2013 AUDI A5 COUPE garage door opener

Homelink®
Universal remote
control
Description
Appl ies to vehicles: with Horne Link
The Homelink universal remote control can
be programmed with the remote control for
devices that are already present.
With Home Link, you can control devices such
as the garage door, security systems, house
l ights, etc. comfortab ly from the inside of you
vehicle .
H ome Link makes it possible for you to rep lace
three differen t remote controls from dev ices
in your home with one universal remote. This
feature works for most garage door and exte­
rior door motor signals. Programming the in­
dividual remote control for your remote con ­
trol takes p lace near the center of the radiator
grille. There is a control module attached at
this location.
A one-t ime programming of the sensor must
be performed before you are able to use sys­
tems with Homelink. If the system does not
activate after performing the one-t ime pro­
gramming, check whether the system uses a rolling codec:>
page 122 for veh icles without
the MMI*.
_& WARNING
- Never use the Homelink ® transmitter
with any garage door opener that does
have not the safety stop and reverse fea ­
ture as requ ired by federa l safety stand­
ards. This includes any garage door open­
er model manufactured before April 1,
1982.
- A garage door opener which cannot de­
tect an object, signaling the door to stop
and reverse does not meet current feder­
al safety standards. Us ing a garage door
opener without these features increases
risk of serious injury or death.
Homelink ® 119
-For safety reasons never release the
parking brake or start the engine while
anyone is standing in front of the vehicle.
- A garage door or an estate gate may
sometimes be set in motion when the
Homelink ® remote control is being pro­
grammed. If the device is repeatedly ac­
tivated, th is can overstrain motor and
damage its e lectrical components -an
overheated motor is a fire hazard!
- To avo id possible injuries or property
damage, please always make abso lutely
certain that no persons or objects are lo­
cated in the range of motion of any
equipment being ope rated .
(D Tips
-If you would like more information on
Homelink ®, where to purchase the
Homel ink ® compatible products, or
would like to purchase the Homelink ®
Home Lighting Package, please call to ll­
free: 1-800-355-3515.
- For Declaration of Compliance to United
States FCC and Industry Canada regu la­
tions c:>
page 276.

120 Homelink® Programming the transmitter (version
A)
Applies to vehicles: with Homelink
Fig. 123 Head line r: controls
Fig. 124 Dista nce between the radiator grille and the
hand transm itter
You can program the fixed code and rolling
code systems using the described procedure.
Programming the button
.,. Turn the ignition on .
.,. There are two ways to program the button:
Press the button
q fig. 123 that you would
like to program . Use the instructions that
appear in the MMI* to perform the program­
ming. Or
.,. Select :
~IC~A~R~I function button > Car sys­
tems*
control button > Vehicle settings>
Garage door opener> Program garage door
opener .
.,. Select the button that you would like to
program.
.,. Follow the instructions in the
MMI*.
.,. If the garage door opening must also be
synchronized with the Homelink module,
refer to the owner's manual for the garage
door opener.
Remote control units for garage door openers
in Canada are set to stop transmitting radio frequency
signals after two seconds. This time
may not be sufficient for the Homelink sys­
tem to learn the radio frequency signal. Per­
form all other steps as described above.
Operating the button
.,. Press the programmed button to open the
garage door. The LED@blinks or illumi­
nates .
.,. Press the button again to close the garage
door.
Erasing/Clearing the programmed button
settings
.,. To erase all of the programmed buttons at
the same time, select:
I CAR ! function button
> Car System* control button > Vehicle set·
tings
> Garage door opener> Clear pro­
gram settings> Yes .
The programmed but­
tons can not be erased individually. Repro­
gram the buttons if necessary .
.,. Reprogram an individual button in the same
manner that you would for the one-time
programming .
Displaying the version/status/country
code
.,. Select: !CAR ! function button> Car sys­
tems*
control button > Vehicle settings >
Garage door opener > Version information .
@ Tips
- Programming using the MMI* is not
available for all vehicle versions.
- The required distance between the hand
transmitter and the Homelink module in
the radiator grille
q fig. 124 depends on
the system that you are programming .
- Depending on the model of the garage
door opener, you may need to release the
button on the remote and press it again
when programming. When program­
ming a new device, keep the button
pressed for at least 15 seconds before
trying again with the transmitter in a dif­
ferent position . Watch out for the emer-
gency flasher during that time. .,..

-For security reasons, we recommend that
you clear the programmed buttons be­
fore se lling the vehicle .
Programming the transmitter (version
B)
Applies to vehicles: with Home Link
,,,,, r ,o :O·,) ,,;;~
®
Fig. 125 Hea dli ner: c o n tro ls
Fig. 126 Dis ta n ce betw een th e radiato r gri lle a nd the
hand t rans mitte r
Programming: phase 1 on the control unit
l. Switch on the ignition (do not start the
engine) .
2 . Press and hold both of the outer Home­
Link buttons ¢
fig. 125 unti l the LED @
turns off completely (about 20 seconds).
This procedure clears the standard codes
that were set at the factory and does
not
need to be repeated again to program the
other buttons .
3 . Briefly press the Homelink button that
you would like to program .
4. Wait until the LED @beg ins to blink
quickly . The Homelink module will now
remain in learning mode for 5 minutes.
5 . Now stand in front of your vehicle with
the original hand transmitter for the ga­
rage door opener or for the device that
Homelink ® 121
you wou ld like to allocate to the Home­
Link button .
Programming: phase 2 on the radiator
grille
6. Hold the or iginal hand transmitter some­
what towards the center of your vehicle's radiator grille ¢
fig. 126.
7. Now activate (press) the hand transm it­
ter.
8. Pay attention to the turn sig nals for your
vehicle when activating the hand trans­
mitter .
If the emergency flashers blink
three times, the programm ing was suc­
cessful. If the emergency flasher only
blinks one time, the 5 minute time lim it
for the adaptation has expired or the pro­
gramming was unsuccessful. Repeat the
programming from step 3 on the controls
or se lect another distance from the radia­
tor grille.
9. If the garage door or other devices still
fail to be activated with the Homelink control buttons after programming is
completed, it is possible that these sys­
tems might be working with a roll ing code
instead of the normal fixed code . A
Roll­
ing code programming must be per­
formed
¢ page 122 .
Program the remaining two buttons according
to the instructions ment ioned above . Begin
similarly with the 3rd step if the program­
ming connection was successful for the f irst
button .
Remote contro l units for garage door openers
in Canada are set to stop transmitting radio
frequency signa ls after two seconds . This time
may not be sufficient for the Homelink sys­
tem to learn the radio frequency sign al. Per­
form all other steps as described above.
Pressing a button
.,. To open the garage door, press the pro­
grammed b utton. The LED @ will light up or
flash .
.,. To close the garage door, press the button
aga in.

122 Homelink®
Erasing the button s
.. Switch on the igni tion (do not start the en­
gine) .
.. Press and ho ld both of the o uter buttons
until the LED @ turns off complete ly (about
20 seconds) to erase all of the buttons si­
multaneously .
.. Programmed buttons cannot be erased indi­
vidually . Reprogram the buttons if necessa ­
ry.
Reprog ramming the button s
.. Switch on the ignition (do not start the en­
gine).
.. To reprogram an ind ividual button, press
and hold the des ired button unt il the L ED @
begins to blink (about 10 seconds) . Re lease
the button .
.. Wait until the L ED@ begins to blink quic k­
ly . T he Homelink module will now remain in
l earning mode for 5 minutes .
.. Cont in u e with step 5 .
(D Tips
-The requ ired distance between the hand
transmitter and the Homelin k module in
the radiator grille¢
fig. 126 depends on
the system that you are programming.
- Depending on the mode l of the garage
door opener, you may need to release the
button on the remote and press it again
when programming. When program­ ming a new dev ice, keep the button
pressed for at least 15 seco nds befo re
trying again with the transmitte r in a dif­
ferent pos it ion. Watch out fo r the emer­
gency flasher duri ng t hat time.
- Fo r secu rity reaso ns, we recommend that
you clear the programmed but tons be­
fore se lling the vehicle.
Programming the rolling code
Applies to veh icles: w ith Homelink
Additionally, a rolling code programming for
the Homelink universal remote control is re­
quired for some systems .
Identifying the rolling code
.. Press the previously programmed HomeLink
button again and hold it down .
.. Look at the LED@¢
page 121, fig . 125 . If
the L ED blinks q uickly, the feat ures, such as
the garage door opene r, a re eq uipped w ith
t he rol ling code.
.. Program the rolling code as follows:
Activating the garage door opener motor
unit
.. Locate the setting but ton on the garage
door opene r motor un it. The exac t loca tion
and colo r of the bu tton may vary depending
on the garage door opener manufacturer .
.. Press the setting button on the garage door
opener motor unit ( usua lly this will activate
a "setting light display" on the motor unit).
Now you will have about
3 0 seconds time to
pe rform the Homelink button programm ing
on the controls .
Programming on the controls
.. Quickly press the p rev iously programmed
Homelink b utton .
.. Press the Home link button once more to
end the roll ing code programm ing .
After the controls have been programmed, the garage door opener s hou ld recognize the
Homelink signa l and operate when the Home ­
Li nk button is pressed. Now you may program
the other buttons as needed .
(D Tips
-Programming the rolling code can be
performed quicke r and more easily with
th e help of a second person. The Home­
Li nk button may need to be pressed a
t hird t ime to en d the adjus tment pro ce ­
dure for some garage door openers.

-If difficulties should arise when pro­
gramming the ro lling code, consu lt the
operating instructions for the garage
door opener or other devices for poss ible
solutions.
Homelink ® 123

Front passenger's door emergency locking 3 7
Front seats Adjusting .. ............. .... .. ... 126
C hi ld restra ints in the front seat . .. .. . 14 3
Fue l
Addit ives . ..... ........... ... ... .. 211
Blended gasoline .............. .... 211
Consumpt ion . . . . . . . . . . . . . . . . . . . . . . 25
Fill er ne ck .. .. ........... .. .. .. ... 2 13
Fu el gauge . ............. .. .. .. .. .. 12
Gasoline ... .... ...... ... .. .. .. ... 211
Gasoline additives ..... ... .. .. .. .. . 2 12
L ow fuel level symbo l . . . . . . . . . . . . . . . 21
Octane rating ............ .... .. .. . 211
Recommendation . . . . . . . . . . . . . . . . . . 211
Refue lling ..... ........... ... ... .. 213
Reserve .. ..... ........... ... ... ... 1 2
Tank capacity ............... ... ... 271
Tank system ............. .... .. .. .. 2 1
Un loc king the f ue l filler fl ap by hand . . 215
Fuel economy messages (eff iciency pro-
gram) ..... ... ...... ............. ... 29
F ue l filler flap
Unlock ing the fue l filler f lap by hand 215
F uses
Assignment . . . . . . . . . . . . . 2 59 , 26 0, 26 1
Replacing . ... .... .... ... .. .. .. ... 259
G
Garage door opener (Home Link) .. .. .. . 119
Garment hooks . . . . . . . . . . . . . . . . . . . . . . 60
Gas discharge lamps ..... ... .. .. .. .. . 262
Gauges Eng ine coolan t temper ature .. .. .. .. .. 10
Fu el gauge ... .. .. .... ... .. .. .... .. 12
Tac hometer . . . . . . . . . . . . . . . . . . . . . . . 11
Gea r recommendat ion . . . . . . . . . . . . . . . . 28
Gearshift ind icator ......... .. .. .. .. .. 27
Gea rshift lever
6 -speed manual transmission ... .. .. .. 82
Ge ne ral illustra tion
I nstruments and controls . . . . . . . . . . . . . 8
Generator (warn ing/indicator lights) .. .. 17
Glossa ry o f tir e and load ing te rm ino logy 232
Glove compartment . . . . . . . . . . . . . . . . . . 60
GPS controlled clock ..... ... .. .. .. .. .. 1 2
Inde x 283
Gross Vehicle Weight Rating (GVW R) ... 269
H
Head lights
C leaning sys tem . ... .. .. ...... ... .. . 49
De fective . . . . . . . . . . . . . . . . . . . . . . . . . 21
Head light range control ..... ... .. .. . 22
Left hand drive, r ight hand drive .. .. .. . 4S
Travel mode . . . . . . . . . . . . . . . . . . . . . . . 45
Head light washer rese rvoir .... ... .. .. 2 30
Head restraints .. .. .. ... ....... .... . 127
Adjusting ....... .. ........ 56, 57, 127
Remov ing/ instal ling .. ......... .. .. . 57
Heated exter ior mirro rs .. .... ... .... .... .. . 46
r ear w indow ..... .. ..... ........... 69
seats ........ ... .. ..... ........... 69
windshield washer sp ray no zzles . .. .. . 49
Heating ...... .. ...... ............. . 67
Heavy clothing and safety be lts . ... .. .. 137
Hig h beam .. .. .. .. .. . .. .... .... .. .. . 44
Hig h voltage warning label ......... .. 269
Hill des cent con tro l .. .. ......... .. .. . 91
Homelink (remote control)
Hood 119
Opening . ... .. .... . ... ...... ... .. 216
Re lease lever .. .. ............. .... 216
Horn ...... .. .. .. ................... 8
How are child rest raint system anchors re -
lated to ch ild safety .. .. .. ...... .... . 180
How many a irbags does my vehicle have? 149
How ofte n should I che ck my tire pres -
s ur es? ..... .. .. .. ... ............ .. 238
How safety belt pretens ioners work .... 140
Hydrop laning ..... ... .. .. ..... ... .. 242
I
Ign it ion
switching on/off .. .. . ... ...... ... .. . 71
Ig nition key
E mergen cy un lo ck ing ........... .. .. . 35
Ig nition lock .. .. .. .. ............... . 71
Ind icator light ... .. . .. .... .... .. .. . 18
Malfunction . . . . . . . . . . . . . . . . . . . . . . . 23
Immobilizer . . . . . . . . . . . . . . . . . . . . . . . . 12
•
•