18 Instruments and warning/indicator lights
9:::r. Engine oil pressure malfunction
The re d engin e oil pr essure warning symbol
require s immediat e ser vice or repair . Driving
with a low-oil- pre ssure indicat ion is lik ely to
inflic t seve re damage to the engine .
• Switch off engine and check oil level
If the indicator light turns on and the mes
sage appears , the oil pressure is too low.
,,. Pull
off the road.
"' Stop t he ve hicl e.
,,. Turn
off the engine.
"' Check the engine oil level¢ page 235 .
• If the engi ne oil leve l is to o low, add engine
o il ¢
page 235 . Make sure that the oil p res
s ur e warning symbol. appea rs no longe r
i n t he d is pl ay before y ou sta rt driving again .
• If the engi ne oil leve l is c orre ct and t he ind i
cat or lig ht still t urn s on, tur n t he eng ine
off
and do not conti nue d riving . Seek p ro fessio
nal assistance .
(D Tips
- The engine oil pressure symbol. is
not an indicator for a low engine oil lev
el. Do not rely on it. Instead, check the
oil level in your engine at regular inter
vals, preferably each time you refuel,
and always before going on a long trip.
- The yellow oil level warning indication
II requires oil refill or workshop serv
ice without delay . Do not wait until the
red oil pressure warning. starts to
flash before you respond to the low oil level warning
11-By then, your engine
may already have suffered serious dam
age.
~ . Engine oil level
• WARNING: Please add oil immediately
When the sy mbo l and t he dr ive r message a p
pear, the oil has to be reple nis he d rig ht no w
¢page 232.
If t he in dicator light and the message appear,
a dd engine oil imme diate ly
¢ page 235 .
II Add oil, max. x qt (l). You may continue
driving
W hen the sy mb ol an d the d river message a p
pear, add the amoun t of oil appe aring in the
display at the nex t op port unity ¢
page 232.
® -e Steering column lock
• Do not drive veh icle: Steering defective
If t he indic ato r ligh t turns on an d the mes
sage a ppears, there is an e lec tronic stee ring
co lumn lock malfunct io n. You cannot switc h
t h e i gnit io n on.
Do
not tow yo ur vehicle becau se it c annot b e
stee red. See k professiona l assistance .
!Ill Steering lock: system fault. Please con
tact dealer
If th e indicato r light turns on and the mes
sage appears, there is an e lectronic steering
co lu mn l ock malfunct io n.
Drive to y our auth orized A udi dealer immedi
ately to hav e th e malfunction corr ecte d.
A WARNING
-~
Yo ur v ehicl e m ust no t be tow ed in t he
event of a malfu nction in the elec tronic
stee ring colum n lock be cau se it ca nno t be
s teere d due to th e l ock ed steeri ng. If it is
towe d wit h the s teeri ng locke d, there is
the r isk o f an accide nt.
© -e Engine start system
• Engine start system fault . Please con
tact dealer
If the indica to r ligh t turns on and the mes
sage appears, do
not switch the ig nition off
because you may not be a ble to sw itch it on
again.
Dr ive to your au thor ized A udi dea ler immed i
ate ly to have the ma lfunction corrected.
Ill Engine start system fault . Please con
tact dealer
Instruments and warning/indicator lights 19
If the indicator light turns on and the mes
sage appears , there is a ma lfunction in the en
g ine start system.
Drive to your authorized Aud i dea ler immedi
ately to have the mal function cor rected .
0 Air suspension
Appl ies to vehicles: with a ir suspe nsio n
• Air suspension: system fault. Can contin
ue slowly with ma x. 35 mph .
There is a malfunction that can resu lt in re
stricted driving stability .
Carefully drive at a maximum speed of 35
mph
(60 km/h) to your authorized Audi dealer
or qualified workshop to have the malfunction
corrected .
• Air suspension: service mode. Vehicle
can only be moved with restrictions
Carefully drive to your authorized Aud i dealer
or qualified workshop immediately to have
the service mode deactivated.
l!I Air suspension fault
There is a system ma lfunction that can result
in restr icted driving stability or reduced
ground clearance.
Drive to your authorized Audi dea ler immedi
ately to have the malfunction corrected.
l!I Air suspension: vehicle too low. Ground
clearance reduced
The ground clearance is very low due to a sys
tem malf unct io n. Wait until the air suspen
sion system has restored normal gro und clear
ance . Otherwise, conditions such as an uneven
road surface can lead to vehicle damage.
~/ !f Safety systems
The fl (USA models) !fll (Canada models) in
dicator light monitors the safety systems (e .g.
a ir bags, pretensioners) and illuminates for a
few seconds each time you switch the ignition
on . If the
fl (USA models)
Jfll (Canada models)
indicator light does not go out, or if it illumi
nates while you are driving, or if it starts to
blink, then there is a malfunction somewhere
in the system. If the light does not illuminate
when you switch the ign ition on, th is also
mea ns there is a malfunct io n.
A WARNING
If you have a ma lfunction in the safety sys
tems, contact your authorized Audi dealer immediately. Otherwise the safety sys
tems may not work properly in an acc i
dent.
f!;.J fj Electronic Stabilization Control
(ESC)
This warning/indicator light monitors the
Electronic Stabilization Control .
When you switch the ignition on, the indicato r
light
G1 turns on briefly to check the function.
If the
G1 indicator lamp blinks while dr iv ing,
the ESC or ASR (Anti-Slip Reg ulation) is active
ly reg ulat ing.
If the
Ji1 indicator lamp illuminates, the sys
tem has switched the ESC
off.
If the indicator light II turns on, the ESC was
switched to ESC sport mode with the button
[!]~page 196. If this is case , you can reacti
vate the ESC by switching the ignition
off and
then on again. The warning/ indicator light
sho uld go out to show that the system is fully
functional again.
Stabilization control (ESC/ABS): Fault! See
owner's manual
If the indicato r light GI and the ABS indicator
li ght
B (USA models) ,1iJ (Canada mod
els) tu rn on and the message appears, there is
a malfunction in the ABS system or electron ic
differential lock. This also inte rr upt s the ESC.
The brakes still function with their norma l
power, but ABS is not active .
Drive to your authorized Audi dealer immedi-
ate ly to have the malfunction corrected. .,..
20 Instruments and warning/indicator lights
If the battery te rm inals were disconnected
and re-connected, the vehicle was j ump sta rt
ed or the batte ry is very weak, the ESC sensor
system goes through a learning process for
the first few yards. The warning/ind icator
light illuminates . The war ning/ indicato r light
goes out as soon as the learning proc ess is
comp lete .
For more informat io n about t he ESC
¢ page 196.
ABS/( @) Anti-lock braking system (ABS)
This warning/indicator light monitors the ABS
and the electronic differ ential lock (EDL).
The warning/indicator light E (USA mod
e ls)
;£1 (Canada mode ls) will come on fo r a
few seconds when the ignition is switched on.
The light will go out after an a utomat ic chec k
se quence is completed .
There is a malfunction in the ABS when :
-The warning/ indicator lig ht d oes not ill umi
nate whe n you switch the ign ition on.
- The wa rning/i ndicator lig ht does not go out
after a few seconds .
- The warning/indicator lig ht illumi nates
wh ile driving.
T he ESC ind ic a tor light a lso ill umin ates if
the re is a mal func tion in the A BS. T he mes
sage
Stabilization control (ESC/ABS ): Fault!
See owner's manual
a lso appears in the in
strument cluster disp lay and a warning tone
s o unds .
The brake system will still respond even
without the assistance of the ABS system .
See your authorized Audi dealer as soon as possible to restore full braking performance.
For more informat io n regarding the ABS
¢ page 196.
Malfunction in the brake system
If the brake wa rn ing light ¢ page 15 and the
ABS warning ill uminate
together there may be
a ma lfunction in the ABS, and there may also
be a ma lf u nct ion in the brake system itself
c::> /1. . The ABS will not work and you will no- tice a change in braking respon
se and per
formance .
In the even t of a malfunction in the brake
system
t he warning/ind ic at or ligh t 11111
(U SA mode ls)/ . (Canada models) in the in
str ument cl uster flas hes
c::> page 15 .
Malfunction in the electronic differential
lock (EDL)
The E DL works toge ther w it h the AB S. T he
ABS wa rnin g light wi ll come on if there is a
malfu nction in t he EDL system
c::> page 196.
See your author ized Audi dealer as soon as
poss ib le .
A WARNING
-- If the E (USA mode ls)/ rl] (Canada
mo dels) warning light does not go ou t,
or if i t com es on whi le driving, t he ABS
s y st em is not wor king pr ope rly. The vehi
cle can the n be st opped only wit h the
s ta nda rd b ra kes (withou t A BS) . Yo u w ill
not have the protect ion A BS provides .
Contact your Audi dea le r as soon as pos
sible.
- USA models: If t he 11111 warning light,
the
J_j) wa rnin g light and t he E warn
ing light come on together, the rear
wheels could lock up f irst under hard
b rak ing. Rear wheel lock-up can ca use
loss of vehicl e co ntrol and an accident.
Hav e your ve hicle repair ed imm ediat ely
by y our authori zed A udi deale r or a quali
fi ed work sh op. Dr ive slo wly and avoid
sud de n, hard bra ke applicat ions.
-Canada models: If the br ake w arn ing
ligh t. , the
G1 wa rning light a nd th e
A BS warning ligh t
SJ come on together,
the rear wheels could lock up first under
ha rd br aking. Rea r whee l loc k-u p can
cause loss of vehicle con tro l an d an acci
dent. Have your veh icle repa ired immedi
ately by your authorized Audi dealer or a
qualified works hop. Drive s lowly a nd
avoid sudde n, hard b ra ke app lications.
-
Instrument s and warnin g/indic ator ligh ts 21
(0 ) Worn brake pads
rl] Brak e pad s!
If the warn ing light illum inates, immediately
contact your authorized Audi dealer or quali
fied workshop to have all brake pads inspect
ed. On USA models the wa rning light
rl]
comes on togethe r with the warn ing light
.. . Both sets of b rake pads on an axle
must always be replaced at the same time .
~ WARNING
Driving with bad brakes can cause a coll i
sion and serious personal injury.
- If the warning light rl] and the wa rning
light ..
1> with the message Bra ke
pads !
comes on in the instrument cluster
display, immediately contact your au
thorized Aud i dea ler or qualified work
shop to have all brake pads checked or
replaced if necessary .
EPC Electronic power control
This warning/indicator light monitors the
electronic power control .
The Im warning/ indicator light (Electron ic
Power Control) illuminates when you switch
the ignition on as a function check .
(!) Tips
If this wa rning/indicator light ill uminates
while you are dr iving, then there is a mal
function in the engine electron ics . Have
the malfunction co rrected as soon as pos
sible by you r autho rized Aud i dea le r or
qua lified repair fa cility.
o Malfunction Indicator Lamp (MIL)
The Malfunc tion Ind icator Lamp (M IL) is par t
of the On -Boa rd Diagnostic (OB D II) system.
The symbol ¢• tights up when the ignition is
switched on and w ill tur n off after the engine
has started and has sett led at a constant id le
1 ) - : USA mod els on ly
-
speed. This indicates that the M IL is work ing
properly .
T he wa rni ng lig ht ill uminates w hen the re is a
malfu nction in t he engine electron ic system .
Contact your a uth orized Audi dea ler and have
the malfunction corrected .
An imprope rly closed fuel fille r cap may a lso
ca use the M IL light to illuminate~
page 2 2 7 .
Fo r more information ~ page 29.
!?) Engine speed limitation
App lies to vehicles: wit h eng ine speed limitat ion
(I! Engine sp ee d maximum XXXX RPM
The eng ine speed is automatically limited to
the speed d isplayed in the driver information
system. Th is protects the engine from over
heating.
The eng ine speed limitation deactivates once
the engine is no longer in the critical tempera
tu re range and you have re leased the accelera
tor pedal once.
If the engine speed limitation was activated
by an engine control malfunction, the indica
tor light
Im a lso tu rns on. Make sure that the
speed does not go above the speed disp layed.
Drive to your authori zed A udi dealer immedi
ate ly to have the ma lfunction corrected.
~. Engine oil level
II Add oil, max. x qt (l). You may continue
dri ving
When the symbol II and driver message ap
pear, add the amount of oil appearing in the
display at the next opportunity ~
page 235.
~tt• Engine oil sensor
Ill Oil level! Sensor defective
If the symbol illumina tes, contact yo ur au
thorized Audi dea ler and have the oil sensor
inspected. Until yo u have this done, check the .,..
22 Instruments and warning/indicator lights
oil leve l each time you re fuel just to be on the
safe side¢
page 235.
Bi) Fuel level indicator
II Please refuel
If the indicator light turns on fo r th e f irst
time and the message a ppears, there are
about 2 .6 gallons (10 liters) of f ue l left in the
tank . Time to refuel¢
page 226.
(I Tank sy stem malfunction! Contact dealer
If t he indicator light tu rns on and th is mes
sage a ppears, t he re is a ma lfu nc tion in the
ta nk syste m.
D rive to yo ur autho rized Aud i deale r immedi
ately to have the malfunction cor recte d.
<;;:> Windshield washer fluid level
-· Please refill wa sher fluid
If the symbol illum inates, add windshield
washer fluid to the washer system/headlight
washer system *¢
page 244.
~ Windshield wipers
t•5 Wind shield wiper defective
Th ere is a malfunct io n w ith the w indshield
wipers .
Drive to yo ur autho rized Aud i deale r immedi
ately to have the malfunc tion cor rected .
i§il0$ Defective light bulb warning
ra'J -If the ind icator light turns on, a b ulb has
fa iled. The message indica tes the loca tion o f
the bulb .
II-if a rea r fog lam p has fa iled, the ind icator
light t urns on to indica te the locat ion on t he
ve hicl e.
Vehicle lights: malfunct ion
If the message appears, there is a mal func
ti on in the headlights or lig ht switch . D
rive to your authori zed A udi dealer immedi
ate ly to have the ma lfu nction corrected.
A WARNING
-- Light bu lbs a re p ress urized and could ex-
p lode w hile they are being changed ca us
ing serio us pe rsonal i njury.
- Wo rk with due care when hand ling the
h igh-vo ltage sect io n o f gas discharge
(xenon) lights. Failure to d o so could re
sult in death or ser ious injury .
(D Tips
Have the b ulb re placed or the connect ion
r epaire d by y our authorized Audi Service
department .
§.0 Headlight range control
IS Headlight range cont rol : defective!
If the symbol illum inates, the headlig ht range
control is no longer work ing properly. Have
the system checked and repaired at you r A udi
deal er.
§: D Adaptive Light
Applies to veh icles: w it h Adapt ive Light
l;J Audi adaptive light: system fault
If the indicator light turns on and this mes
sage appears , there is a malfunct ion in the
adaptive ligh t syst em. The head lights s till
f unct ion.
Go to an author ized dealersh ip to have the
headlights o r th e control un it for the Adaptiv e
Li ght re paired .
@) Light/rain sensor
II Automatic headlights /automatic wipers :
system fault
If the indicato r ligh t turns on and this mes
sag e appea rs, the light/ rain senso r is not
f unc tioni ng co rrec tly.
For safety reasons the low beams are t urned
o n pe rmanently with the sw itch in
AUTO . II>-
Instrument s and warning /indicator lights 23
However, you can continue to turn the lights
on and off using the light switch . You can still
control all funct ions that are independent of
the rain sensor through the windshield wiper
lever.
Contact your authorized Audi dealer as soon
as possible to have the prob lem corrected .
I--i Sport differential
Applies to vehicles: with spo rt differe ntial
(II Sport differential: system fault
There is a malfunction with the sport differen
tial.
Drive to your authorized Aud i dealer immedi
ately to have the mal function corrected .
(II Sport differential : overheating
The transmission temperature has increased
sign ificantly due to the sporty dr iving manner .
Drive in a less sporty manner until the tem
perature returns to the norma l range and the
indicator light switches of.
& WARNING
Contact your authorized Aud i dealer or a
qualified workshop if the sport differential
is faulty or ma lfunctioning. The repair
must be performed by trained personnel
using the correct oil in order to ensure
safety .
¢i Q Turn signals
-
The indicator light blinks when you use either
turn signal .
Whenever you use the left. or the right a
turn signal, the indicator light blinks. When
you use the emergency flashers, both indica
tor lights f lash.
If one of the turn s ignal light bulbs burn out,
the turn signal will blink twice as fast as nor
mal. Carefully drive to your authorized Audi
de aler immediately to have the malfunction
correc ted. The indicator light does not indi
cate a malfunction if a turn signal on the trail- er or on the vehicle
fails in trailer towing
mode.
a) Tips
For more information on the turn signals,
refer to
¢ page 45.
CRUISE t •(-') Crui se cont rol
The warning/indicator light IB;(l)~i~ (USA mod
els)/lil (Canada models) illuminates when
the cruise control is activated¢ page
83.
Driver information
display
Overv iew
Fig. 4 Drive r informat io n sys te m in th e in strument
cl uster
Fig. 5 Disp lay: example of t he info rmatio n line
The driver information system contains infor
mation @that is displayed on tabs @
¢
fig. 4 . The following content is possible de-
pending on vehicle equipment: ..,.
24 Instruments and warning /indicator lights
@
Tab
1
2
3
4
5
6
®
Content
Vehicle functions:
On-board computer ¢page 25
Efficiency program*¢ page 26
Digital speedometer
Cruise control*¢ page
83
Adaptive cruise control and braking
guard* ¢page
86
Audi active lane assist* <::;>page 95
Display darkened
Indicator lights and messages
Warning when a door, the hood or the rear lid is not closed
Service interva l display¢ page
28
Speed warning system ¢ page 83
Night vision assistant*¢ page 105
Audio/video
Telephone*
Navigation*
The second and third tabs are only visib le if at
least one indicator light or message is shown
or if that system is switched on.
The status line© is located in the bottom
part of the display ¢fig.
4. It displays the ex
terior temperature, time, selector lever posi
ti on, trip odometer and odometer.
F or some vehicle functions, you can access the
tr ip informat ion from the temporary memory
¢ page 25 in the line (D ¢ fig. 5.
A WARNING
-
-Never rely exclus ively on the outside
temperature display to determine if a
road surface is icy or not. Keep in mind
that road surfaces, especially bridges
and overpasses, could be ice covered and
slippery even at an outside temperature
above 41 °F ( +5 °C) .
- Always remember, even if the "snow
flake" symbol (ice warning) does not ap
pear in the display, black ice could be on
the road. -
Always reduce your speed and drive with
special care in cold weather conditions
when the chance of encountering icy
road surfaces increases.
(1) Tips
- At temperatures below 14 °F (+ 5 °() a
snowf lake symbol appears ahead of the
temperature display. It is intended to re m ind the driver to pay special attention
to
ice on the road <::;> .&,. If the vehicle is
stationa ry, or if you are driving at a very
low speed, the temperature shown in the
display might be slightly hig her than the
actual outside temperature. This is
caused by the heat being radiated from
the engine .
- You can select the units used for temper
ature, speed and other measurements in
the MMI.
- For information on the audio/video and
navigation* functions, refer to the sepa
rate MMI owner's manua l.
Instrument s and warning /indicator lights 25
Operation
The driver information system is operated us
ing the buttons on the multifunction steering
wheel.
Fi g. 6 Mu ltifunction stee ring wheel: operating the driv
er info rmatio n system
Fig . 7 Driver informat ion system: open ing the ve hicle
functio ns m en u
Operating concept
• Switch the ign ition on.
• To sw itch betwee n the tabs, p ress the ro ck
er switch (!) to the le ft or r ight ¢
fig. 6.
• To access additional i nfo rmatio n be low or
above, rotate the thumbwheel @down or
u p.
• To confirm a se lection, press the thumb
wheel @.
• Press the
Ii] button ® to ope n a submenu
for an act ive tab .
• Press the butto n
© to access a func tion fo r
t h e prog ram mable stee ring w heel button*.
Accessing Vehicle functions
• Se lect th e first tab with the rocker switch
@.
• Press the bu tton Ii! @. The Vehicle func
tion s
menu appears Q fig . 7.
• To select a menu item, turn a nd press the
t hu mbwheel @.
Resetting values to zero
• Sele ct th e on-board computer / Efficiency
program
menu item in the Vehicle func·
tions
men u.
• Yo u can now select between the long-term
memory and short-term memory.
• To reset the values in a memory, press and
hold the thumbwheel @for one second.
Assigning a function to the
programmable steering wheel button*
• Select: I CAR ! function butt on > (Car) * sys
tems
control button > Vehicle settings >
Steering wheel button .
The last function selected disp lays when you
switc h the ignition on.
On-board computer
You can ca ll up the fo llowi ng i nfo rmation in
the on -board computer :
- Date
- Dr iv ing t ime (h) from the short-te rm memo-
ry
- Average consumption in MPG ( l/100 km)
from the shor t-te rm memory
- Average speed i n mph (km/h) from the
short-te rm memory
- Distance driven in miles (km) from the
short-te rm memory
- Cur rent fuel consumption in MPG (l/100
km)
- Short-term memory overview
- Long-term memory overview
The short -te rm memory collects driv ing infor
mation from th e time the ig nition is switc hed
on until it is switched off. If you continue driv
i ng within two ho urs after switch ing the igni
tion off, the new values are incl uded when cal
cu lating the current trip information .
U nlik e the short -term memory, the long-term
memory is not erased automatically. You can
select the time period for evaluating trip in
fo rmat ion yourse lf.
Fo r some vehicle f unct ions, you can access the
trip information from t he temporary memory
in the line
(D ¢ fig. 5. ..,_