle  safely  when  you  follow 
another  vehicle  too  closely.  Always  re
member  that  the  automatic  braking 
funct ion  cannot  bring  the  veh icle  to  a 
sudden  or  emergency  stop  under  these 
condit ions . 
- To  prevent  unintended  operation,  always 
switch  ACC off  when  it  is  not  be ing  used. (D Note 
The  sensors  can  be  displaced  by impacts  or 
damage  to  the  bumper,  wheel  housing  and 
underbody.  That  cou ld  affect  the  adaptive 
cruise  control  system  and  brak ing  guard . 
Have your  authorized  Aud i dea le r or  a u
thorized  Audi Serv ice  Facility check  their 
funct ion. 
In curves 
Applies  to vehicles:  with  Audi adaptive  cruise  control 
I 
F ig.  8 7 Exampl e: dri vin g in to  a  curve 
When  dr iving  into  a  curve c:> fig. 87 and  out  of 
a  cu rve, the  ad aptive  cruise  con trol  m ay react 
to  a vehicle  in the  next  lane  and  apply  the 
brakes . You can  override  or  prevent  the  brak
i ng  by pressing  the  accelerator  pedal  b riefly. 
Stationary  objects 
Applies  to  vehicles:  with  Audi adaptive  cruise  control 
Fig.  88 Ex ampl e: object  chang ing  l anes  and s ta tio nar y 
objec t 
The  adaptive  cru ise  con tro l system  only  reacts 
to  objects  that  a re  mov ing  o r th at  the  system 
has  a lready  detected  as  moving . For examp le, 
if a  veh icle @, which  has  a lready  been  detect-
ed  by the  adaptive  c ruise  contro l, tu rns  o r 
changes  lane s and  another  stationary  vehicle  .,._  

92  Audi adaptive  cruise  control  and braking  guard 
Audi  braking  guard 
Descript ion 
App lies to vehicles: with  Audi adap tive  cruise  control 
Fig.  96 Instrument  cluster:  approach warn ing 
Braking  guard  uses radar  sensors and  a video 
camera . It  also functions  within  the  limits  of 
the  system  when  adapt ive cruise control  is 
switched  off . 
What  can braking  guard  do? 
When detected  in time,  the  system  can assess 
situations  when  a vehicle  ahead brakes sud
denly  or  if your  own vehicle  is traveling  at  a 
high  speed and  approaching  a vehicle  up 
ahead that  is moving  more  slowly . Brak ing 
guard  does  not  react if  it  cannot  detect  the 
situation . 
The system  advises you of  various  situations: 
- The 
distance  warning is given  if you  are too 
close to  the  vehicle  ahead  for a long  time.  If 
the  vehicle  ahead brakes sharply,  you will  not  be able to  avoid a collision . The indicator 
light 
I in the  display  comes on . 
- The 
approach  warning is given when  a de
tected  veh icle up ahead in your  lane  is mov 
i ng much  more  slowly  than  you  are or  if  it 
brakes sharply . When  this  warning  is given, 
it  may  only  be possible  to avoid a  collision 
by  swerving  or  braking sharply. Th e indicator 
light 
I and  indicato r in  the  display  will  warn 
you  about  the  danger¢ 
fig. 96. You will  a lso 
hear an acoustic  signal. 
If  you do not  react  fast enough  or  do  not react 
at  all  to  the  situation,  braking  guard  will inter-
ll This  is  not  ava ilable  in some  co un tri es . 
vene by  braking and the message braking 
guard  intervention 
wi ll appear. 
- If  a coll is ion  is imm inent,  the  system  wi ll 
fi rst  prov ide an 
acute  warning by briefly  and 
sharply  applying  the  brakes. 
- If  you  do not  react  to  the  acute warning, 
braking  guard  can brake with  increas ing 
force  within  the  limits  of  the  system . This 
reduces the  vehicle  speed  in the  event  of  a 
collision. 
- The system  can initiate  maximum  braking 
short ly before  a co llision
1l .  Full  deceleration 
at  high  speeds occurs  only  in vehicles with 
adaptive  cruise control  and side assist  (pre 
sense plus) . 
- If  the  braking  guard  senses that  you are  not 
braking  hard enough  when  a collision  is  im
m inent,  it  can  increase the  braking  force . 
- The pre sense functions  also engage when  a 
collision  is  imminent¢ 
page  194. 
Which  function s can  be controlled? 
You can switch  braking guard  and the  dis
tance/approach  warning  on or  off  in the  MMI 
i=> page  93,  Settings  in  the  MMI. 
A WARNING 
-
Lack  of  attention  can cause collisions,  oth-
er accidents  and serious  personal  injuries. 
The braking  guard  is an assist system  and 
cannot  prevent  a collision  by itself . The 
driver  must  always intervene.  The dr iver is 
a lways respons ible for  braking  at the  cor
rect  time. 
- Always  pay close attention  to traffic, 
even when  the  braking  guard  is switched 
on.  Be  ready to  intervene  and  be ready to 
take  complete  control  whenever  necessa
ry. Always  keep the  safe and  legal  dis
tance  between  your  veh icle and vehicles 
up ahead. 
- Braking  guard  works  within  limits  and 
will  not  respond  outside  the  system  lim
its,  for  example  when  approaching  a 
stopped  vehicle  or  stationary  obstacle  ..,.  

Audi  adaptive  cru ise  control  and  brakin g guar d  93 
(end of  a traffic  jam  or veh icle t hat  has 
br oken  down  in traffic). 
- Alw ays remember  that  the  radar sensor 
for  the  b raking  guard works  only  within 
defined  detection  and ra nge limits  that 
may prev ent  the  proper  det ection  of  oth
er ve hicles. 
- The ra dar sensor's function  and range 
can be reduced by rain,  snow and  heavy 
spray. Moving  vehicles  up ahead may not 
be promptly  detected  or  may not  be de
tected  at  al l. 
- Reflective  surfaces  includ ing crash barr i
ers or tunnel  ent rances may  impair  the 
function  of  the radar sensor. 
(0 Tips 
- You can cance l the  braking  w ith  increas
i ng fo rce that  is  initiated  by the  system 
by braking  yo urself,  by accelerating  no
ticeab ly or  by swerving. 
- Brak ing guard  error  messages 
<=> page 93. 
-Keep in  mind  that braking  guard  can 
brake unexpectedly.  Always secure any 
ca rgo or  objec ts that  you are  transport 
i ng to  reduce t he  risk of  d amage o r in
Ju ry. 
Settings  in the  MMI 
Appl ies to  vehicles:  with  Audi  adaptive  cruise co ntrol 
~ Se lect:  ICARlf unct ion  button> ( Car )*  sys
tems 
contro l button  > D river  assi st > Audi 
braking  guard . 
System  -
Switch  braking  g ua rd On and Off . 
When you  sw itch  the  ignition  on,  the  message 
Audi  braking  guard  off appears  if  the  system 
is switched  off. 
Early warning  -The distance  and approac h 
warn ings  in the  display  can be switched 
On / 
Off . 
(D Tips 
- Your settings  are automatically  stored 
and assigned  to  the  remote  control  key  being  used at  the  time  the  settings 
are 
ma de. 
- If you  switch  the  ES C to  spo rt mode, 
braking  g uard switches  off  a utomatica lly 
<=>page 198. 
- Switch  braking  guard  off  when you a re 
loading  the  vehicle  onto  a vehicle  carrier, 
t rain,  ship o r other  type  of  transporta
t ion. This can prevent  undesired  warn
ings from  the  braking  guard  system. 
Messages 
App lies to  vehicles : wit h Audi ada ptive c ruise contro l 
ACC unavail able 
ACC and  braking  guard:  unavailable 
T he system  cannot  detect  mov ing vehicles  up 
ahead  co rrec tly  and  is switched  off.  The sen
sors have been  displaced or  a re  not  worki ng 
properly . The Audi  pre sense  func tions  may a l
so be affected.  Drive to  yo ur autho rized Audi 
dealer  or  authorized  A udi se rvice facility  im
med iate ly to  have the  malfunction  corrected. 
ACC: unavailable  at  this  time.  No sensor  vi
sion 
ACC and  braking  guide:  unavailable  at  this 
time . No  sensor vision 
Th is message appears if  the  senso r view is ob
structed,  for  examp le by leaves, snow,  heavy 
sp ray or  d irt.  C lean the  sensors<=> 
fig. 86 . 
ACC: unava ilabl e at  this  time . Inclin e too 
steep 
The road  exceeds the  max imum  possible  an
gle for  proper  adaptive  cru ise control  opera
tion.  Adaptive  cru ise con tro l is switched  off . 
ACC: only  selector  lever  positions  D , S or  M 
available 
Se lect t he  D/S  or  M selector  leve r pos ition. 
ACC: unavailabl e at  this  time . Parking  brake 
s et 
The adaptive  cr uise cont rol  system  switches 
off  automatically  if  the  park ing b rake is set.  ..,.  

128  Homelink® 
Homelink® 
Universal  remote 
control 
General  information 
Applies  to  vehicles:  with  Homelink®  unive rsal  remote 
co ntrol 
The Homelink  universal  remote  control  can 
be programmed  with  hand-held  transmitters 
from  existing  equipment. 
With  Homelink,  you  can  control devices  such 
as  the  garage  door,  security  systems,  house  lights,  etc.  comfortably  from  the  inside  of you 
vehicle. 
H omelink  makes  it  possible  for you  to rep lace 
three  different  remote  controls  from  devices  in your  home  with  one  universal  remote . Th is 
feature  works  for  most  garage  door  and  exte rior  door  moto r signals.  Programming  the  in
d iv idual  remo te control  fo r you r remote  con 
trol  takes  p lace  near  the  center  of the  radiator 
grille.  There  is a  control  module  attached  at 
this  location . 
A one-t ime  programm ing  of  the  sensor  mus t 
be  performed  before  you  are  able  to  use  sys
tems  w ith  Homelink. 
A WARNING 
- Never  use  the  Homelink ® transmitter 
with  any  garage  door  opener  that  does  have  not  the  safety  stop  and  reverse  fea
ture  as  required  by  federa l safety  stand
ards.  This  includes  any  garage  door  open
er  mode l manufact ured  before  April  1, 
1982. 
- A garage  door  opener  which  cannot  de
tect  an  object,  signaling  the  door  to  stop 
and  reverse  does  not  meet  cur rent  feder
al  safety  s tandar ds.  Us ing  a  garage  doo r 
o pener  witho ut  these  fea tures  in creases 
risk of  serious  inj ury or  death. 
- F or safe ty reasons  never  release  t he 
parking  brake  or  s tart  the  engine  while 
anyone  is standing  in front  of the  vehicle . 
- A garage  door  or  an  est ate  gate  may 
sometimes  be  set  in  motion  when  the  Homelink
® remote  control  is  being  pro
grammed.  If  the  device  is  repeatedly  ac 
tivated,  this  can  overstrain  motor  and 
damage  its  electrica l components  - an 
overheated  motor  is a fire  hazard! 
- To avo id  possible  injuries  or  property 
damage,  please  always  make  absolutely 
certa in that  no  persons  or  objects  are  lo
cated  in the  rang e of  motion  of any 
equ ipme nt  bei ng  ope rated. 
(0 Tips 
- If you  would  like add itional  information 
on  the  Home  Link® Unive rsal  Transce iver, 
Homelink  compatib le  p roducts,  or to 
purc hase  other  accessories  s uch as  the 
HomeL ink® Light ing  Package,  please 
contact  Homelink  at  1-800 -355 -3515  o r 
on  the  Internet  at  www.homelink .com. 
- For  Declaration  of  Comp liance  to  Unite d 
States  FCC and  Ind ustry  Canada  reg ula 
tions 
¢ page  292. 
- For security  reasons,  we  recommend  that 
you  clear  the  programmed  b uttons  be
fore  selling  the  vehicle . 
Operation 
Applies  to  vehicles:  wit h Ho meli nk 
Fig . 14 5 Headliner:  controls 
M 0 
9 (!) 
~ 
Requi rement:  The  bu tto ns  must  be  program
med 
¢ page  129 . 
"' To open  the  garage  doo r,  press  the  pro
grammed  b utton.  The  LED  @ will  light  up  o r 
flash. 
"'  To close  the  ga rage  doo r,  press  the  button 
aga in . 
Ill>