2013 AUDI A8 trip computer

Instrument s and warning /indicator lights 23
@ Tips
For more information on the turn signals,
refer to
c::> page 47.
Driver information
display
Overview
Fig. 4 Driver information system in t he instr ument
cluste r
Fig. 5 Display: exa mple of th e in forma tion line
The driver information system contains infor­
mation
® that is displayed on tabs ®
c::;, fig. 4. The following content is possible de­
pending on vehicle equipment:
®
Tab
1
®
Content
Vehicle functions :
On-board computer c::;, page 24
Digital speedometer
Cruise control*
c::;, page 90
Adaptive cru ise control and braking
guard*
c::> page 93
Audi lane assist* c::;,page 102
Display darkened
-
® ®
Tab Content
2 Indicator lights and messages
Warn ing when a door, the hood or
the rear lid is not closed
c::;, page 2 8
Service interval display c::;, page 2 7
Speed warning system
c::;, page 90
3 Night vision assistant* c::;, page 112
~
I
4 Audio/video
5 Telephone*
6 Navigation*
The second and third tabs are only visible if at
least one indicator light or message is shown
or if that system is switched on .
The status line © is located in the bottom
part of the disp lay
c::;, fig. 4. It displays the ex­
terior temperature, time, selector lever posi­
tion, trip odometer and odometer .
For some vehicle functions, you can access the
trip information from the temporary memory
c::;, page 24 in the line (!)¢ fig. 5.
&_ WARNING
--
- Never rely exclusively on the outside
temperature display to determine if a
road surface is icy or not. Keep in mind
that road surfaces, especially bridges
and overpasses, could be ice cove red and
slippery even at an outside temperatu re
above 41
Of (+5 °().
-Always remember, even if the "snow­
f la ke" symbo l (ice warning) does not ap­
pear in the disp lay, black ice could be on
the road.
-Always reduce your speed and drive with
special care in cold weather cond itions
when the chance of encountering icy road surfaces increases.
(j) Tips
- At temperatures below 14 °F (+ 5 °() a
snowf lake symbol appears ahead of the
temperature display.
It is intended to re-
mind the driver to pay special attention
~

24 Instruments and warning /indicator lights
to ice on the road ¢ & . If the vehi cle is
stationary, o r if you are dr iving at a very
l ow speed, the tempe rat ure shown in the
display might be slightly higher t han the
actua l o utside temperature. This is
ca used by the heat being rad iated from
t h e eng ine.
- You can se lect the un its used for temper ­
atu re, speed a nd other measurements in
the MMI.
- Fo r informat ion on the a udio/video and
nav iga tion* functions, refer to the sepa­
r ate MMI owner's manual.
Operation
The driver information system is operated us­
ing the buttons on the multifunction steering
wheel.
ffi
------,±.
~
Fig. 6 Multifunct ion steer ing wheel: operating "the driv­
e r info rmatio n system
Fi g. 7 Driver infor mat ion syste m: opening t he ve hicle
functio ns me nu
Operating concept
.. Swi tch the ignition on.
.. To sw itch between the tabs, press the ro ck­
er switch @to the left or righ t
c:::> fig. 6.
.. To access addi tio nal in fo rmat ion be low or
above, rotate t he thumbw heel @ dow n or
up. ..
To confirm a select ion, press t he thumb­
wheel @.
Accessing Vehicle functions
.. Sele ct the first tab wit h the ro cker swi tch
@ .
.. Press t he bu tton l==L Th e Vehicle functions
menu a ppears c:::> fig . 7.
.. To se lect a menu item, tu rn and press t he
thumbwhee l
®·
Resetting values to zero
.. Sele ct the on-board computer / Efficiency
program
menu item in the Vehicle func­
tions
men u.
.. Yo u can now select between the long-term
memory and short-term memory.
.. To reset the values in a memory, press and
hold th e thumbw heel @ for one second.
The last function selected d isp lays when you
switch the ignition on .
On-board computer
You can ca ll up the fo llowi ng i nformation in
the on -boar d computer:
- Dat e
- Dr iv ing t ime (h) fro m the short-term memo-
ry
- Average consumption in MPG ( l/100 km)
from the short-te rm memory
- Average speed i n mph (km/h) from the
short-te rm memory
- Distance driven in miles (km) from the
short-term memory
- Current fuel consumption in MPG ( l/100
km)
- Short-term memory overview
- Long-te rm memory ove rview
T he short-te rm memory collec ts dr iv ing in for­
mation from the time the ig nition is switched
o n unti l it is switched off. If you continue driv­
ing within two ho urs after switch ing the ign i­
tion off, the new values are incl uded when cal­
cu lating the cu rrent trip information .
Unli ke the short-term memory , the long-term
memo ry is not erased automatically. Yo u can ..,.

Instrument s and warning /indicator lights 25
select the time period for evaluat ing trip in­
formation yourself.
F or some veh icle functions, you can access the
t r ip information from the temporary memory
in the
line @~page23, fig. 5.
The current fuel consumpt ion can be dis­
p la yed using a bar ~
page 26, fig. 10. The
average consumption (mpg) stored in the
short-term memory is also displayed. Electri­
cal energy can be stored in the battery when
the vehicle is coast ing or driving downhill (re­
cuperation) . The bar will move toward D.
Efficiency program*
The eff ic iency program can help you to use
l ess fuel.
It evaluates driving information in
reference to fue l consumption and shows oth ­
er equipment influencing consumption as well
as shift recommendations.
q page 25. Fuel
economy messages
q page 25 provide tips
for efficient driving. The effic iency program
uses distance and consumption data from tr ip
computer
1.
To display the efficiency program, call up Ve­
hicle functions and select the menu option
Efficiency prog ram . If the data are deleted in
the efficiency program, those values are also
reset in trip computer.
(D Tips
- All stored values w ill be lost if the veh i­
cle battery is disconnected.
- Fuel consumptions (average and cur­ rent), range and speed are displayed in
metric units on Canadian models.
Other equipment
Applies to vehicles: with efficiency program
Fig. 8 Trip computer: ot her equipment
Requirement: The efficiency program must be
displayed
q page 25.
.,. Turn the thumbwheel until the other equip-
ment appears in the display .
Other equipment that is currently affecting
fuel consumption is listed in the efficiency program . The display shows up to three other
items of equipment @. The equ ipment using
the most fuel is listed first. If more than three
items using fuel are switched on, the equip­
ment that is currently using the most fuel is
displayed .
A scale ® also shows the current total con­
sump tion of all other equipment.
Fuel economy messages
App lies to vehicles: with efficiency program
Fig. 9 Disp lay : example o f a fu el econo my m essa ge
Fuel economy messages are displayed when
fuel consumption is increased by certain con­
ditions. If you follow these fuel economy mes­
sages, you can reduce your vehicle's consump­
tion of fuel. The messages appear automati-
cally and are only displayed in the efficiency
111,,

26 Instruments and warning/indicator lights
program. The fuel economy messages turn off
automatically after a certain period of time.
.,. To turn an economy message off immedi-
ately after it appears, press any button on
the multifunction steering wheel.
@ Tips
- Once you have turned a fuel economy
message off, it will only appear again af­
ter you turn the ignition on again.
- The fuel economy messages are not dis­
played in every instance, but rather in in­
tervals over a period of time.
Cylinder on demand System
Applies to vehicles: with 4.0 TFSJ engine
Fig. 10 Instrument duster: fuel consumption
To save fuel, the engine automatically turns
four cylinders on or off, depending on the
amount of power needed. This action is not
felt by the passengers.
Displaying cylinder mode
Requirement: the on-board computer is dis­
played
~ page 24.
.,. Turn the thumbwheel until the current fuel
consumption display is shown in the instru­
ment cluster.
If the green bar is displayed,
you are driving in 4-cylinder mode.
Basic requirements for 4-cylinder mode
4-cylinder drive mode is used automatically if
certain basic requirements are fulfilled. These
include:
- A low power output requirement.
- Driving in third gear or higher.
- Engine speed between 960 and 3,500 RPM. - A warm engine.
Odometer
Fig. 11 Instrument cluster Odometer and
reset button
The odometer shows you how many miles
(kilometers) you have driven. You can switch
the display from miles to kilometers and vice
versa via the MMI.
Upper odometer
The trip odometer shows the distance driven
since it was last reset. It can be used to meas­
ure short distances. The last digit indicates
1/10 of a mile (100 meters).
You can reset the trip odometer to zero by
pressing the Reset button
Efil.
Lower odometer
The lower odometer shows the total number
of miles (kilometers) driven.
Malfunction message
If there is a malfunction in the instrument
cluster,
DEF will appear in the trip odometer
display area. Contact your authorized Audi
dealer to have the problem corrected .
Time and date display
Fig. 12 Center console: analog clock