2013 AUDI A7 lock

40 Opening and clo sing
- When the vehicle is locked, the rear lid
can be un locked separate ly by pressing
the button ~ on the master key. W hen
the rear lid is closed aga in, it locks auto­
matically.
Rear lid emergency release
The rear lid con be released in on emergency
from the inside.
F ig . 28 Rear l id inter ior
., Remove the mechanical key ~page 33 .
., Remove the cover w ith the mechan ica l key
from the rear lid
~ fig . 28 .
!:l 0 9 C)
"' a,
., Press the lever in the direc tion of the arrow
u ntil the rear lid releases.
Child safety lock for
the rear doors
The power child safety lock locks the rear win­
dows and prevent the rear doors from being
opened from the inside .
Fig. 29 Section from driver's door : child safety lock
b u tto ns
., To activate the child safety lock for the left/
right rear door, press the left/right button
[I
in the driver's doo r Q fig. 29. The light in the
button w ill tu rn on. .,
To deact ivate the child safe ty lock for the
left/right rear door, press the left/right but­
ton
[I in the dr iver's door . The light in the
button turns off.
T he following features are switched off:
- The inte rior door hand les in the rear doors,
- The power w indows in the rear doo rs,
- The inte rior lighting buttons .
In order to activate the ch ild safety lock on
the left and the r ight side , press the two safe­
ty buttons
[I in succession.
Power windows
Controls
The driver con control all power windows .
Fig. 3 0 Sect ion o f the d river ·s doo r: Con trols
All power window switches a re p rovided with
a two-position function :
Opening the windows
., Press t he swi tch to the first stop and ho ld it
until the w indow reaches the desired posi­
tion .
., Press t he switch briefly to the
se cond stop
to automatically open the window .
Closing the windows
., Pull the switch to the firs t stop and hold it
until the window re aches the desired posi­
t ion.
., Pull the switch briefly to the
se cond stop to
automatically close the w indow .
Power window switches
@ Driver's door

@ Passenger's door
© Left rear door
@ Right rea r doo r
_& WARNING
-When you leave your veh icle -even if on­
ly briefly -always take the ignition key
with you . This applies partic ularly when
children remain in the vehicle . Otherwise
the ch ildren could start the engine or op­
erate electrical equ ipment (e.g. power
windows). The power windows are func­
t ional until the driver's door or passeng ­
er's door has been opened .
- Be careful when closing the wi ndows .
Check to see that no one is in the way, or
serious injury could result!
- When locking the veh icle from outs ide,
the vehicle must be unoccu pied s ince the
windows ca n no longer be opened i n an
eme rgency .
(0 Tips
- When you ope n the doors, the w indows
a utomat ica lly low er about 10 mm .
- When the window in the dr iver's or pas­
senger's door is completely open, it will
r aise approximate ly 25 mm when the
door is opened. The w indow will lower
again w hen you close the doo r.
- After the ignition has been switched off,
t h e windows can still be opened o r
closed for abou t 10 minu tes. The powe r
windows are not swi tched off un til the
drive r's door or passenge r's door has
been opened .
What to do after a malfunction
The one-touch open and close function must
be reactivated if the battery hos been discon ­
nected.
.. Pull and hold the power w indow switch un ­
t il the window is fully closed .
.. Re lease the switch and then p ull it again for
at least one second .
Opening and clo sin g 41
Valet parking
The valet parking feature protects the lug­
gage compor tment from unauthori zed access
from the outside.
Fig . 3 1 Luggage compa rt m en t: va let pa rk in g b utto n
With "valet parking " act ivated, the rear lid
cannot be opened from the ou tside.
.. Remove the mechan ical key ¢
page 33 .
.,. Open the glove compartment and activate
¢
fig. 31 the "valet parking " feature by
press ing the
lVALE TI button . The indi cat o r
light in the sw itch ill umi nates .
.. Close the glove compartment and lock it
with the mechanica l key.
.. Leave the master key with the se rvice per­
sonne l for park ing and keep the mechanica l
key with you.
When the "va let parking" feature is activated:
- t he unlocki ng but ton fo r th e rear lid
~ in
t he driver's door is inact ive
- t he button
~ on the mas ter key is inac tive
- the opening handle in the rear lid is inact ive .
The vehicle can be driven and locked and un­ l ocked with t he master key . Access to the lug ­
gage compar tment is b locked from the out­
s ide .
When the valet park ing function is switched
o n, the message
Valet parking activated ap­
pears in the inst rument cluste r display wh en
you sw itch the ignition on .

Automatic headlights
You can adjust the following settings in the
Automatic headlights menu:
Headlights activation time -You can adjust if
the headlights switch on
Early, Med . or Late
according to the sensitivity of the ligh t sensor.
Audi adaptive light* -You can switch adaptive
light
On and Off.
Daytime running lights
USA models:
You can switch the dayt ime run­
n ing lights
on and off .
Canada models :
The function cannot be
turned off . It is activated automatically each
time the ignition is switched on. This menu
item is shown "greyed out" .
Coming home, Leaving home
The coming home function illuminates the
area outside the vehicle when you switch the
ignition off and open the driver's door. To turn
the function on, select
Lights when leaving
car > On .
The leaving home function illuminates the
area outside the vehicle when you un lock the
vehicle. To turn the funct ion on, select
Lights
when unlocking car > On .
The coming home and leaving home functions
only operate when it is dark and the light
switch is in the
AUTO position. Clear
vision 45
Turn signals and high beam lever
The lever on the left side of the steering col­
umn is used to operate the turn signals and
the high beam as well as
the headlight flash­
er.
Fig. 35 Tu rn signal and high beam lever
The turn signal and high beam lever has the
following functions:
Turn signals ¢ 9 ©@
.. 0 .... ~
.,. Push the leve r up as far as it can go to turn
on the right turn signa l or down to turn on
the left tu rn s ignal ¢
fig. 35.
... Move the lever briefly until you meet resist­
ance and re lease it to flash three times.
.,. Move the lever (up or down) until you meet
resistance and hold it there to determine
the flashing time for the turn signals.
High beam ~D @
... Push the lever forward to switch on the high
beam .
.,. Pull the lever back towards you to sw itch
off
the high beam.
Headlight flasher ~D ©
... Pull the lever toward the steering wheel to
use the headlight flasher.
Notes on these features
-The turn signals on ly work w ith the ignition
sw itched on. The indicator l ights
B or Bin
the instrument cluster¢ page 12 also blink.
-After you have turned a corner, the turn sig-
n al switches
off automatically.
- The
high beam works only when the head-
lights are on. The indicator light
El in the .,.

46 Clear vis ion
instrument cluste r illuminates when the
high beams are on.
- T he
headlight flash er works only as long as
yo u hold the lever - even if there are no
l ights turned on. The indicator light
II in
the instrument cluster il luminates when you
use the headlight flasher.
A WARNING
Do not use the high beam or headlight
flasher if you know that these could blind
oncoming traffic.
Interior lights
Front and rear interior lighting
Fi g. 36 Headliner: Front interior ligh ts
Fig . 37 Re ar headli ne r: Readi ng light
Press the appropriate button q fig . 36:
El-Interior lighting on/off
I]]-Door contac t sw itch . The inter ior lighting
turns on automatica lly when you unlock the
vehicle, open a door or switch the ignition off.
The interior lighting turns off several seconds
after you close the doors, when you lock the
vehicle or when you sw itch the ignition on.
When a door is open, the light t urns off afte r
a few minutes.
L:!l -Read ing lights on/off
~ - Switching the rear read ing lights on/off
from the cockpi t.
I" REARI * - Switching the rear reading lights
o n/off from the cockpit.
Ambience lighting
Applies to vehicles: with ambience lighting
You can adjust the br ightness for the ambi­
ence ligh tin g.
.. Select in the MMI: ICARlfunction butto n>
(Car )* sys tem s control button > Vehicle set­
ting s
> Interi or lighting > Brightne ss.
.. To increase or reduce the b rightness , turn
t he knob and press it .
T he ambience light ing tu rns on when you turn
t h e headlights on wh ile the ig nition is swi tc h ­
ed on.
(D Tips
The setti ng is automati cally sto red and as­
s igned to the remo te contr ol key t hat i s in
u se .
Instrument illumination
You can adjust the brightness of the instru­
men t and di splay illumination a s well as the
Head-up Display*.
Fi g. 38 Instrume nt illumina tion
... Press the knob to re lease it.
.. Turn the knob toward"-" or"+" to reduce or
increase the br ightness .
.. Press the knob aga in to return it to its origi-
na l posit ion . ...

windshield wipers move into the service
position .
Removing the wiper blade
• Fold the windshield wipe r arm away from
the windshie ld.
• Press the locking knob@<>
fig. 42 on the
wiper blade . Hold the wiper blade f irm ly .
• Remove the wiper blade in the direction of
the arrow.
Installing the wiper blade
• Inse rt the new wiper b lade into the mo unt
on the w iper arm @ until you hear it latch
into place .
• Place the w ipe r arm back on the windshie ld .
• Switch the ignition on .
• Press the w indshield wiper lever.
Or • Select :
ICAR I function button > (Car )* s ys­
tems
control button > Se rvic ing & checks >
Wiper service position > Off .
A WARNING
- If the windshield wipe rs smear the wind­
shield, clean the w iper blades with w ind­
shield washe r fl uid . If the wiper blades
are extremely d irty, yo u can also clean
th em with a soft sponge or cloth.
- For yo ur safety, you should repla ce the
w ipe r blades o nce or twice a year. See
yo ur a uthori zed Au di dealer fo r repl ace­
me nt blades.
(D Note
- The w indshield wiper blades must on ly
b e fo lded away when in the se rv ice po si­
tion! Otherw ise, you risk d amaging the
p ain t on the hood or the windshield wip ­
er motor.
- You s hould not move yo ur vehicle or
press the windshie ld wiper lever when
the wiper arms are folded away from the
windsh ield. The w indshield w ipers would
move back into the ir original position
and could damage the hood and w ind­
s h ield .
Clear vi sion 49
- T o help p revent damage to the wiper sys ­
tem, always loosen blades wh ich are fro­
zen to the winds hield before operating
wipers.
- To hel p pr event damage to wiper b lades,
do not use gaso line, kerosene , paint
thinner, or other solvents on or near the
wiper blades.
- To help prevent damage to the w iper
arms or other components, do not at­
tempt to move t he wipers by hand .
(D Tips
-Commercial hot waxes app lied by a uto­
matic car washes affect the cleanability
of the windshie ld.
- You can also use the service position, for
example, if you want to p rotect the
w indshield from icing by using a cover .
- You cannot activate the serv ice position
when the hood is ope n.
Mirrors
Adjusting the exterior mirrors
Fi g. 43 Fo rward sect io n of d river' s armr est: power mir·
ro r controls
Turn the knob to t he desired positio n:
Q/P -In this pos ition, yo u can adjust t he
driver's an d fro nt passenge r's exte rior mi rrors
by turning the knob i n the desired d irection.
Qiil -The mirrors are heated depending on the
outside tempe rature .
8 -The exterior mirrors fold in . In the MMI,
you can select if the mir ro rs fo ld in automati-
ca lly when you lock t he veh icle <>
page 35. ~

Adjusting the armrest
• To adjust the angle, raise the armrest from
the start ing position detent by detent.
• To bring the armrest back into its origina l
position, lift it above the top position and
then fold it back down.
Opening the storage compartment
• Press the button -arrow- upward.
Please note that the driver's arm movements
may be restricted w ith the armrest fo lded
down. For this reason, the armrest should not
be folded down when driving in c ity traffic.
Head restraints
Front head restraint s
Applies to vehicles : with adj ustable head restraints
Head restraints that are adjusted according
to body size, along with the seat belt, offer
effective protection.
Fig. 48 Fron t seat: Ad justing t he head restraint
Adjust the head restraint so the upper edge is
as even as possible with the top of your head.
I f that is not possible, try to adjust the head
restra int so that it is as close to this position
as possible
¢ page 55.
• To move the head restraint up or forward,
s lid e it until it locks into place.
• To move the head restraint down or back,
press the side button -arrow-¢
fig. 48 and
slide the head restraint until it locks into
place.
Refer to ¢
page 134, Proper adjustment of
head restraints
for gu idelines on how to ad-
Seats and storage 55
just the height of the front head restraints to
suit the occupant's body size.
A WARNING
- Driving without head restraints or with
head restraints that are not properly ad­
justed increases the risk of serious or fa­
tal neck injury dramat ically.
- Read and heed all WARNINGS
¢ page 134, Proper adjustment of head
restraints .
(D Tips
Correctly adjusted head restraints and
safety belts are an extremely effect ive
combination of safety features.
Rear head restraints
--
Fig. 49 Rear seats: Head restraint
Fig. 50 Rea r head res tra ints : release
If there is a passenger in the rear center seat­
ing position*, slide the center head restraint*
upward at least to the next notch ¢
A_.
Adjusting the head restraints
• To move the head restra int up, hold it at the
sides with both hands and slide it upward .,,.

56 Seats and storage
until you feel it lock into p lace c::> .& in Prop­
er adjustment of head restraints on
page 134.
• To move the head restraint down, press the
button -arrow-
c::> fig. 49 and slide the head
restraint downward .
Removing the head restraints
• Fold the backrest forward ¢ page 64.
• Move the head restraint upward as far as it
can go.
• Press the release
c::> fig. SO with the me­
chanical key¢
page 33 and the button
-arrow- ¢
fig. 49 . Pull the head restraint out
of the backrest at the same time¢ ,&.
Installing the head restraints
• Slide the posts on the head restraint down
into the guides until you feel the posts lock
into place .
• Press the button -ar row-
c::> fig . 49 and slide
the head restraint a ll the way down. You
should not be able to pull the head restraint
out of the backrest .
So that the driver can have a better view to
the rea r, the head restraints shou ld be pushed
down completely when the rear seats are not
occupied.
& WARNING
- Only remove the rear seat head restraints
when necessary in order to install a child
seat. Install the head restraint again im­
med iately once the child seat is removed.
Driv ing without head restra ints or with
head restraints that are not properly ad­
justed increases the r isk of serious or fa­
tal neck injury dramatically .
- Read and heed all WARNINGS
¢page 134.
Seat memory
Description
Applies to vehicles: with memory function
The memory function allows you to quick ly
and easi ly store and recall personal seating profiles for
the driver and front passenger*.
The memory function is operated through the
master key and the memory buttons in the
driver's/front passenger's* doors.
T he driver's seating profile is stored and as ­
signed to the master key each time the vehicle
is locked . The seating profile is reca lled auto­
matically when the vehicle is unlocked. If two
people use one vehicle, it is recommended
that each person always uses "their own" master key .
Two seating profiles can be stored in each of
the driver's/front passenger's* doors. Once
stored, these seating profiles can be recalled at any time.
The following sett ings are stored:
- --Remote Memory button
control
master key
Driver Driver Front
I
Seat
-Steering
wheel*
Both exterior
rearv iew mir­
rors*
X
X
X
Remote control key X
X
X
Applies to
vehicles: with memory function
passen­
ger
X
-
T o assign the driver's seat settings to the re­
mote control key when locking the vehicle, the
f unction must be switched on.
• Select:
!CAR ! function button> (Car)* sys­
tems
control button > Vehicle settings >
Seats > Driver seat > Remote control key >
On.
(D Tips
If you do not want another driver's set-
tings to be assigned to the remote control .,.

58 Seats and storage
Ashtray
Fig. 52 Center console: front ashtray~
Fig. 5 3 Rear ashtray
Opening /clo sing
.. To open the front ashtray, slide the cover
up .
.. To close the front ashtray, press down on
the cover.
.. To open the rear ashtray, tap the cover on
t h e rim.
Emptying
.. To empty the front ashtray, pull it upward
and out .
.. To empty the rear asht ray, press the rear
s ide of the cover down w hen it is open
Q fig. 53. T he ashtray will lift up out of its
mount.
.. To i nse rt t he ashtray again, press it down in ­
to the mount until it locks into p lace.
_&. WARNING
Never put waste paper in the ashtray. Hot
ashes or other hot objects in the ashtray
could set waste paper on fire.
Cigarette lighter
Applies to vehicles: wit h cigaret te lighter
Fig . 5 4 Center console: cigarette lighter
.. Push the knob on the cigarette lighter in .
.. Remove the cigarette lighter when it pops
out.
_&. WARNING
The cigaret te lig hter on ly works w hen t he
i gnition is switched on. Incorrect usage
can lead to ser ious injuries or burns. For
this reason, children should never be left
unattended in the veh icle because this in­
creases the risk of inj ury .
12-volt sockets
Fig. 55 Sect io n of the tr im pane l of t he luggage com·
part men t: 12 -vo lt socket
•
F ig . 56 Rear center console: 12 -vo lt socket
0 0 0 Cl ~ a,